Programme
Sun, 7 13
Sun, 7 13 14:00 - 17:00
Registration
Foyer of Conference Rooms: InterContinental Hotel
Room: Foyer AreaSun, 7 13 18:00 - 19:00
Welcome at the La Coquina
Room: La Coquina / Alcove / Hemingways
Chair: Josua P Meyer (University of Pretoria, South Africa)
Mon, 7 14
Mon, 7 14 7:00 - 17:00
Registration
Room: Foyer Area
Mon, 7 14 8:15 - 8:40
Opening
Opening by Conference Chair: Prof Josua Meyer, University of Pretoria, South Africa
Room: Regency Hall 1-4Mon, 7 14 8:40 - 9:20
Keynote Paper 1
Room: Regency Hall 1-4
Chairs: Rick de Lange (Eindhoven University of Technology, The Netherlands), Bale Reddy (University of Ontario Institute of Technology, Canada)
- 8:40 Bubble Deformation in Nucleate Boiling
Mon, 7 14 9:20 - 10:40
Keynote Papers 2 and 3
Room: Regency Hall 1-4
Chairs: Christos N. Markides (Imperial College London, United Kingdom (Great Britain)), Martin Oberlack (Technical University Darmstadt, Germany)
- 9:20 On Conservation of Scattered Energy and Angle in Radiative Transfer Computations
- 10:00 Multiphase Flow and Heat Transfer on Micro/Nanostructured Surfaces
Mon, 7 14 10:40 - 11:00
Tea/Coffee
Room: Regency Hallway
Mon, 7 14 10:40 - 11:40
Posters 1
Room: Hallway
Chairs: Luca Ferrari (University of Applied Sciences of the Southern Switzerland, Switzerland), Petra Dancova (Technical University of Liberec & Faculty of Mechanical Engineering, Czech Republic), Ezeddine Sediki (University of Tunis El Manar & Faculty of Science of Tunis, Tunisia)
- Review of Thermodynamic and Transport Properties of 1-Butanol as Renewable Component of New Biofuels
- Temperature Variation on the Heated Base of a Solid Substrate Cooled with Different Types of Heat Sink
- Magnetohydrodynamics Stability of Swirling Flows with Heat Transfer in a Cylindrical Container
- Heat Transfer and Temperature Distribution of Laminated Fiber Composite Block Constructed by Using Autoclave Molding and Hot Pressing Process
- Optimization of Model Wind-Tunnel Contraction Using CFD
- Experimental Study to Obtaining Bricks From Tailings Miners Cyanide Process
- Laminar Burning Velocity and Flammability Limits in Biogas: a State of the Art
- Technology Platform ENERBAT - Gas Cogeneration, Solar Heating and Cooling
- The Chaotic Bubble Departures as a Result of Nonlinearity of Gas Compression in the Plenum
- Falling Film Evaporative Heat Transfer on CNT Composite Coatings
Mon, 7 14 11:00 - 13:00
Computational Fluid Dynamics 1
Room: Regency Hall 1-4
Chairs: Philip Donnellan (University College Cork, Ireland), Anthony G Straatman (Western University, Canada)
- 11:00 Laminar Natural Convection Heat Transfer From an Isothermal Vertical Ribbed Plate
- 11:20 Flow Past a Cylinder with Upstream Splitter Plate
- 11:40 Flow and Thermal Characteristics of Airflow Inside Refrigerated Containers
- 12:00 Modelling of Heat Transfer in Human Eye Using Computational Fluid Dynamics Technique
- 12:20 Numerical Simulation of Natural Convection in a Spherical Porous Annulus
- 12:40 Two Hermite Analogs of the Lowest Order Raviart-Thomas Mixed Element for the Convection-Diffusion Equations
Convection Heat Transfer 1
Room: Regency Hall 5
Chair: Fredrik Innings (Tetra Pak Processing Systems, Sweden)
- 11:00 Comparison of Thermal Characteristics Between the Plate-fin and Pin-fin Heat Sinks in Natural Convection
- 11:20 Natural-Convective Heat Transfer in Square Cavity with Viscous Dissipation
- 11:40 A Numerical Study of Laminar and Turbulent Opposing Mixed Convective Flow Over a Vertical Plate with a Uniform Surface Heat Flux
- 12:00 A Numerical Study of Natural Convective Heat Transfer From a Horizontal Isothermal Square Element Imbedded in an Adiabatic Surface with a Parallel Adiabatic Covering Surface
- 12:20 Mixed Convection Flow of Non Newtonian Carreau Fluid: Effect of Viscous Dissipation
- 12:40 Analysis of Heatlines and Entropy Generation During Natural Convection Within Enclosure with Curved Side Walls
Heat Exchangers 1
Room: Regency Hall 6
Chairs: Cees van der Geld (Eindhoven University of Technology, The Netherlands), David Denkenberger (Denkenberger Inventing and Consulting, LLC, USA)
- 11:00 Thermal Influence of Non-uniform Inlet Flow Conditions for a Commercial Plate Fin Heat Exchanger
- 11:20 Influence of Porosity and Pore Density on the Thermal and Hydraulic Performance of Metal Foam Heat Exchangers
- 11:40 Evaluation of the Liquid Channel Influence on Heat Transfer Performance in a Plate-Fin Heat Exchanger by Means of Three-Dimensional CFD Simulations
- 12:00 Performance Screening of a Louvered Fin and Vortex Generator Combination
- 12:20 Applying Taguchi and Grey Relational Methods to a Heat Exchanger with Coil Springs
- 12:40 Experimental Studies on Perforated Plate Matrix Heat Exchanger Surfaces with Different Plate Thickness and Spacer Thickness Using Modified Maximum Slope Method
Numerical Simulations 1
Room: Regency Hall 7
Chairs: Drazen Fabris (Santa Clara University, USA), Chun-lin Huang (National Tsing Hua University, Taiwan)
- 11:00 Lattice Boltzmann Simulation of a Storage Tank with an Immersed Tube Bundle Heat Exchanger
- 11:20 An Inverse Approach to Heat Transfer Coefficient Prediction Considering the Effect of Moving Heating Source in Machining Process
- 11:40 A Parametric Study and Analysis of Conversion Efficiency of an Earthen Charcoal Making Kiln Using a Numerical Method
- 12:00 Finite Element Solution of Navier-Stokes Equations Using Krylov Subspace Methods
- 12:20 Numerical Modeling of the Transient Temperature Rise During Ball-on-Disk Scuffing Tests
- 12:40 Large Eddy Simulation of Near-Nozzle Shock Structure and Mixing Characteristics of Hydrogen Jets for Direct-Injection Spark-Ignition Engines
Multiphase Flows 1
Room: Regency Hall 8
Chairs: Afshin Goharzadeh (The Petroleum Institute, United Arab Emirates), Oscar M H Rodriguez (University of São Paulo & EESC - USP, Brazil)
- 11:00 The Combined Effect of Irregular Shape Particles and Fluid Rheology on Settling Velocity Measurement
- 11:20 Numerical Investigation of an Oscillating Gas Bubble in an Ultrasonic Field
- 11:40 Interaction of a Spherical Particle with a Confined Liquid Film
- 12:00 Optimization Study on the Contoured Shock Tube for Needle-free Drug Delivery
- 12:20 Computational Study of Droplets Rising Using Lattice Boltzmann Method
- 12:40 CFD Modeling of Chemical Looping Combustion in Fuel Reactor with Gaseous Fuel
Mon, 7 14 13:00 - 13:40
Lunch
Room: La Coquina / Alcove / Hemingways
Mon, 7 14 13:40 - 15:40
Energy Conversion 1
Room: Regency Hall 1-4
Chairs: Mosfequr Rahman (Georgia Southern University, USA), Mile Vujicic (Process & Technology Development at Heatric & Meggitt, United Kingdom (Great Britain))
- 13:40 Process Selection for Natural Resource Utilization
- 14:00 On the Thermodynamics of Angular Propulsion
- 14:20 Multi-objective Optimization of a Low-Temperature Transcritical Organic Rankine Cycle for Waste Heat Recovery
- 14:40 A Study on the Autoignition Characteristics of DME-LPG Dual Fuel in HCCI Engine
- 15:00 Temperature Distribution Profiles Inside Biomass Under Dielectric Breakdown Conditions
- 15:20 Thermodynamic Modelling and Analysis of Low Temperature Kalina Cycle System for Geothermal Sources of India
Energy Storage 1
Room: Regency Hall 5
Chairs: Philip Donnellan (University College Cork, Ireland), Alissar Yehya (Universié d'Artois & LGCgE Laboratory, France)
- 13:40 Operating Logic of Thermal Energy Storage Systems
- 14:00 Improvement the Thermal Performance of Myristic Acid
- 14:20 Heat Transfer Enhancement in a Latent Heat Storage Exchanger with Paraffin/graphite Foam
- 14:40 Evaluation of Thermal Performance of Bio-based Phase Change Materials Composites Using Carbon Nanomaterials
- 15:00 A Study on Evaluation of Effective Thermal Conductivity for Spherical Capsules
- 15:20 Desalination Augmented by Energy Storage
Heat Transfer Enhancement 1
Room: Regency Hall 6
Chair: Bassam Hussein Salman (Limkokwing University of Creative Technology, Malaysia)
- 13:40 Heat Transfer Characteristics of Jet Impingement Onto a Heated Disc Bounded by a Cylindrical Wall
- 14:00 Numerical Analysis of Heat Transfer Increase in a Tube with Alternate Successive Gradual Wall Deformations
- 14:20 Application of the Method of Fundamental Solutions and Radial Basis Functions for Laminar Flow and Heat Transfer in Internally Corrugated Tubes
- 14:40 Experimental Analysis of the Performance of Fractal Stirrers for Impinging Jets Heat Transfer Enhancement
- 15:00 Convective Heat Transfer in Cellular Ceramic: a 3D Numerical Solution
- 15:20 Analysis on Effect of Shapes for Microwave-Assisted Food Processing of 2D Samples
Solar Energy 1
Room: Regency Hall 7
Chairs: Christos N. Markides (Imperial College London, United Kingdom (Great Britain)), Yan Su (University of Macau, Macao)
- 13:40 Development of a Heating Device Using CPV and Heat Pipe
- 14:00 Optimisation of an Open Rectangular Cavity Receiver and Recuperator Used in a Small-scale Solar Thermal Brayton Cycle with Thermal Losses
- 14:20 Experimental Determination of Convection Heat Transfer Coefficient for Eggplant, Zucchini and Potato Using a Solar Cooker Box-Type
- 14:40 Effect of Covering by Black Polythene Sheet and Coal Powder on Nearby Surfaces of Sand Bed Solar Still: Studying Heat and Mass Transfer
- 15:00 Performance Model of Shams1 Solar Power Plant
- 15:20 Numerical Investigation of Conjugate Free Convection with Surface Radiation From a Left Vertical Wall of Closed/Open Cavities with Uniform Volumetric Heat Generating Source
Mon, 7 14 13:40 - 15:20
Air-Conditioning and Refrigeration
Room: Regency Hall 8
Chairs: L. Berrin Erbay (Eskisehir Osmangazi University, Turkey), David Sykes (Mainstream Engineering Corporation, USA)
- 13:40 Numerical Study and Experimental Validation of the Water Films and the Detachment of Drops on Drift Eliminators
- 14:00 Experimental Investigation of a Double-bed Adsorption Cooling System for Application in Green Buildings
- 14:20 Study of Heat and Mass Recovery Process on the Performance of Adsorption Cooling Systems
- 14:40 Experimental Evaluation of Refrigerants R290, R32 and R410A in a Refrigeration System Originally Designed for R22
- 15:00 Application of PCM Embedded in Floor Panel for Thermal Management of the Lightweight Envelope of Buildings
Mon, 7 14 15:00 - 16:00
Posters 2
Room: Hallway
Chairs: Kibum Kim (Chungbuk National University, Korea (South)), Laila Guessous (Oakland University, USA), Aloísio Schmid (Federal University of Parana, Brazil)
- The Influence of the Flow Turbulence on the Flow Structure Behind a Sphere
- Transient Performance Investigation of Different Flow-field Designs of Automotive Polymer Electrolyte Membrane Fuel Cell (PEMFC) Using Computational Fluid Dynamics (CFD)
- Experimental Investigation of Heat Transfer From a Heated Wall with an Impinging Synthetic Jet
- Multi-Parameter Optimization of a Plane Fin Heat Sink with Elliptic Shaped Surface Scales
- Characterization of Flow-Pattern and Heat Transfer of Micro Flat Heat Pipes
- Effects of Thermal Boundary Conditions on Natural Convection in a Square Enclosure with an Inner Circular Cylinder Differentially Heated From Bottom Wall
- The Increase of Thermoconductivity of Materials in the Field of Centrifugal Accelerations and Forces
- Renewable Oxygenated Additives in Biofuels: High Pressure Densities of Mixtures Dibutyl-ether + Heptane At High Temperature and Pressure
- Simplified Techniques for Low Grade Heat Energy Management - Industrial Application
Mon, 7 14 15:40 - 16:00
Tea/Coffee
Room: Regency Hallway
Mon, 7 14 16:00 - 18:00
Air-conditioning and Thermal Management
Room: Regency Hall 1-4
Chairs: Eduardo Montero (Universidad de Burgos & Escuela Politecnica Superior, Spain), Jeanette Cobian (California State University, Los Angeles, USA)
- 16:00 Numerical Analysis of Heat and Mass Transfer Processes Through the Maisotsenko Cycle
- 16:20 Conceptual Global Optimal Bounds for COP of Cascaded-Flashed R134A Irreversible AC System
- 16:40 Thermodynamic Approach on the Condensation Risk in Built Environment
- 17:00 Analysis of Thermal Mixing Via Bejan's Heatlines During Natural Convection Within Square Cavities with Discrete Heat Sources
- 17:20 Effect of Xenon Gas and Foils on a Multi-Foil Insulation
- 17:40 Optimising the Thermal Performance of Triple Vacuum Glazing with Low-emittance Coatings
Combustion
Room: Regency Hall 5
Chairs: Ocktaeck Lim (University of Ulsan, Korea (South)), Mikhail Liberman (Nordita, KTH Royal Institute of Technology and Stockholm University & Moscow Institute of Physics and Technology, Sweden)
- 16:00 Lower-order Discrete Dynamical System for H2-air Finite-Rate Chemistry in 3D
- 16:20 Thermodynamic Analysis of Diesel Engine Using Producer Gas as Secondary Fuel
- 16:40 Experimental Investigation of the Ignition Process of A Methane Diffusion Impinging Flame
- 17:00 Numerical Study of Effect of Hydrogen Content in Syngas on Flame Structure
- 17:20 Experimental Study of Effect of Angular Orientation on Flame Spread Over Thin Solid Fuels
- 17:40 Effect of Hydrogen Enrichment on Impinging Heat Transfer of LPG-fired Inverse Diffusion Flame
Experimental Methods
Room: Regency Hall 6
Chairs: Henk Huisseune (Ghent University, Belgium), Artur S. Bartosik (Kielce University of Technology, Poland)
- 16:00 Experimental Investigation of High Temperature Thermal Contact Resistance with Interface Material
- 16:20 Investigation Into Using Liquid Crystal Thermography for Measuring Heat Transfer Coefficients and Wall Temperature Profiles At Inlets and Underdeveloped Regions
- 16:40 Experimental Study on Subcooled Nucleate Boiling From a Single Artificial Cavity
- 17:00 Thermophysical Property Measurement At the Micro- To Nano-scale of Conductive Wires - A Comparison of the Electrothermal Technique and the 3 Omega Method
- 17:20 Prevention and Intensification of Chemically Assisted Melt-Water Explosive Interactions
- 17:40 Ultrasonic Measurements of Unsteady Heat Transfer in a Reciprocating Gas Spring
Renewable Energy
Room: Regency Hall 7
Chairs: Sergio Hanriot (Pontifical Catholic University of Minas Gerais, Brazil), Chaxiu Guo (Zhengzhou University, China)
- 16:00 A CFD-Based Design Methodology for Hydraulic Turbines Applied to A Case Study in Turkey
- 16:20 Parametrical and Theoretical Design of a Francis Turbine Runner with the Help of Computational Fluid Dynamics
- 16:40 Influence of Working Fluid on ORC with Low Temperature Geothermal Source - Case Study Geothermal Power Plant „Babina Greda"
- 17:00 Biogas Production From Hyacinth Blends
- 17:20 Evaluating the Effect of Blade Surface Roughness in Megawatt Wind Turbine Performance Using Analytical and Numerical Approaches
- 17:40 Finite Element Modeling of Structural Design Optimization of Various Vertical Axis Wind Turbine Models
Mon, 7 14 16:00 - 17:40
Energy and Environmental Systems
Room: Regency Hall 8
Chairs: Patrick H Oosthuizen (Queen's University, Canada), Torsten Berning (Aalborg University, Denmark)
- 16:00 Extraction of the Inherent Nature of Wind Using Wavelets
- 16:20 Experimental Analysis of Refrigerated-Truck Thermal Behaviour
- 16:40 High Temperature Electrolysis, Brayton Power Cycle and Methanol Production
- 17:00 Examining the Economic Viability of an Absorption Heat Transformer in Energy Intensive Industries
- 17:20 A Novel Concept of AI-EV (Air-conditioner Integrated Electric Vehicle) for the Advanced Smart Community
Tue, 7 15
Tue, 7 15 8:00 - 17:00
Registration
Foyer of Conference Rooms
Room: Foyer AreaTue, 7 15 8:00 - 9:20
Keynote Papers 4 and 5
Room: Regency Hall 1-4
Chairs: Josua P Meyer (University of Pretoria, South Africa), Zhixiong Guo (Rutgers, The State University of New Jersey, USA)
- 8:00 Thermal and Fluid Dynamic Processes Occurring At Liquid Boiling Over Micro-And-Nano Enhanced Surfaces
- 8:40 Distributed Heat Conversion Technologies Based on Organic-Fluid Cycles for a High-Efficiency and Sustainable Energy Future
Tue, 7 15 9:20 - 10:40
Keynote Papers 6 and 7
Room: Regency Hall 1-4
Chairs: Mikhail Liberman (Nordita, KTH Royal Institute of Technology and Stockholm University & Moscow Institute of Physics and Technology, Sweden), Dean Vucinic (Vesalius College (VeCo), Belgium & Vrije Universiteit Brussel (VUB), Croatia)
- 9:20 Jet in Crossflow: Experiments on the Interaction of Flowstructure and Cooling Efficiency
- 10:00 Fundamental Issues in Nanoscale Heat Transfer: From Phonon Coherence in Heat Conduction to Acoustic Based Near-Field Radiation
Tue, 7 15 10:40 - 11:00
Tea/Coffee
Room: Regency Hallway
Tue, 7 15 10:40 - 11:40
Posters 3
Room: Hallway
Chairs: Veera Gnaneswar Gude (Mississippi State University, USA), Farah Obeid (Masdar Institute - Masdar City- UAE, United Arab Emirates), D Srinivasacharya (National Institute of Technology, Warangal, India)
- Reynolds Number Effect on the Transition on a Flat Plate
- Thermal and Thermodynamic Analysis of a Parabolic Trough Receiver At Different Concentration Ratios and Rim Angles
- Identification of Flow Boiling Patterns in Minichannel by Analysis of Pressure Oscillations
- Heat Transfer with Phase Change in a Shell and Tube Latent Heat Storage Unit
- Thermal Efficiency Evaluation of Silica fume/Phase Change Material Composites for Application to Concrete
- Numerical Analysis of Rotating Ramps in a Scramjet Engine
- Effect of Packing Density on Thermal Properties of Granular Activated Carbon Packed Bed by Using of Inverse Heat Conduction Method
- Numerical Study of Heat Transfer Modification in a Particle-Laden Channel Flow Considering Particle-Turbulence Interaction
Tue, 7 15 11:00 - 13:00
Computational Fluid Dynamics 2
Room: Regency Hall 1-4
Chairs: Martin Oberlack (Technical University Darmstadt, Germany), Zhaohui Yao (Tsinghua University, China)
- 11:00 Starting Transient Simulation of a Vacuum Ejector-Diffuser System Under Chevron Effects
- 11:20 Computational Fluid Dynamics Simulation and Turbomachinery Code Validation of a High Pressure Ratio Radial-Inflow Turbine
- 11:40 Numerical Simulation of Mixed Convection Flows in Lid-Driven Square Cavity
- 12:00 The Taylor Vortex and the Driven Cavity Problems by the Stream Function-Vorticity Formulation
- 12:20 Benchmarking and Evaluating the Accuracy of a Lattice Boltzmann BGK Scheme for Multi-fluid Flows
- 12:40 Free Convective MHD Flow Past a Vertical Cone with Variable Heat and Mass Flux
Convection Heat Transfer 2
Room: Regency Hall 5
Chairs: Philip Donnellan (University College Cork, Ireland), Sergio Hanriot (Pontifical Catholic University of Minas Gerais, Brazil)
- 11:00 Comparison Study for Forced Convection Heat Transfer of Supercritical Carbon Dioxide Flowing in a Pipe
- 11:20 Transient Natural Convection Flow Dynamics in a Asymmetrically Heated Vertical Channel
- 11:40 Numerical Simulation of Internal Channel Cooling by Jet Impingement
- 12:00 Mixed Convection Over a Heated Square Cylinder Under Assisted Flow
- 12:20 Heat Transfer Measurement in Aluminium Oxide Nanofluid Using Rectangular Thermosyphon Loop
- 12:40 Second Law Analysis of the Flow of Two Immiscible Couple Stress Fluids in Four Zones
Heat Transfer Enhancement 2
Room: Regency Hall 6
Chairs: Luca Ferrari (University of Applied Sciences of the Southern Switzerland, Switzerland), Anthony G Straatman (Western University, Canada)
- 11:00 Heat Transfer in Horizontal Tubes At Supercritical Pressures for Organic Rankine Cycle Applications
- 11:20 2-D Analytical Study of Employment of Thermal Barrier Coatings to Evaluate the Performance of Actively Cooled Panels for Airbreathing Vehicles
- 11:40 Experimental Study on the Effect of Wire Coil Insert Geometry on the Heat Transfer Enhancement of a Flat-Plate Solar Collector
- 12:00 Heat Transfer Enhancement in Natural Convection Using Water Based Fe3O4 Nanofluid Inside a Square Cavity
- 12:20 Experimental Investigation of Heat Transfer Enhancement in a Microtube Using Nanofluids
- 12:40 Non-Similar Solution for Mixed Convection in a Porous Medium Saturated with Nanofluid
MEMS, Mico and Nano
Room: Regency Hall 7
Chairs: Mosfequr Rahman (Georgia Southern University, USA), Sebastian Volz (CNRS, France)
- 11:00 Microfluidic Coupler for Hybrid Integrated Lab-on-a-chip
- 11:20 Experimental and Numerical Simulation of Single-Phase Flow in a Micro Heat Spreader Applied to the Cold Start of Internal Combustion Engines Fueled with Ethanol
- 11:40 Experimental Investigation of Asphaltene Deposition in a Transparent Mini-Channel
- 12:00 Nanofluid as a Coolant in Automotive Radiators
- 12:20 Static and Dynamic Behavior of Water Droplets on the Heterogeneous Platinum Surface
- 12:40 Contact Line Friction Analysis of Water Droplets on Micro\Nanoscale Rough Structures
Tue, 7 15 11:00 - 12:40
Heat Exchangers 1
Room: Regency Hall 8
Chairs: Jeanette Cobian (California State University, Los Angeles, USA), L. Berrin Erbay (Eskisehir Osmangazi University, Turkey)
- 11:00 On the Mechanism of Accelerated Sedimentation of Fine Fractions in Bidisperse Suspension
- 11:20 Analytical Scaling of DEM Particles for Efficient Packed-Bed Simulations
- 11:40 On the Optimum Metal Particle Disposition in the Propellant Grain
- 12:00 Investigation of a Two-Phase Flow Natural Circulation Loop with Divergent Microchannel Evaporator
- 12:20 Rope Formation for Gas Solid Flow in a 90 Degree Bend with Varying Particle Size Distributions
Tue, 7 15 13:00 - 13:40
Lunch
Room: La Coquina / Alcove / Hemingways
Tue, 7 15 13:40 - 15:40
Computational Fluid Dynamics 3
Room: Regency Hall 1-4
Chairs: Ming Zeng (National University of Defense Technology, China), Nadine Moussa (Ecole Centrale de Paris, France)
- 13:40 2D Dynamic Mesh Model for Deposit Shape Prediction in Boiler Bank of Recovery Boiler with Different Tube Spacing Arrangements
- 14:00 Application of a Phenomenological Model for the Prediction of the Thickness and Position of Paraffin Deposits of Light Crude Oil in Production Pipe
- 14:20 Cold Gas Analysis of a Waste-Gas Incinerator to Enhance Mixing Capabilities Using CFD
- 14:40 Thermal Instability: From Cat's Eyes to Disjoint Multiple Cells Natural Convection Flow in Tall Tilted Cavities
- 15:00 Using an All-Speed Algorithm to Simulate Unsteady Flows Through Mixed Hydro-Pneumatics Systems
- 15:20 An Investigation of Temperature Separation Phenomenon in the Vortex Chamber
Tue, 7 15 13:40 - 14:40
Energy Storage 2
Room: Regency Hall 5
Chairs: Luca Ferrari (University of Applied Sciences of the Southern Switzerland, Switzerland), Wenfeng Hao (Shenyang Institute of Engineering, China)
- 13:40 Dual-Purpose Power-Desalination Plant Augmented by Thermal Energy Storage System
- 14:00 Technical-Economic Evaluation of a Hydroelectric Micro-central Driven by a Solar-powered Water Storage System for Agricultural Applications
- 14:20 Thermal Sciences and Energy Efficiency
Tue, 7 15 13:40 - 15:40
Heat Transfer Enhancement 3
Room: Regency Hall 6
Chairs: Tomasz Bury (Silesian University of Technology, Poland), Surender Ontela (National Institute of Technology, India)
- 13:40 Enhancement of Ray Tracing Method for Radiative Heat Transfer with New Isocell Quasi-Monte Carlo Technique and Application to EUI Space Instrument
- 14:00 Parametric Analysis of the Heat Transfer in Impinging Jets
- 14:20 Numerical Optimisation of Square Pin-Fins for Minimum Thermal Resistance with Non-Uniform Design Dimensions
- 14:40 Effect of Cooling Rate on Improving the Performance of the Catalytic PVC Reactor in Egyptian Petrochemical Company
- 15:00 Experimental and Numerical Investigation on the Impact of Nanoparticles in the Development of Thermosyphon
- 15:20 Experimental Investigation of the Effect of Multiple Synthetic Jets on Heat Transfer and Pressure Loss in Minichannels
Tue, 7 15 13:40 - 15:00
Solar Energy 2
Room: Regency Hall 7
Chairs: Torsten Berning (Aalborg University, Denmark), Zacharie Tamainot-Telto (University of Warwick & School of Engineering, United Kingdom (Great Britain))
- 13:40 A Study of Salt Gradient Solar Pond in the Tropics
- 14:00 Thermal Performance Characteristics of Artificially Roughened and Boosted Solar Air Heaters
- 14:20 Investigating the Effects of Channel Aspect Ratio on Fluid Flow and Heat Transfer in Absorber Plates with Minichannel
- 14:40 Adsorption Properties of Several Materials for Solar Adsorption Cooling System
Tue, 7 15 13:40 - 16:00
Multiphase Flows 3
Room: Regency Hall 8
Chairs: Artur S. Bartosik (Kielce University of Technology, Poland), Philip Donnellan (University College Cork, Ireland)
- 13:40 Two Phase Annular Flow in a Vertically Mounted Venturi Flow Meter
- 14:00 Two-Phase Flow Behaviour in a Smooth Hairpin Tube: Analysis of the Disturbance Using Capacitive Measurements
- 14:20 Flow Pattern and Pressure Drop in Horizontal Viscous Oil-Water Flows
- 14:40 On the Role of Inlet Flow Instabilities on Horizontal Initially Stratified Liquid-Liquid Flow Development
- 15:00 Numerical Modeling of Demister in Multi Stage Flash (MSF) Desalination
- 15:20 Numerical Study of Natural Convection Boiling in a Partially Heated Rayleigh-Bénard Cell
- 15:40 Convective Performance of Encapsulated Phase Change Material Slurries of Water, PAO and Engine Oil in Microchannels
Tue, 7 15 15:00 - 16:00
Posters 4
Room: Hallway
Chairs: Maria Elena Pasquini (CEA Commissariat à l'Energie Atomique - UPMC Université Pierre et Marie Curie, France), J. Prakash (University of Botswana, Botswana), Isam Janajreh (Masdar Institute of Science and Technology, United Arab Emirates)
- A Novel Mathematical Model and Numerical Simulation of Mass and Heat Transfer in Bioleaching Process of Copper Agglomerate
- Numerical Simulation of Hydrodynamics and Heat Exchange in a Multibond Part of the In-line Heat Exchanger
- Modelling of Heating Modes of Rotating Disks Using Induction Heating
- Thermal Characterization Analysis of Heat-Sink Heat Pipes Under Forced Convection
- Differential Scanning Calorimetry of High-Performance Concrete with Burnt Clay Shale Addition
- Dynamic Forces and Acoustic Energy Dissipation in Conical Bubble Luminescence
- Estimation of the Thermal Diffusivity in a Large Electroceramic Body by an Inverse Method
Tue, 7 15 15:40 - 16:00
Tea/Coffee
Room: Regency Hallway
Tue, 7 15 16:00 - 18:00
Heat Pipes
Room: Regency Hall 1-4
Chairs: David Denkenberger (Denkenberger Inventing and Consulting, LLC, USA), Isam Janajreh (Masdar Institute of Science and Technology, United Arab Emirates)
- 16:00 Analysis of Pulsating Heat Pipe with a Dual-Diameter Tube
- 16:20 The Effect of Substrate Conduction on the Thermal Performance of a Flat Plate Pulsating Heat Pipe
- 16:40 Prediction of Two-Phase Thermosyphon Throughput by Self Developed CAE Program
- 17:00 The Efficiency of the Heat Pipe of Known Geometry Using a Number of Refrigerants
- 17:20 Experimental Analysis of Gas to Water Two Phase Closed Thermosyphon Based Heat Exchanger
- 17:40 A Numerical Approach for Estimating the Entropy Generation in Flat Heat Pipes
Conduction, Cryogenics and Drying
Room: Regency Hall 5
Chairs: Tilak T Chandratilleke (Curtin University, Australia), Bengt Sunden (Lund University, Sweden)
- 16:00 Influence of Recombination on the Thermal Conduction in bipolar Semiconductors and Semiconductor structures
- 16:20 Sustainable Energy Source with Time-Varying Temperature
- 16:40 Spreading Resistant in Anisotropic Rectangular Plates with Multiple Heat Sources and Sinks
- 17:00 Thermal and Electrical Study on Ac Light-Emitting Diode with Multiple Quantum Wells Under Various Cooling Rate
- 17:20 Numerical Simulation of Drying Process of an Inkjet Droplet Using Lagrangian FEM
- 17:40 Impact of the Oxide Scale on Spray Cooling Intensity
Applications 1
Room: Regency Hall 6
Chairs: Fiorella C. Alvaro (Pontifical Catholic University of Rio de Janeiro, Brazil), Chun-lin Huang (National Tsing Hua University, Taiwan)
- 16:00 A New Theoretical Thermodynamic Model for the Solubility of Acid Gases in Aqueous Solution of N-Methylidethanolamine
- 16:20 Features of Flow Around the Leading Edge of a Circular Cylinder in Axial Flow
- 16:40 Numerical Study of the Effect of Liquid Sloshing Inside TLD on Suppression of Gust Wind- Induced Vibration in High Rise Buildings
- 17:00 Steady and Transient Conjugate Heat Transfer Modeling of IGBTs Subjected to Liquid Cooling by a Membrane Heat Sink for Rolling Stock Applications
- 17:20 Exergetic and Exergoeconomic Analysis of Selected Gas Turbine Power Plants in Nigeria
- 17:40 The Rheological Behavior of Concentrated Orange Juice
Tue, 7 15 16:00 - 18:20
Numerical Simulations 2
Room: Regency Hall 7
Chairs: Mile Vujicic (Process & Technology Development at Heatric & Meggitt, United Kingdom (Great Britain)), Wenfeng Hao (Shenyang Institute of Engineering, China)
- 16:00 Heat Transfer Modelling of Laser Cladding Process -- Role of Location of Injection of Powder Particles
- 16:20 Convergence of High-order Interpolation Schemes in Shear Layer Modelling
- 16:40 A Numerical Study of the Effect of a Below Window Hot Air Vent on the Convective Heat Transfer Rate From A Cold Window Covered by a Top-Down, Bottom-Up Plane Blind System
- 17:00 Simulation of Direct Contact Condensation of Steam Jets Submerged in Subcooled Water by Means of a One-Dimensional Two-Fluid Model
- 17:20 Inverse VoF Meshless Method for Efficient Non-Destructive Thermographic Evaluation
- 17:40 Numerical Simulation of Liquid Metal Infiltration and Solidification Inside a Capillary Tube
- 18:00 MHD Mixed Convection in Micropolar Fluid with Cross Diffusion Effects
Tue, 7 15 16:00 - 18:00
Applications 2
Room: Regency Hall 8
Chairs: Jeanette Cobian (California State University, Los Angeles, USA), Yang Zhang (University of Sheffield, United Kingdom (Great Britain))
- 16:00 Turbulent Flow Across a Rotating Cylinder with Surface Roughness
- 16:20 Combined PLIF-IR Thermal Measurements of Wavy Film Flows Undergoing Forced Harmonic Excitation
- 16:40 On the Application of Hot Wires and Pitot-Tubes in Pipe and Channel Flows
- 17:00 Influence of Transient Phenomena in the Discharge Coefficient Through the Intake Valve in an Internal Combustion Engine
- 17:20 Laminar Semi-Porous Channel Electrically Conucting Flow Under Magnetic Field
- 17:40 Experimental Analysis of the Rate of Absorption of Steam Bubbles in Lithium Bromide Solution for Use in an Absorption Heat Transformer
Wed, 7 16
Wed, 7 16 8:00 - 14:00
Registration
Room: Foyer Area
Wed, 7 16 8:00 - 9:20
Keynote Papers 8 and 9
Room: Regency Hall 1-4
Chairs: Huihe Qiu (The Hong Kong University of Science & Technology, Hong Kong), Cees van der Geld (Eindhoven University of Technology, The Netherlands)
- 8:00 Role of Energy and Exergy Analyses in Performance Improvement and Development of Advanced and Sustainable Energy Systems
- 8:40 Study of Unsteady Combustion Processes Controlled by Detailed Chemical Kinetics
Wed, 7 16 9:20 - 10:40
Keynote Papers 10 and 11
Room: Regency Hall 1-4
Chairs: Sebastian Volz (CNRS, France), Ana Moita (IN + - Instituto Superior Técnico, Universidade de Lisboa, Portugal)
- 9:20 Can We Obtain First Principle Results for Turbulence Statistics?
- 10:00 MAAT System Design - Weight Model of Very Large Lighter-Than-Air Vehicle
Wed, 7 16 10:40 - 11:00
Tea/Coffee
Room: Regency Hallway
Wed, 7 16 10:40 - 11:40
Posters 5
Room: Hallway
Chairs: Md. Mahbub Alam (Harbin Institute of Technology Shenzhen Graduate School, China), Isam Janajreh (Masdar Institute of Science and Technology, United Arab Emirates), Alissar Yehya (Universié d'Artois & LGCgE Laboratory, France)
- A Power Generation Study Based on Operating Parameters of the Linear Engine Using a Powerpack
- Dish Stirling cavity/receiver: Thermal Model and Design Optimization
- New Method for the Identification of Two-Phase Flow Patterns in A Minichannel
- Analytical and Numerical Methods for Solving Problems of Heat Conduction for Body with Graded Coating
- Comparisons Between Dynamics of SBSL and Encapsulated Bubble in Spherical Resonator
- Investigations of the Thermal State of the GTE Blades Using a Thermal Vision System for Tests with Thermal Management
- Analytical Thermal and Cost Optimization of Micro-Structured Plate-Fin Heat Sink
Wed, 7 16 11:00 - 13:00
Computational Fluid Dynamics 4
Room: Regency Hall 1-4
Chairs: Talal Maksoud (University of South Wales, United Kingdom (Great Britain)), Mohamed S Hamed (McMaster University & Thermal Processing Laboratory (TPL), Canada)
- 11:00 Numerical Simulation of Mixing and Combustion of Turbulent Opposed-Jet
- 11:20 POD-Accelerated CFD Analysis of Wind Loads on PV Systems
- 11:40 Computational Analysis of Laminar Forced Convection in Rectangular Enclosures of Different Aspect Ratios
- 12:00 Wavy Ribbon Formation During Planar Flow Melt Spinning Process - A 3D CFD Analysis
- 12:20 An Experimental and Numerical Study of the Smoke Ventilation in Atrium Fires Under Dynamic Ventilation Performance
- 12:40 Lagrangian Block Simulation of Buoyancy At Turbulence Interfaces
Wed, 7 16 11:00 - 12:40
Convection Heat Transfer 3
Room: Palm ABC
Chairs: Tommaso Astarita (University of Naples Federico II, Italy), Luca Ferrari (University of Applied Sciences of the Southern Switzerland, Switzerland)
- 11:00 Numerical Optimisation of Forced Convection in a Vascularised Solid with Triangular Channels
- 11:20 Real-Gas Thermodynamic Analysis of the Wave-Rotor Combustion Turbine
- 11:40 Pressure Drop Along a Channel with Modified Short Pin-fins
- 12:00 Two-dimensional Topology Optimization of Fluid Channel Distributions - Pressure Objective
- 12:20 New Correlations for the Average Nusselt Number in Squealer Turbine Blade Tip
Heat Exchangers 3
Room: Palm DEF
Chairs: Fredrik Innings (Tetra Pak Processing Systems, Sweden), Mark Ricklick (Embry-Riddle Aeronautical University, USA)
- 11:00 A Fast Numerical Model to Calculate the Thermal Performance of a Heat Exchanger with Rectangular PCM Storage
- 11:20 Investigation of the Effects of Late Ignition Time on the Domestic Hot Water (DHW) Comfort of a Combi Boiler Type Heating Appliance
- 11:40 Numerically-Based Parametric Study of a Compact Fin-Tube Heat Exchanger
- 12:00 Application of Plate Heat Exchangers to the Development of Portable High-Pressure Humid Gas Generators
- 12:20 An Experimental Investigation on the Effects of Refrigerant Circuiting on Freezer Performance
Thermal Design and Fuel Cells
Room: Ponciana AB
Chairs: Drazen Fabris (Santa Clara University, USA), Bale Reddy (University of Ontario Institute of Technology, Canada)
- 11:00 A Case for Introducing Thermal-Design Optimisation Using Excel Spreadsheet
- 11:20 Alkaline Membrane Fuel Cell (AMFC) Stack Modeling and Simulation
- 11:40 The Effect of Microporous Layers with Microchannels on the Membrane Water Content in a Proton Exchange Membrane Fuel Cell - A Modeling Study
- 12:00 An Integrated Analytical Approach for System-level Transient Modeling of Passive Cooling Systems
- 12:20 Control Strategy of Air Comrpessor Under Variable Operating Pressure of Automotive Cells
Wed, 7 16 11:00 - 13:00
Heat Exchangers 1
Room: Ponciana CD
Chairs: Zacharie Tamainot-Telto (University of Warwick & School of Engineering, United Kingdom (Great Britain)), Wenfeng Hao (Shenyang Institute of Engineering, China)
- 11:00 Selection of Prospective Working Fluid Candidates for Subcritical ORC Evaporators
- 11:20 Experimental Study of the Heat Transfer in a Falling Film Evaporator: Influence of the Co-Flowing Vapor
- 11:40 Internal Flow Patterns of an Evaporating Multicomponent Droplet on a Flat Surface
- 12:00 Numerical Simulation of Primary Atomization with Large Eddy Simulation Method
- 12:20 Influences of Interfacial Phenomena on the Fluid Dynamics and Mass Transfer of Single Droplets in Micellar liquid/liquid Systems
- 12:40 Study of Dynamics of Drying Processes in Fe2O3 and SiO2 Nanocolloid Droplets
Wed, 7 16 13:00 - 13:40
Lunch
Room: La Coquina / Alcove / Hemingways
Wed, 7 16 13:40 - 15:00
Energy Conversion 2
Room: Regency Hall 1-4
Chairs: Ocktaeck Lim (University of Ulsan, Korea (South)), Sarada Kuravi (Florida Institute of Technology & Energy-Efficient Thermal Systems Laboratory, USA)
- 13:40 Thermal Analysis of Wind Turbine Nacelle of 2.5 MW Turbine At Winter Conditions
- 14:00 Exergoeconomic Analysis of a Novel Small-Scale CHP System for Rural Electrification in Uganda
- 14:20 A Comparison Between the Novel Absorption Refrigeration Cycle and the Conventional Ammonia-Water Absorption Refrigeration Cycle
- 14:40 Comparative Analysis of a DI-Diesel Engine In-Cylinder Fluid Flow Applying PIV Measurements and CFD Simulation
Wed, 7 16 13:40 - 15:20
Numerical Simulation 2
Room: Palm ABC
Chairs: Nadine Moussa (Ecole Centrale de Paris, France), Romuald Mosdorf (Bialystok University of Technology, Poland)
- 13:40 Tri-thermal Device Sizing for Thermophoresis Deposition Measurements of Nanoparticle Soot Aggregates
- 14:00 On the Coupling of a Zonal Model with a BES Model for Predicting Vertical Temperature Distribution
- 14:20 Lattice Monte Carlo Simulation of Thermal Conductivity in Composite Materials
- 14:40 A Locally-Integrated Meshless (LIM) Method Applied to Advection-Diffusion Problems
- 15:00 Numerical Simulation of GE 7001 EA Gas Turbine Using Experimental Data for Compressor Inlet Air Cooling
Wed, 7 16 13:40 - 15:40
Heat Exchangers 4
Room: Palm DEF
Chairs: Huihe Qiu (The Hong Kong University of Science & Technology, Hong Kong), Jun Fukai (Kyushu University, Japan)
- 13:40 Flow Non-uniformity and Heat Transfer in Annular Plate-fin Radiator
- 14:00 Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype
- 14:20 An Experimental Investigation on the Effects of Mini Channel Condenser in a Household Refrigerator-Freezer
- 14:40 Development of Lithium Bromide-Water Absorption Heat Pump System for Simultaneous Production of Heated-up Air and Steam From Waste Heat
- 15:00 A New Technology for Preventing Fouling and Energy Conservation
- 15:20 Thermodynamic Analysis for an Inclined Channel Containing Two Immiscible Couple Stress Fluids Using HAM
Wed, 7 16 13:40 - 15:20
Nuclear Energy
Room: Ponciana AB
Chairs: Chin Pan (National Tsing Hua University, Taiwan), Maria Elena Pasquini (CEA Commissariat à l'Energie Atomique - UPMC Université Pierre et Marie Curie, France)
- 13:40 LIVE Experiments on Melt Pool Heat Transfer in the Reactor Pressure Vessel Lower Head
- 14:00 Performance of a Type IP-2 Packaging System in Accident Conditions of Transport
- 14:20 Water-LBE Flow Similarity Laws and Their Numerical Experiments
- 14:40 Application of a Lumped Parameter Code for Prediction of Hydrogen Distribution Within Containments of Water Reactors
- 15:00 Tsunami Wave Propagation Over an Underwater Obstacle
Wed, 7 16 13:40 - 15:40
Measurement and Radiation
Room: Ponciana CD
Chairs: Vito C Fernicola (INRIM - Istituto Nazionale di Ricerca Metrologica, Italy), Nicola Rossi (University of Applied Sciences of the Southern Switzerland, Switzerland)
- 13:40 The Contact Heat Transfer in Rotary Kilns and the Effect of Material Properties
- 14:00 Benchmark Experimental Data and Radiative Heat Transfer Simulation
- 14:20 Thermoreflectance of Carbon Nanofibers
- 14:40 Analysis of Heat Penetration Into the Solid Bed of Rotary Drums
- 15:00 Transient Radiative Heat Transfer
- 15:20 Biomass Pyrolysis Pilot Plant
Wed, 7 16 15:00 - 16:00
Posters 6
Room: Hallway
Chairs: Tanmay Basak (Indian Institute of Technology Madras, India), Zacharie Tamainot-Telto (University of Warwick & School of Engineering, United Kingdom (Great Britain))
- A Nodal Model for Shape Optimization of Offset Strip Fin Heat Exchanger
- An Experimental Analysis of the Performance of a Short Bar in Free Convection Heat Transfer
- Partially Premixed Flame Reactive Flow Characterization in a Bluff Body Burner
- Analysis of Overall Utilization of Sugarcane Biomass and Waste From the Production of Sugar and Ethanol for Cogeneration in a Brazilian Sugarcane Mill
- Temperature Based Mass Flow Rate Sensor for Algae Photobioreactors
- Capacitive Wire-mesh Sensor Measurements in Oil-water Flow
- On Heat Conduction in a Periodically Stratified Medium with Slant Lamination
- Mixed Convection Flow of Couple Stress Fluid Between Vertical Parallel Plates with Radiation and Chemical Reaction Effects
- Temperature and Heat Stress of Vessels During Cold Perfusion of Kidney
Wed, 7 16 15:40 - 16:00
Tea/Coffee
Room: Regency Hallway
Wed, 7 16 16:00 - 17:40
Aerodynamics
Room: Regency Hall 1-4
Chairs: Kim Heuy Dong (Andong National University, Korea (South)), Tahir Yavuz (Başkent University, Turkey)
- 16:00 The Effect of Leading and Trailing Edge Protuberances on Aerofoil Performance: Theoretical and Experimental Investigation
- 16:20 Wingtips and Multiple Wing Tips Effects on Wing Performance
- 16:40 Numerical Study of the Transient Characteristics of Ablative Hypersonic Flow Fields
- 17:00 Computational Study of a Cargo Van Aerodynamics
- 17:20 Investigation of Forests as Factor of Aerodynamic Protection of Settlements From Dust Storms and Industrial Pollution
Wed, 7 16 16:00 - 18:00
Boiling and Two-Phase Heat Transfer
Room: Palm ABC
Chairs: Enio Bandarra Filho (Federal University of Uberlandia, Brazil), Marcin Lecki (Lodz University of Technology, Poland)
- 16:00 Investigations on Pool Boiling Outside Horizontal Tube Bundles
- 16:20 Bubble Dynamics Under an Impinging Planar Water Jet
- 16:40 An Intrusive Method for Film Thickness Measurement on Smooth Horizontal Tubes for Subcooled Water
- 17:00 Effect of Al2O3 - Water Nano Fluid on Bubble Spacing in Subcooled Flow Boiling in a Horizontal Annulus
- 17:20 Non-Boiling Heat Transfer in Horizontal and Near Horizontal Downward Inclined Gas-Liquid Two Phase Flow
- 17:40 Non-Boiling Heat Transfer in Horizontal and Near Horizontal Upward Inclined Gas-Liquid Two Phase Flow
Turbulence, Stability and Transition
Room: Palm DEF
Chairs: Mazin Abuharaz (Higher Colleges of Technology, United Arab Emirates & Old Dominion University, USA), Afshin Goharzadeh (The Petroleum Institute, United Arab Emirates)
- 16:00 Modulation Equations for Roll Waves of a Liquid Film Down an Inclined Plane as a Power-Law Fluid
- 16:20 A Mechanism of Polymer Induced Drag Reduction in Turbulent Pipe Flow
- 16:40 New low-Reynolds-number K-E Turbulent Model for Natural and Mixed Convection in Enclosed Cavity
- 17:00 Non-Newtonian Rimming Flow: Stability Analysis
- 17:20 Simulation of Heat Transfer to Kaolin Slurry Which Exhibits Enhanced Damping of Turbulence
- 17:40 LES of Incompressible Turbulent Flow Inside a Cubical Cavity Driven by Two Parallel Lids Moving in Opposite Direction - Effect of Reynolds Number
Wed, 7 16 16:00 - 17:40
Porous Media and Membranes
Room: Ponciana AB
Chairs: Emad Alhseinat (The Petroleum Institute, United Arab Emirates), Yan Su (University of Macau, Macao)
- 16:00 Thermal Performance Study of Finned Foam Heat Sinks and the Effect of Painting and Inclination Angle in Natural Convective Heat Transfer
- 16:20 Flow Regimes in Foam-Like Highly Porous Media
- 16:40 Oscillatory Flow of a Conducting Jeffrey Fluid in a Composite Porous Medium Channel
- 17:00 Numerical Simulation of Three-Dimensional Natural Convection in a Cuboid Box Containing Heat Generating Porous Medium
- 17:20 Gas Separation Using Membrane by Enhancing Mixing in Pulsating Flows
Wed, 7 16 16:00 - 18:00
In Memoriam and Other
No presentations: for archival purposes only
Room: Ponciana CD- Biogas as a Fuel Source for Proton-Exchange Membrane Fuel Cell
- Two-Phase Flow Through a Staggered Tube Bundle of a Shell and Tube Heat Exchanger
- The Effects of Uncertainty of Nanolayer Properties on the Heat Transfer Through Nanofluids
- Investigation Into Cavity Flow Natural Convection for Al2O3-water Nanofluids Numerically
- Analytical Study of Flow and Heat Transfer in Cross and Non Cross Flow Jet Plate Solar Air Heater
- Study on Flashover in Small Residential Units with an Open Kitchen by Nonlinear Dynamics
- Assessment of Refrigerant Mixtures Performance with Thermal Glide for Cold Climate Air-Source Heat Pumps
Wed, 7 16 19:00 - 22:00
Conference banquet and awards ceremony
Awards to best papers of each session
Room: Cascades Restaurant