Author Index
A B C D F G H I J K L M N O P R S T U V W Y Z
| Author | Session | Start page | Title |
|---|---|---|---|
| A A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Abdulrahman, Alhadhrami | NAT.5 | Experimental Study of Natural Convective Heat Transfer From an Inclined Isothermal Cylinder with an Exposed Top Surface Mounted on a Flat Adiabatic Base | |
| Agrawal, Neeraj | TPF.2 | Study of Helically Coiled Adiabatic Capillary Tubes for Transcritical CO2 Expansion | |
| Aguilar Franco, Jose Alberto | COM1.2 | Experimental Analysis of a Diesel Cycle Engine Using Gasoline as Fuel: HCCI Technology | |
| Al-Anizi, Salamah | POW.3 | Determination of Industrial Boiler Temperature Profile for Oil and Gas Fuels | |
| Al-Hadhrami, Luai | REN.4 | Analysis of a Multi-Megawatt Grid Connected Wind Farm | |
| Alam, Md. | REN.4 | Analysis of a Multi-Megawatt Grid Connected Wind Farm | |
| KW.2 | Fluid Dynamics Around Twin Cylinders and Interactions | ||
| Alexandrov, Dmitri | HTT1.1 | Effect of a Forced Flow on 3D Dendritic Growth in Binary Systems | |
| HTT1.2 | Morphological Instability of the Sea Ice - Ocean Interface in the Presence of Brine Channels in a Mushy Layer | ||
| Ameel, Bernd | EHT.3 | Numerical Study of the Thermal and Hydraulic Characteristics of a Round Tube Heat Exchanger with Louvered Fins and Delta Winglets | |
| EHT.4 | Parametric Influence of Open-Cell Metal Foam on Thermal and Hydraulic Performance | ||
| POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | ||
| POSM.2 | Pressure Drop and Flow Behaviour of Refrigerant Two Phase Flow in a Smooth Hairpin | ||
| HTT2.14 | Modelling Heat and Moisture Transport in Porous Materials with CFD for Building Applications | ||
| AES.1 | Using Liquid Air as a Way to Store Energy | ||
| Andrzejczyk, Rafal | POST.6 | Comparative Study of Flow Condensation in Conventional and Small Diameter Tubes | |
| Angrisani, Giovanni | POSD.22 | Design and Simulation of a Solar Assisted Desiccant-Based Air Handling Unit | |
| Antonia, Robert | FF1.3 | Effect of Mesh Grids on the Turbulent Mixing Layer of an Axisymmetric Jet | |
| Antos, Pavel | POSM.4 | Hot-wire Anemometry Measurement of Diffusion of Air-Carbon Dioxide Admixture in Flow Over Two-Dimensional Hill | |
| Archakov, Ivan | AES.6 | Superfine Water Cleaning System with "net Zero" Power Consumption as a Renewable Power Source | |
| Arduini, Mariacarla | POST.8 | Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density Insulating Materials | |
| B A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Backer, Lien | HTT3.18 | Evaluation of the Climate for Conservation of the Adoration of the Mystic Lamb in the St. Bavo Cathedral in Ghent | |
| Baranski, Jacek | COM2.4 | Experimental Study and Numerical Simulation of Low Calorific Fuel Combustion At Different Oxygen Content in the Oxidizer | |
| Beangstrom, Sheldon | POW.12 | Steam System Synthesis Using Process Integration Techniques: a Graphical Approach for Multiple Steam Levels | |
| Bello-Ochende, Tunde | REN.1 | Optimum Operating Conditions of the Small-Scale Open and Direct Solar Thermal Brayton Cycle At Various Steady-State Conditions | |
| MEMS.1 | Numerical Study of Effect of Design and Physical Parameters on a PEM Fuel Cell Performance | ||
| HTT3.20 | Geometric Optimisation of Forced Convection in a Vascularised Material | ||
| Benini, Ernesto | FF1.2 | Assessment of Gamma−Theta Transitional Model for Laminar-Turbulent Transition Prediction in Supercritical Airfoils | |
| Benra, Friedrich | PROC.7 | Efficiency Augmentation of Gas Turbine Cycles | |
| Bhattacharyya, Souvik | TPF.2 | Study of Helically Coiled Adiabatic Capillary Tubes for Transcritical CO2 Expansion | |
| Bogdan, Zeljko | HTT2.7 | Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split | |
| POW.4 | Analysis of Reheater Size Impact on Power Plant Performance | ||
| Bonacina, Cesare | POST.19 | Experimental Evaluation of Thermal Properties of Autoclaved Aerated Concrete At High Temperature | |
| Bontemps, André | HTT2.8 | Developing New Phase Change Material Components to Improve Energy Savings and Comfort in Buildings | |
| Boodhoo, Kamelia | FF2.8 | Thermographic Analysis of Thin Liquid Films on a Rotating Disc: Approach and Challenges | |
| Braga, Sergio | HXX.1 | Hydrodynamic and Thermal Evaluation of Biofouling Mitigation in Plate Heat Exchangers | |
| COM1.2 | Experimental Analysis of a Diesel Cycle Engine Using Gasoline as Fuel: HCCI Technology | ||
| Bronchart, Filip | HTT2.13 | Thermodynamics of Greenhouse Systems: a New Approach Leading to New Proposals for Sustainable Production | |
| Bu, Shanshan | KT.1 | Forced Convective Heat Transfer in Novel Structured Packed Beds of Particles | |
| C A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Campanale, Manuela | POST.8 | Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density Insulating Materials | |
| POST.19 | Experimental Evaluation of Thermal Properties of Autoclaved Aerated Concrete At High Temperature | ||
| Canière, Hugo | POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | |
| POSM.2 | Pressure Drop and Flow Behaviour of Refrigerant Two Phase Flow in a Smooth Hairpin | ||
| Chair, TC | KW.1 | Heat Rejection in Condensers Close to Critical Point - Desuperheating, Condensation in Superheated Region and Condensation of Two Phase Fluid - | |
| Chana, Kam | COM2.1 | Rise Time Evaluation of the Heat Flux Microsensor (HFM) on a Hot-Air-Gun Test Rig | |
| Chandratilleke, Tilak | FF2.3 | Analysis of Secondary Flow Characteristics and Hydrodynamic Instability in Fluid Flow Through Curved Ducts | |
| Chernoray, Valery | COM1.4 | Experimental and Numerical Investigation of the Cooling Air Flow in an Electric Generator | |
| Chlup, Hynek | FF1.6 | Fluid Structure Interaction in Fully Collapsible Tubes | |
| Churitter, Tosha | EHT.8 | Theoretical Validation of Test Results for the Pressure Drop Values of Circular Pins with a Maximum Length to Diameter Ratio of 3.0 Using Existing Equations and Test Data for Heat Exchanger Application | |
| Cron, Thomas | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| D A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| De Felice, Sergio | FF2.2 | Integral Length Scales in Vegetated Open Channel Flows | |
| De Jaeger, Peter | KM.1 | The Use of Open Cell Metal Foams in Heat Exchangers: Possibilities and Limitations | |
| EHT.4 | Parametric Influence of Open-Cell Metal Foam on Thermal and Hydraulic Performance | ||
| EHT.3 | Numerical Study of the Thermal and Hydraulic Characteristics of a Round Tube Heat Exchanger with Louvered Fins and Delta Winglets | ||
| De Kerpel, Kathleen | POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | |
| POSM.2 | Pressure Drop and Flow Behaviour of Refrigerant Two Phase Flow in a Smooth Hairpin | ||
| POW.11 | Feasibility and Primary Energy Savings of Absorption Chillers for Data Centers, Both Direct Fired and in Trigeneration | ||
| HTT3.18 | Evaluation of the Climate for Conservation of the Adoration of the Mystic Lamb in the St. Bavo Cathedral in Ghent | ||
| De Paepe, Michel | KM.1 | The Use of Open Cell Metal Foams in Heat Exchangers: Possibilities and Limitations | |
| EHT.4 | Parametric Influence of Open-Cell Metal Foam on Thermal and Hydraulic Performance | ||
| EHT.3 | Numerical Study of the Thermal and Hydraulic Characteristics of a Round Tube Heat Exchanger with Louvered Fins and Delta Winglets | ||
| POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | ||
| POSM.2 | Pressure Drop and Flow Behaviour of Refrigerant Two Phase Flow in a Smooth Hairpin | ||
| COM2.1 | Rise Time Evaluation of the Heat Flux Microsensor (HFM) on a Hot-Air-Gun Test Rig | ||
| HTT2.13 | Thermodynamics of Greenhouse Systems: a New Approach Leading to New Proposals for Sustainable Production | ||
| HTT2.14 | Modelling Heat and Moisture Transport in Porous Materials with CFD for Building Applications | ||
| AES.1 | Using Liquid Air as a Way to Store Energy | ||
| MEMS.5 | Heat and Water Management | ||
| POW.5 | Organic Rankine Cycle as Efficient Alternative to Steam Cycle for Small Scale Power Generation | ||
| POW.11 | Feasibility and Primary Energy Savings of Absorption Chillers for Data Centers, Both Direct Fired and in Trigeneration | ||
| HTT3.18 | Evaluation of the Climate for Conservation of the Adoration of the Mystic Lamb in the St. Bavo Cathedral in Ghent | ||
| Deans, Joe | NAT.6 | Laminar Free Convection Up a Vertical Porous Plate with Suction | |
| Decossin, Stéphane | PROC.5 | Characterization of Heat Fluxes During Water Spray Cooling of Thick Rotating Plates | |
| Deganello, Marta | POST.19 | Experimental Evaluation of Thermal Properties of Autoclaved Aerated Concrete At High Temperature | |
| Dell'Orfano, Federico | FF2.2 | Integral Length Scales in Vegetated Open Channel Flows | |
| Demeyer, Peter | HTT2.13 | Thermodynamics of Greenhouse Systems: a New Approach Leading to New Proposals for Sustainable Production | |
| Demuynck, Joachim | COM2.1 | Rise Time Evaluation of the Heat Flux Microsensor (HFM) on a Hot-Air-Gun Test Rig | |
| COM2.2 | Achievements and State of the Art of Hydrogen Fuelled IC Engines After Twenty Years of Research At Ghent University | ||
| Dev, Satyanarayan | AES.3 | Finite Element Modelling and Experimental Validation of Rapid Pyrolysis of Lignocellulosic Biomass | |
| Dewulf, Jo | HTT2.13 | Thermodynamics of Greenhouse Systems: a New Approach Leading to New Proposals for Sustainable Production | |
| Djenidi, Lyazid | FF1.3 | Effect of Mesh Grids on the Turbulent Mixing Layer of an Axisymmetric Jet | |
| Dohmen, Hans Josef | PROC.7 | Efficiency Augmentation of Gas Turbine Cycles | |
| Du, Xiaoze | HXX.2 | Numerical Investigation of Flow Fields of Air-Cooled Condenser Cell Including Fan Blade Passages | |
| POW.1 | Effect of the Flow Leading Slats Obliquity on the Thermal Performance of Air-Cooled Condensers in a Power Plant | ||
| Dutta, Baishali | AES.3 | Finite Element Modelling and Experimental Validation of Rapid Pyrolysis of Lignocellulosic Biomass | |
| F A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Ferreira, Ricardo | POSM.5 | Experimental Evaluation of Gas Turbine Emissions Fueled with Biodiesel and Biodiesel-Diesel Blend | |
| Filip, Petr | MEMS.3 | Electrospinning of PVB Solutions - Influence of Electrorheological Behaviour | |
| Fodemski, Tadeusz | EHT.6 | Corrugated Channels Heat Transfer Efficiency Analysis Based on Velocity Fields Resulting From Computer Simulation and PIV Measurements | |
| Frota, M. N. | HXX.1 | Hydrodynamic and Thermal Evaluation of Biofouling Mitigation in Plate Heat Exchangers | |
| Fu, Ben-Ran | TPF.4 | Critical Heat Flux on Flow Boiling of Ethanol-water Mixtures in a Diverging Microchannel with Artificial Cavities | |
| G A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Galenko, Peter | HTT1.1 | Effect of a Forced Flow on 3D Dendritic Growth in Binary Systems | |
| Gariépy, Yvan | AES.3 | Finite Element Modelling and Experimental Validation of Rapid Pyrolysis of Lignocellulosic Biomass | |
| Gaus-Liu, Xiaoyang | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| Gheorghiu, Victor | COM1.1 | Ultra-Downsizing of Internal Combustion Engines | |
| Ghiasy, Dena | FF2.8 | Thermographic Analysis of Thin Liquid Films on a Rotating Disc: Approach and Challenges | |
| Gliński, Michal | POST.5 | Flow Boiling of Ethanol in Small Diameter Tubes | |
| Gololo, Khunedi | AES.2 | Synthesis and Optimization of Cooling Water Systems with Multiple Cooling Towers | |
| Gorecki, Grzegorz | EHT.6 | Corrugated Channels Heat Transfer Efficiency Analysis Based on Velocity Fields Resulting From Computer Simulation and PIV Measurements | |
| Grau, Francesc | NAT.2 | Turbulent Dispersion of Particles in a Differentially Heated Vertical Channel | |
| Gualtieri, Paola | FF2.2 | Integral Length Scales in Vegetated Open Channel Flows | |
| Gubba, Sreenivasa | COM2.3 | Experience with the Large Eddy Simulation (LES) Technique for the Modelling of Premixed and Non-Premixed Combustion | |
| Guerra, Danielle | POSM.5 | Experimental Evaluation of Gas Turbine Emissions Fueled with Biodiesel and Biodiesel-Diesel Blend | |
| Gui, Keting | POW.2 | Effects of Magnetic Fields on the Improving Mass Transfer in Flue Gas Desulfurization with a Fluidized Bed | |
| Gusev, Sergei | POW.5 | Organic Rankine Cycle as Efficient Alternative to Steam Cycle for Small Scale Power Generation | |
| H A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Hallquist, Melissa | HTT3.21 | Heat Transfer Coefficients for Laminar to Turbulent Flow in Tubes At Constant Heat Flux | |
| Hamed, Mohamed | TPF.5 | Experimental Investigation of Re-Wetting of Hot Horizontal Tubes | |
| MEMS.4 | Heat Transfer Coefficient and Viscosity of Alumina-water Nanofluids | ||
| Hatakeyama, Tomoyuki | FF2.7 | Measurements for Flow Resistance Coefficient Values of Perforated Plates in Natural Air Convection Flows | |
| Hemza, Jan | FF1.6 | Fluid Structure Interaction in Fully Collapsible Tubes | |
| Hong, Sung-Deok | AES.4 | The VHTR Simulated Gas Loops for Developing the Scale-Downed High-Temperature Components | |
| POSW.14 | Bundle and Annulus CHF Correlations Applicable for Near Critical Pressure Region | ||
| Hübner, Dirk | HTT3.17 | Experimental Analysis and Numeric Simulation of Steady State Flow Forces on Valves of Mechatronic Pressure Regulators for Natural Gas Powered Combustion Engines | |
| Hui, Zhang | HXX.2 | Numerical Investigation of Flow Fields of Air-Cooled Condenser Cell Including Fan Blade Passages | |
| Huisseune, Henk | KM.1 | The Use of Open Cell Metal Foams in Heat Exchangers: Possibilities and Limitations | |
| EHT.4 | Parametric Influence of Open-Cell Metal Foam on Thermal and Hydraulic Performance | ||
| EHT.3 | Numerical Study of the Thermal and Hydraulic Characteristics of a Round Tube Heat Exchanger with Louvered Fins and Delta Winglets | ||
| POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | ||
| I A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Ibrahim, Salah | COM2.3 | Experience with the Large Eddy Simulation (LES) Technique for the Modelling of Premixed and Non-Premixed Combustion | |
| Ihnatowicz, Eugeniusz | TPF.3 | Model of Heat Transfer in the Stagnation Point of Rapidly Evaporating Microjet | |
| HXX.3 | A Microjet Based Recuperator | ||
| Ishizuka, Masaru | FF2.7 | Measurements for Flow Resistance Coefficient Values of Perforated Plates in Natural Air Convection Flows | |
| Isola, Dario | FF2.9 | Numerical Simulation of Unsteady Flows with Strong Shocks Using Adaptive Unstructured Meshes | |
| J A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Jacobi, Anthony | HXX.5 | Experimental Study on Condensation, Frost Formation and Condensate Retention on Microgrooved and Plain Brass Surfaces Under Natural Convection Condition | |
| HXX.4 | Comparison of Frosting, Defrosting and Condensate Retention Characteristics of Vertical Parallel Microgrooved and Plain Brass Surfaces in Forced Convection Condition | ||
| Janssen, Griet | MEMS.5 | Heat and Water Management | |
| Janssens, Arnold | HTT2.14 | Modelling Heat and Moisture Transport in Porous Materials with CFD for Building Applications | |
| HTT3.18 | Evaluation of the Climate for Conservation of the Adoration of the Mystic Lamb in the St. Bavo Cathedral in Ghent | ||
| Jasinski, Piotr | EHT.6 | Corrugated Channels Heat Transfer Efficiency Analysis Based on Velocity Fields Resulting From Computer Simulation and PIV Measurements | |
| Jecl, Renata | FF2.4 | Double-Diffusive Natural Convection Within a 3D Porous Enclosure, Using the Boundary Element Method | |
| Jegla, Zdeněk | HXX.7 | Aspects of Fouling in Case of Heat Exchangers with Polluted Gas | |
| Jewartowski, Marcin | EHT.2 | Heat Transfer Enhancement, Flow Visualization and Friction | |
| COM2.4 | Experimental Study and Numerical Simulation of Low Calorific Fuel Combustion At Different Oxygen Content in the Oxidizer | ||
| Jonáš, Pavel | POSM.4 | Hot-wire Anemometry Measurement of Diffusion of Air-Carbon Dioxide Admixture in Flow Over Two-Dimensional Hill | |
| Jugroot, Manish | POSM.3 | Gas Heating in Plasma Microcavities: Surface Effects | |
| Jurkovic, Miljenko | HTT2.7 | Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split | |
| K A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Kalendar, Abdulrahim | NAT.5 | Experimental Study of Natural Convective Heat Transfer From an Inclined Isothermal Cylinder with an Exposed Top Surface Mounted on a Flat Adiabatic Base | |
| Kaliatka, Algirdas | PROC.1 | Analysis of Processes in Spent Fuel Pools in Case of Loss of Heat Removal Due to Water Leakage | |
| Kamiyo, Ola | POSD.21 | Thermo-economic Analysis of Porous Building Materials with Admixtures | |
| Khan, M. Masud | AES.5 | Assessment of Energy Recovery From Carbonation Process Using Mass and Energy Balance | |
| POSW.17 | Post Combustion Carbon Capture and Storage in Existing Coal Power Plant: Importance and Recent Development | ||
| Kilkovský, Bohuslav | HXX.7 | Aspects of Fouling in Case of Heat Exchangers with Polluted Gas | |
| Kim, Woo-Seung | HTT3.22 | Numerical Study on CO2 Absorption Efficiency by Using Aqueous Monoethanolamine Solution in CO2 Absorber Column | |
| Klein, Christian | HTT3.17 | Experimental Analysis and Numeric Simulation of Steady State Flow Forces on Valves of Mechatronic Pressure Regulators for Natural Gas Powered Combustion Engines | |
| Kolar, Vaclav | FF2.5 | Detection Problems of Vortical Structures | |
| Konakov, Vladimir | AES.6 | Superfine Water Cleaning System with "net Zero" Power Consumption as a Renewable Power Source | |
| Korobeinikov, Andrei | PROC.6 | Industrial Heat Utilisation Through Water Management | |
| Kramer, Janja | FF2.4 | Double-Diffusive Natural Convection Within a 3D Porous Enclosure, Using the Boundary Element Method | |
| Krasny, Boris | AES.6 | Superfine Water Cleaning System with "net Zero" Power Consumption as a Renewable Power Source | |
| Kruger, Sunita | NAT.7 | The Effect of Bench Arrangements on the Indoor Climate of Naturally Ventilated Greenhouses | |
| Kumar, M | HTT2.12 | Influence of Dissipative Entry Temperature on Laminar Heat Transfer in Thermally Developing Region of a Circular Pipe with Viscous Dissipation | |
| Kumar, Subodh | REN.2 | Influence of Air Flow Circulation and Absorbed Thermal Energy on Convective Heat Transfer During Operation of Mixed-Mode Solar Dryer | |
| L A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Lacava, Pedro | POSM.5 | Experimental Evaluation of Gas Turbine Emissions Fueled with Biodiesel and Biodiesel-Diesel Blend | |
| Larsson, Sofia | FF2.6 | Secondary Flow in Semi-Circular Ducts | |
| Laurinavicius, Darius | POW.7 | Thermal Characteristics of Container for On-site Irradiated Nuclear Fuel Transportation | |
| Le Roux, Willem | REN.1 | Optimum Operating Conditions of the Small-Scale Open and Direct Solar Thermal Brayton Cycle At Various Steady-State Conditions | |
| Lee, Jung-Gil | HTT3.22 | Numerical Study on CO2 Absorption Efficiency by Using Aqueous Monoethanolamine Solution in CO2 Absorber Column | |
| Lindmark, Elianne | FF2.6 | Secondary Flow in Semi-Circular Ducts | |
| Lips, Stephane | TPF.1 | Experimental Study of Convective Condensation of R134a in an Inclined Tube | |
| Lu, Guodong | AES.7 | Development & Research of Double Loop Thermosyphon Air-Air Cooler for Wind Power Generator | |
| Lu, Tao | POSW.13 | Large-Eddy Simulations of Mixing Hot and Cold Fluids in Tee Junctions with/without Sintered Porous Medium for Various Temperature Differences | |
| Lundström, Staffan | FF2.6 | Secondary Flow in Semi-Circular Ducts | |
| M A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Majozi, Thokozani | PROC.3 | Optimum Heat Storage Design for Heat Integrated Multipurpose Batch Plants | |
| PROC.6 | Industrial Heat Utilisation Through Water Management | ||
| AES.2 | Synthesis and Optimization of Cooling Water Systems with Multiple Cooling Towers | ||
| POW.12 | Steam System Synthesis Using Process Integration Techniques: a Graphical Approach for Multiple Steam Levels | ||
| Malalasekera, Weeratunge | COM2.3 | Experience with the Large Eddy Simulation (LES) Technique for the Modelling of Premixed and Non-Premixed Combustion | |
| Mallinson, Gordon | KM.3 | Visualisation Strategies for Computational Thermo Fluid Dynamics | |
| NAT.6 | Laminar Free Convection Up a Vertical Porous Plate with Suction | ||
| Malygin, Alexey | HTT1.1 | Effect of a Forced Flow on 3D Dendritic Growth in Binary Systems | |
| HTT1.2 | Morphological Instability of the Sea Ice - Ocean Interface in the Presence of Brine Channels in a Mushy Layer | ||
| Maršík, Frantisek | PROC.4 | Cavitation Processes in Binary Systems - the Effect of a Dissolved Gas on the Nucleation Rate Described by the Classical Nucleation Theory | |
| HTT1.4 | Interaction Between the Jet and Wakes as a Method for Passive Control of Plane Impinging Jets | ||
| FF1.6 | Fluid Structure Interaction in Fully Collapsible Tubes | ||
| Marsudi, Muhammad | PROC.2 | Study of Acoustic Emission During Tensile Test of Mild Steel Plate | |
| Masri, Assaad | COM2.3 | Experience with the Large Eddy Simulation (LES) Technique for the Modelling of Premixed and Non-Premixed Combustion | |
| Mazur, Oton | POSM.4 | Hot-wire Anemometry Measurement of Diffusion of Air-Carbon Dioxide Admixture in Flow Over Two-Dimensional Hill | |
| Meyer, Josua | REN.1 | Optimum Operating Conditions of the Small-Scale Open and Direct Solar Thermal Brayton Cycle At Various Steady-State Conditions | |
| TPF.1 | Experimental Study of Convective Condensation of R134a in an Inclined Tube | ||
| REN.4 | Analysis of a Multi-Megawatt Grid Connected Wind Farm | ||
| MEMS.1 | Numerical Study of Effect of Design and Physical Parameters on a PEM Fuel Cell Performance | ||
| KW.2 | Fluid Dynamics Around Twin Cylinders and Interactions | ||
| HTT3.20 | Geometric Optimisation of Forced Convection in a Vascularised Material | ||
| HTT3.21 | Heat Transfer Coefficients for Laminar to Turbulent Flow in Tubes At Constant Heat Flux | ||
| Miassoedov, Alexei | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| Mikielewicz, Dariusz | EHT.2 | Heat Transfer Enhancement, Flow Visualization and Friction | |
| TPF.3 | Model of Heat Transfer in the Stagnation Point of Rapidly Evaporating Microjet | ||
| HXX.3 | A Microjet Based Recuperator | ||
| POST.5 | Flow Boiling of Ethanol in Small Diameter Tubes | ||
| POST.6 | Comparative Study of Flow Condensation in Conventional and Small Diameter Tubes | ||
| Mikielewicz, Jaroslaw | TPF.3 | Model of Heat Transfer in the Stagnation Point of Rapidly Evaporating Microjet | |
| HXX.3 | A Microjet Based Recuperator | ||
| Militky, Jiri | HTT1.3 | Complex Characterization of Cotton FabricsThermo Physiological Comfort | |
| Milón Guzmán, Juan José | HXX.1 | Hydrodynamic and Thermal Evaluation of Biofouling Mitigation in Plate Heat Exchangers | |
| COM1.2 | Experimental Analysis of a Diesel Cycle Engine Using Gasoline as Fuel: HCCI Technology | ||
| Misra, Ashok | HTT1.6 | Unsteady Incompressible Flow and Heat Transfer of Dusty Non-Ionized Fluid with Charged Suspended Particulate Matter(SPM) Between Two Infinite Parallel Plates Due to the Motion of One of Them | |
| Mooney, Emma | PROC.6 | Industrial Heat Utilisation Through Water Management | |
| Moradnia, Pirooz | COM1.4 | Experimental and Numerical Investigation of the Cooling Air Flow in an Electric Generator | |
| POST.18 | Implementation of a 3D Solver for Electric Arc Welding, Coupling Fluid Mechanics with Electromagnetics | ||
| Moro, Lorenzo | POST.19 | Experimental Evaluation of Thermal Properties of Autoclaved Aerated Concrete At High Temperature | |
| POST.8 | Influence of Surface Emissivity and of Low Emissivity Shields on the Thermal Properties of Low Density Insulating Materials | ||
| Moulden, Trevor | FF1.4 | A Uniqueness Theorem in Fluid Turbulence | |
| Mulder, Grietus | MEMS.5 | Heat and Water Management | |
| Muszyński, Tomasz | TPF.3 | Model of Heat Transfer in the Stagnation Point of Rapidly Evaporating Microjet | |
| N A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Nadim, Nima | FF2.3 | Analysis of Secondary Flow Characteristics and Hydrodynamic Instability in Fluid Flow Through Curved Ducts | |
| Narayanaswamy, Ramesh | FF2.3 | Analysis of Secondary Flow Characteristics and Hydrodynamic Instability in Fluid Flow Through Curved Ducts | |
| Nathan, Graham | FF2.6 | Secondary Flow in Semi-Circular Ducts | |
| Nĕmec, Tomas | PROC.4 | Cavitation Processes in Binary Systems - the Effect of a Dissolved Gas on the Nucleation Rate Described by the Classical Nucleation Theory | |
| Neto, J. R. C. A. | HXX.1 | Hydrodynamic and Thermal Evaluation of Biofouling Mitigation in Plate Heat Exchangers | |
| Nilsson, Håkan | COM1.4 | Experimental and Numerical Investigation of the Cooling Air Flow in an Electric Generator | |
| POST.18 | Implementation of a 3D Solver for Electric Arc Welding, Coupling Fluid Mechanics with Electromagnetics | ||
| No'osi, Gaëlle | PROC.5 | Characterization of Heat Fluxes During Water Spray Cooling of Thick Rotating Plates | |
| Nogueira, Manoel | POSM.5 | Experimental Evaluation of Gas Turbine Emissions Fueled with Biodiesel and Biodiesel-Diesel Blend | |
| Norris, Stuart | KM.3 | Visualisation Strategies for Computational Thermo Fluid Dynamics | |
| NAT.6 | Laminar Free Convection Up a Vertical Porous Plate with Suction | ||
| O A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Obayopo, Surajudeen | MEMS.1 | Numerical Study of Effect of Design and Physical Parameters on a PEM Fuel Cell Performance | |
| Okeke, Edward | POSD.21 | Thermo-economic Analysis of Porous Building Materials with Admixtures | |
| Olakoyejo, Olabode | HTT3.20 | Geometric Optimisation of Forced Convection in a Vascularised Material | |
| Oosthuizen, Patrick | NAT.4 | A Numerical Study of Laminar and Turbulent Natural Convective Flow Through a Vertical Symmetrically Heated Channel | |
| NAT.5 | Experimental Study of Natural Convective Heat Transfer From an Inclined Isothermal Cylinder with an Exposed Top Surface Mounted on a Flat Adiabatic Base | ||
| Ortwig, Harald | HTT3.17 | Experimental Analysis and Numeric Simulation of Steady State Flow Forces on Valves of Mechatronic Pressure Regulators for Natural Gas Powered Combustion Engines | |
| Ozalp, Nesrin | REN.7 | An Overview of Solar Thermal Cracking of Natural Gas: Challenges and Solutions Towards Commercilization | |
| P A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Palagin, Alexander | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| Pallares, Jordi | NAT.2 | Turbulent Dispersion of Particles in a Differentially Heated Vertical Channel | |
| Pan, Chin | TPF.4 | Critical Heat Flux on Flow Boiling of Ethanol-water Mixtures in a Diverging Microchannel with Artificial Cavities | |
| Papatzacos, Paul | POSD.20 | The Helmholtz Free Energy of Pure Substances and Fluid Mixtures | |
| Park, Goon-Cherl | AES.4 | The VHTR Simulated Gas Loops for Developing the Scale-Downed High-Temperature Components | |
| POSW.14 | Bundle and Annulus CHF Correlations Applicable for Near Critical Pressure Region | ||
| Pennel, Christophe | PROC.5 | Characterization of Heat Fluxes During Water Spray Cooling of Thick Rotating Plates | |
| Prakash, J. | HTT1.6 | Unsteady Incompressible Flow and Heat Transfer of Dusty Non-Ionized Fluid with Charged Suspended Particulate Matter(SPM) Between Two Infinite Parallel Plates Due to the Motion of One of Them | |
| Pretorius, Leon | NAT.7 | The Effect of Bench Arrangements on the Indoor Climate of Naturally Ventilated Greenhouses | |
| Pulci Doria, Guelfo | FF2.2 | Integral Length Scales in Vegetated Open Channel Flows | |
| R A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Raghavan, Vijaya | AES.3 | Finite Element Modelling and Experimental Validation of Rapid Pyrolysis of Lignocellulosic Biomass | |
| Rahman, Md. | HXX.4 | Comparison of Frosting, Defrosting and Condensate Retention Characteristics of Vertical Parallel Microgrooved and Plain Brass Surfaces in Forced Convection Condition | |
| HXX.5 | Experimental Study on Condensation, Frost Formation and Condensate Retention on Microgrooved and Plain Brass Surfaces Under Natural Convection Condition | ||
| Raji, Tunde | COM2.5 | Development of an Experimental Model Bubbling Fluidized Bed Combustor for Combustion of Biomass | |
| Ravnik, Jure | FF2.4 | Double-Diffusive Natural Convection Within a 3D Porous Enclosure, Using the Boundary Element Method | |
| Rehman, Shafiqur | REN.4 | Analysis of a Multi-Megawatt Grid Connected Wind Farm | |
| Rimkevicius, Sigitas | POW.7 | Thermal Characteristics of Container for On-site Irradiated Nuclear Fuel Transportation | |
| Roselli, Carlo | POSD.22 | Design and Simulation of a Solar Assisted Desiccant-Based Air Handling Unit | |
| Royon, Laurent | HTT2.8 | Developing New Phase Change Material Components to Improve Energy Savings and Comfort in Buildings | |
| S A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Sadasivuni, Suresh | COM2.3 | Experience with the Large Eddy Simulation (LES) Technique for the Modelling of Premixed and Non-Premixed Combustion | |
| Salako, Tosin | POSD.21 | Thermo-economic Analysis of Porous Building Materials with Admixtures | |
| Sasso, Maurizio | POSD.22 | Design and Simulation of a Solar Assisted Desiccant-Based Air Handling Unit | |
| Schall, Eric | FF2.1 | Comparison of Mesh Adaptation Techniques for High-Speed Compressible Flow Problems the Scramjet Testcase for the Euler Equations | |
| Schmidt-Stiefel, Silke | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| Schnitzler, Jan | PROC.7 | Efficiency Augmentation of Gas Turbine Cycles | |
| Schrevens, Eddie | HTT2.13 | Thermodynamics of Greenhouse Systems: a New Approach Leading to New Proposals for Sustainable Production | |
| Semkov, Krum | PROC.6 | Industrial Heat Utilisation Through Water Management | |
| Shi, Haimin | AES.7 | Development & Research of Double Loop Thermosyphon Air-Air Cooler for Wind Power Generator | |
| Shim, Sungmin | HTT3.22 | Numerical Study on CO2 Absorption Efficiency by Using Aqueous Monoethanolamine Solution in CO2 Absorber Column | |
| Shu, Jian-Jun | FF1.1 | On Micropolar Fluid Flow | |
| Sierens, Roger | COM2.1 | Rise Time Evaluation of the Heat Flux Microsensor (HFM) on a Hot-Air-Gun Test Rig | |
| COM2.2 | Achievements and State of the Art of Hydrogen Fuelled IC Engines After Twenty Years of Research At Ghent University | ||
| Singh, Shailendra | NAT.1 | Numerical Investigation of Flow and Heat Transfer in Closed Cavities Partially Heated From Below | |
| Singh, Shobhana | REN.2 | Influence of Air Flow Circulation and Absorbed Thermal Energy on Convective Heat Transfer During Operation of Mixed-Mode Solar Dryer | |
| Škerget, Leopold | FF2.4 | Double-Diffusive Natural Convection Within a 3D Porous Enclosure, Using the Boundary Element Method | |
| Stamp, Jane | PROC.3 | Optimum Heat Storage Design for Heat Integrated Multipurpose Batch Plants | |
| Stasiek, Adam | EHT.2 | Heat Transfer Enhancement, Flow Visualization and Friction | |
| Stasiek, Jan | EHT.2 | Heat Transfer Enhancement, Flow Visualization and Friction | |
| COM2.4 | Experimental Study and Numerical Simulation of Low Calorific Fuel Combustion At Different Oxygen Content in the Oxidizer | ||
| Stehlík, Petr | HXX.7 | Aspects of Fouling in Case of Heat Exchangers with Polluted Gas | |
| Stellato, Carlo | POSD.22 | Design and Simulation of a Solar Assisted Desiccant-Based Air Handling Unit | |
| Štembera, Vítězslav | FF1.6 | Fluid Structure Interaction in Fully Collapsible Tubes | |
| Sudarev, Anatoly | AES.6 | Superfine Water Cleaning System with "net Zero" Power Consumption as a Renewable Power Source | |
| T A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| T'Joen, Christophe | KM.1 | The Use of Open Cell Metal Foams in Heat Exchangers: Possibilities and Limitations | |
| EHT.4 | Parametric Influence of Open-Cell Metal Foam on Thermal and Hydraulic Performance | ||
| EHT.3 | Numerical Study of the Thermal and Hydraulic Characteristics of a Round Tube Heat Exchanger with Louvered Fins and Delta Winglets | ||
| POSM.1 | Video Based Classification of Two Phase Flows Using Linear Discriminant Analysis and Expectation Maximization Clustering | ||
| Tarasovsky, Vadim | AES.6 | Superfine Water Cleaning System with "net Zero" Power Consumption as a Renewable Power Source | |
| Tesař, Václav | HTT1.4 | Interaction Between the Jet and Wakes as a Method for Passive Control of Plane Impinging Jets | |
| Tham, Ming | FF2.8 | Thermographic Analysis of Thin Liquid Films on a Rotating Disc: Approach and Challenges | |
| Thome, John Richard | KT.2 | Two-Phase Flow Boiling in Microchannels for Cooling of Microelectronics | |
| Ticona, E. M. | HXX.1 | Hydrodynamic and Thermal Evaluation of Biofouling Mitigation in Plate Heat Exchangers | |
| Tonkunas, Aurimas | POW.7 | Thermal Characteristics of Container for On-site Irradiated Nuclear Fuel Transportation | |
| Trávníček, Zdeněk | HTT1.4 | Interaction Between the Jet and Wakes as a Method for Passive Control of Plane Impinging Jets | |
| Tsou, Meng-Shan | TPF.4 | Critical Heat Flux on Flow Boiling of Ethanol-water Mixtures in a Diverging Microchannel with Artificial Cavities | |
| Turek, Vojtěch | HXX.7 | Aspects of Fouling in Case of Heat Exchangers with Polluted Gas | |
| Turkovic, Tin | HTT2.7 | Heating System in the Ancient World: the Example of the Southwestern Balneum in Diocletian's Palace in Split | |
| U A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Uruba, Vaclav | POSM.4 | Hot-wire Anemometry Measurement of Diffusion of Air-Carbon Dioxide Admixture in Flow Over Two-Dimensional Hill | |
| Uspuras, Eugenijus | PROC.1 | Analysis of Processes in Spent Fuel Pools in Case of Loss of Heat Removal Due to Water Leakage | |
| POW.7 | Thermal Characteristics of Container for On-site Irradiated Nuclear Fuel Transportation | ||
| V A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| V, Satyamurty | HTT2.12 | Influence of Dissipative Entry Temperature on Laminar Heat Transfer in Thermally Developing Region of a Circular Pipe with Viscous Dissipation | |
| Van Belleghem, Marnix | HTT2.14 | Modelling Heat and Moisture Transport in Porous Materials with CFD for Building Applications | |
| POW.11 | Feasibility and Primary Energy Savings of Absorption Chillers for Data Centers, Both Direct Fired and in Trigeneration | ||
| Vancoillie, Jeroen | COM2.2 | Achievements and State of the Art of Hydrogen Fuelled IC Engines After Twenty Years of Research At Ghent University | |
| Vankeirsbilck, Ignace | POW.5 | Organic Rankine Cycle as Efficient Alternative to Steam Cycle for Small Scale Power Generation | |
| Vanslambrouck, Bruno | POW.5 | Organic Rankine Cycle as Efficient Alternative to Steam Cycle for Small Scale Power Generation | |
| Vansteenkiste, Wim | POW.11 | Feasibility and Primary Energy Savings of Absorption Chillers for Data Centers, Both Direct Fired and in Trigeneration | |
| Verhaert, Ivan | MEMS.5 | Heat and Water Management | |
| Verhelst, Sebastian | COM2.1 | Rise Time Evaluation of the Heat Flux Microsensor (HFM) on a Hot-Air-Gun Test Rig | |
| COM2.2 | Achievements and State of the Art of Hydrogen Fuelled IC Engines After Twenty Years of Research At Ghent University | ||
| MEMS.5 | Heat and Water Management | ||
| W A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Wajs, Jan | TPF.3 | Model of Heat Transfer in the Stagnation Point of Rapidly Evaporating Microjet | |
| HXX.3 | A Microjet Based Recuperator | ||
| POST.5 | Flow Boiling of Ethanol in Small Diameter Tubes | ||
| Wang, Jin | KT.1 | Forced Convective Heat Transfer in Novel Structured Packed Beds of Particles | |
| Wang, K. S. | POSW.13 | Large-Eddy Simulations of Mixing Hot and Cold Fluids in Tee Junctions with/without Sintered Porous Medium for Various Temperature Differences | |
| Wang, Qiuwang | KT.1 | Forced Convective Heat Transfer in Novel Structured Packed Beds of Particles | |
| Wang, Y. W. | POSW.13 | Large-Eddy Simulations of Mixing Hot and Cold Fluids in Tee Junctions with/without Sintered Porous Medium for Various Temperature Differences | |
| Wen, Dongsheng | KM.2 | Remote Controlled Nanoparticle Heating for Biomedical Applications | |
| Wenz, Thomas | POW.6 | LIVE Experiments on Melt Behavior in the Reactor Pressure Vessel Lower Head | |
| Y A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Yang, Jian | KT.1 | Forced Convective Heat Transfer in Novel Structured Packed Beds of Particles | |
| Yang, Lijun | HXX.2 | Numerical Investigation of Flow Fields of Air-Cooled Condenser Cell Including Fan Blade Passages | |
| POW.1 | Effect of the Flow Leading Slats Obliquity on the Thermal Performance of Air-Cooled Condensers in a Power Plant | ||
| Yang, Yongping | HXX.2 | Numerical Investigation of Flow Fields of Air-Cooled Condenser Cell Including Fan Blade Passages | |
| POW.1 | Effect of the Flow Leading Slats Obliquity on the Thermal Performance of Air-Cooled Condensers in a Power Plant | ||
| Yujin, Yue | HXX.2 | Numerical Investigation of Flow Fields of Air-Cooled Condenser Cell Including Fan Blade Passages | |
| Yurchenko, Nina | FF1.5 | Improvement of Aerodynamic Performance Using Thermal Fields of Localized Plasma Sources | |
| Z A B C D F G H I J K L M N O P R S T U V W Y Z | |||
| Zeng, Min | KT.1 | Forced Convective Heat Transfer in Novel Structured Packed Beds of Particles | |
| Zhelev, Toshko | PROC.6 | Industrial Heat Utilisation Through Water Management | |
| AES.2 | Synthesis and Optimization of Cooling Water Systems with Multiple Cooling Towers | ||
| POW.12 | Steam System Synthesis Using Process Integration Techniques: a Graphical Approach for Multiple Steam Levels | ||
| Zhou, Jianwei | AES.7 | Development & Research of Double Loop Thermosyphon Air-Air Cooler for Wind Power Generator | |
| Zrooga, Abdul-Baset | POST.5 | Flow Boiling of Ethanol in Small Diameter Tubes | |