Author Index
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
- Abánades, Alberto
- Analysis of Application of Liquid Metal Coolants as Heat Transfer Fluid for Concentrated Solar Power Systems
- Abdelhafid, Moummi
- Thermal Energy Storage Using Sand. A Numerical Study for Thermal and Fluidic Performances
- Abdul Husain, Reyad
- Impingement Heat Transfer: Predictions of the Influence of Reduced Crossflow Using Large Gaps
- Abdullah, Rand
- Specifics of Heat Transfer At Supercritical Pressures
- Abelman, Shirley
- MHD Free Convective Slip Flow of a Nanofluid From a Nonlinearly Radiating Heated Upward Facing Horizontal Plate with Zero Mass Flux Boundary Condition
- Abolarin, Sogo
- Heat Transfer in the Transitional Flow Regime Inside Smooth Tubes with Twisted Tape Inserts
- Pressure Drop in the Transitional Flow Regime Inside Smooth Tubes with Twisted Tape Inserts
- Abrosimov, Kirill
- Effect of Inlet Air Temperature and Relative Humidity on Performance of PEM Fuel Cell
- Abu-Nada, Eiyad
- Simulation of Heat Transfer Enhancment in Nanofluids Using Dissipative Particle Dynamics
- Adelaja, Adekunle
- A Condensation Heat Transfer Correlation for Inclined Smooth Tubes
- Adrover, Alessandra
- Dispersion At Low and High Peclet Numbers in Finite-Length Patterned Microchannels
- Optimal Heating Protocols in Finite-Length Flat Microchannels: The Effect of Rarefaction, Streamwise Conduction and Viscous Dissipation
- Agachi, Paul-Serban
- Bioglycerol Reforming for Hydrogen-Based Power Generation: Process Configuration, Thermodynamic Simulation, Process Integration and Performance Assessments
- Aguilar, Guillermo
- Fluorescence Temperature Measurement of Optical Cavitation
- Ahmed, Ahmed
- Bubble Dynamics Under an Impinging Jet
- Ahn, Joon
- Numerical Simulation of Flame Propagation Characteristics From Ruptured Furnace Wall of a Naphtha Reformer
- Ahn, Yuchan
- A Strategy for Production of 1,4-Pentanediol From Cellulose and Hemicellulose of Lignocellulosic Biomass
- Ai, Bangcheng
- Simulation of Self-Pressurization in Cryogenic Propellant Tank
- Aissa, Abidi-saad
- Natural Convection Heat Transfer in a Rib-Roughened AsymmetricallyHeated Channel
- Akbarimoosavi, Seyed Mahdi
- Fluorescence Temperature Measurement of Optical Cavitation
- Al Omari, Salah
- Enhancing Heat Transfer Rate by Interaction of Water - Liquid Metal Interface Surface
- Al-Sulaimi, Bushra
- Thermosolutal Convection in a Darcy Porous Medium with Anisotropic Permeability and Thermal Diffusivity
- Al-Tameemi, Mohammed
- A Combined Organic Rankine Cycle-Heat Pump System for Domestic Hot Water Application
- Ala-Nissilä, Tapio
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Alcántara, Rodrigo
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Algieri, Angelo
- Comparative Investigation on the Performances of Organic Rankine Cycles (ORCs) for the Exploitation of Low Temperature Heat Sources
- Alhusseny, Ahmed
- Numerical Simulation of Film Cooling Effectiveness in a Rotating Blade At High Blowing Ratios
- Performance Improvement of a Counter-Flowing Double-Pipe Heat Exchanger Partially Filled with a Metal Foam and Rotating Coaxially
- Ali, Sirine
- 3D CFD Analysis of Heat Transfer in a Scraped Surface Heat Exchanger for Bingham Fluids
- Alvarado, Salvador
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Alzurfi, Nabeel
- Numerical Simulation of Film Cooling Effectiveness in a Rotating Blade At High Blowing Ratios
- Performance Improvement of a Counter-Flowing Double-Pipe Heat Exchanger Partially Filled with a Metal Foam and Rotating Coaxially
- Amano, Shinya
- Calorimetry of Ground Source Heat Pump Using Direct Expansion Method －Measurement of Flow Rate Using PIV Method－
- Ameel, Bernd
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Comparison of Heat Transfer and Pressure Drop Between Analytical and Computational Approaches: A Preliminary Study for Optimal Heat Exchanger Design
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- On the Numerical Simulation of Fins in Natural Convection
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- Organic Rankine Cycle Part-Load Characterization: Validated Models of an 11 kWe Waste Heat Recovery ORC
- Amini, Amir
- Theoretical Investigation of Heat and Mass Transfer for Hollow Fibre Integrated Evaporative Cooling System
- An, Jae
- An Investigation of Film Wavy Structure in Annular Flow Using Two Simultaneous LIF Approaches
- Andreu, Patricia
- Thermal Properties of a Novel Medium Temperature Thermal Energy Storage Composite Based on Sodium Nitrate as Phase Change Material
- Andrews, Gordon
- Impingement Heat Transfer: Predictions of the Influence of Reduced Crossflow Using Large Gaps
- Aphane, Dominic
- MHD Free Convective Slip Flow of a Nanofluid From a Nonlinearly Radiating Heated Upward Facing Horizontal Plate with Zero Mass Flux Boundary Condition
- Aradag, Selin
- CFD Based Hill Chart Construction and Similarity Study of Prototype and Model Francis Turbines for Experimental Tests
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Arbak, Altay
- High-Frequency Oscillating Water Flow in Highly-Porous Media: Experimental Results for 10-ppi Metal Foam
- Arbeiter, Frederik
- Effects of Rib-Configuration on the Thermal-Hydraulics of One-Sided Heated and Rib-Roughened Cooling Channels
- Argyros, Alexander
- The Impact of Capillary Instability and Furnace Operating Conditions on the Fabrication of Drawn Metamaterials
- Arnas, AO
- Education-Teaching Teachers to Teach--Thermodynamics
- Arya, Farid
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Askari, Omid
- Laminar Burning Speed and Flame Structure of Syngas/Oxygen/Helium and Syngas/Air/EDG Premixed Flame
- Awua, Justin
- Investigation Into Thermal Conductivity of Palm Kernel Fibre Nanofluids with Mixture of Ethylene Glycol/Water as Base Fluid
- Ayachi, Fadhel
- Thermo-Electric Energy Storage Using CO2 Transcritical Cycles and Ground Heat Storage
- Aybar, Hikmet
- Effect of Using Viscosity and Thermal Conductivity Models on Experimental Cavity Flow Natural Convection of CuO-Water Nanofluids
- Ayli, Ulku
- CFD Based Hill Chart Construction and Similarity Study of Prototype and Model Francis Turbines for Experimental Tests
- Azaiez, Jalel
- Linear Stability Analysis of Time-Dependent Immiscible Flow Displacements in Porous Media
- Baccar, Mounir
- 3D CFD Analysis of Heat Transfer in a Scraped Surface Heat Exchanger for Bingham Fluids
- Bağcı, Özer
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Comparison of Heat Transfer and Pressure Drop Between Analytical and Computational Approaches: A Preliminary Study for Optimal Heat Exchanger Design
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- High-Frequency Oscillating Water Flow in Highly-Porous Media: Experimental Results for 10-ppi Metal Foam
- On the Numerical Simulation of Fins in Natural Convection
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- Bahadir, Taner
- Modeling Thermodynamic Analysis and Simulation of Organic Rankine Cycle Using Geothermal Energy as Heat Source
- Baïri, Abderrahmane
- Effects of the Molding Compound's Thermal Conductivity on the Thermal State of the QFN64 Electronic Package Subjected to Natural Convection
- Free Convective Heat Transfer for a Tilted Electronic Assembly Equipped with QFN64 Device
- Bajor, Michał
- Experimental Investigation of Domestic Gas Boiler Fitted with ORC Module
- Bakir, Farid
- Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter Rotating Fans Stage
- Balachandar, Ram
- Numerical Investigation of Internal Flows with Sub-Cooled Nucleate Boiling
- Balemboy, Cecile
- Temperature and Energy Performance of Open Refrigerated Display Cabinets Using Heat Pipes Shelves
- Baloyi, Jeffrey
- Optimum Design of Heat Exchanger for Environmental Control System of an Aircraft Using Entropy Generation Minimization (EGM) Technique
- Wall Heat Flux Influence on the Thermodynamic Optimisation of Irreversibilities of a Circulating Fluidised Bed Combustor
- Banks, Darren
- Fluorescence Temperature Measurement of Optical Cavitation
- Barbier, Dominique
- Low Grade Waste Heat Recovery in an Intercooled Recuperated Closed Cycle Gas Turbine
- Barfuss, Christoph
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Barison, Simona
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Barrioz, Vincent
- Numerical Simulation and Analytical Models for Thin Film CdTe Layers Deposited by an Inline AP-MOCVD Process
- Barron, Ronald
- Numerical Investigation of Internal Flows with Sub-Cooled Nucleate Boiling
- Barton, Geoffrey
- The Impact of Capillary Instability and Furnace Operating Conditions on the Fabrication of Drawn Metamaterials
- Bartosiewicz, Yann
- On the Use of Momentum and Kinetic Energy Tubes for Analyzing Transport Phenomena in a Supersonic Ejector
- Batsioudis, Kerryn
- Thermal Performance and Optimisation of a Granular-bed Heat Recuperator
- Beaumont, Fabien
- A Numerical Study of the Natural Convection Flow in an Asymmetrically Heated Vertical Channel: Effect of Heat Source Position
- Natural Convection Heat Transfer in a Rib-Roughened AsymmetricallyHeated Channel
- Bel Fdhila, Rebei
- CFD Modeling of Real Scale Slab Reheating Furnace
- Belaid, Fairouz
- Rayleigh-Bénard Convection of Cu-Water and CuO-Water Nanofluids in Rectangular Enclosure
- Bello-Ochende, Tunde
- Optimum Design of Heat Exchanger for Environmental Control System of an Aircraft Using Entropy Generation Minimization (EGM) Technique
- Thermal Efficiency and Entropy Generation for a Parabolic Trough Receiver At Different Concentration Ratios
- Wall Heat Flux Influence on the Thermodynamic Optimisation of Irreversibilities of a Circulating Fluidised Bed Combustor
- Ben moussa, Ali
- Effects of a Moving Membrane on the Wake Behavior of a Circular Cylinder
- Ben-Gida, Hadar
- Unsteady Aerodynamic Loads During Flapping Flight of Birds; Case Study: Starling and Sandpiper
- Benedetti, Marta
- Point Thermal Transmittance of Rib Intersections in Concrete Sandwich Wall Panels
- Benra, Friedrich
- Parametric Study of a Novel Groove Design for Dry Gas Seals
- Berdasco, Miguel
- Theoretical and Experimental Study of NH3 Absorption Into Ammonia-Water Solution Using Polymeric Porous Membranes
- Berna, César
- Comparison of Polynomial Chaos Expansion Methods for Uncertainty Quantification in CFD Simulations
- Experimental Characterization of the Entrained Droplet Velocities Into a Submerged Gaseous Jet
- Influence of the Spacer Location and the Direct Heating in the Single and Two Phase Region on the Development of In-Phase Instabilities of BWR
- Spatial and Time Evolution of Non Linear Waves in Falling Liquid Films by the Harmonic Expansion Method with Predictor-Corrector Integration
- Study of Pool Scrubbing Events Under Jet Injection Regime
- Berry, Richard
- Effect of Surface Properties on Shock Wave Reflection
- Beysens, Daniel
- Micro Grooved Surface Improve Dew Collection
- Bhagwat, Swanand
- Effect of Pipe Surface Roughness on Frictional Pressure Drop in Gas-Liquid Two Phase Flows
- Bhowmik, Arka
- Role of Short-Pulse Laser for Detection and Differentiation of Cancer Stages and Benign Lesion Within Human Skin
- Billiet, Marijn
- Two-phase Heat Transfer Measurements of R254fa At High Saturation Temperatures in Horizontal Mini-channels
- Biotteau, Gwenaël
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Biswas, Pranay
- Analytical Solution of 1-D Multiple Layer Dual Phase Lag Heat Conduction Problem with Generalized Time Dependent Boundary Condition
- Blauciak, Krzysztof
- A Concept of Evaporator Aided by Capillary Effect
- Bobbo, Sergio
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Bokisova, Lenka
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- Two-phase Heat Transfer Measurements of R254fa At High Saturation Temperatures in Horizontal Mini-channels
- Bottoni, Maurizio
- Generalized Draining Film Model (DFM) Equation Set to Execute an Exact Numerical Solution
- Boutin, Guillaume
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Brillert, Dieter
- Parametric Study of a Novel Groove Design for Dry Gas Seals
- Broučková, Zuzana
- Visualization and Heat Transfer Study of a Synthetic Jet Impinging on a Circular Cylinder
- Brown, Solomon
- Numerical Simulation of CO2 Flows in Pipes with Phase Transition Across the Triple Point
- Bubnovich, Valeri
- Filtration Gas Combustion in a Porous Ceramic Annular Burner for Thermoelectric Power Conversion
- Budiarso, Budiarso
- The Effect of Plasma Actuator Utilization to the Reduction of Aerodynamics Drag of Cylinder and Box Models
- Bulat, Pavel
- Multi-scale Simulation of Two-Phase Flows in Energy Systems
- Byun, H.
- Two-phase Refrigerant Distribution in a Parallel Flow Minichannel Heat Exchanger Having Lower combining/dividing Header
- Byun, Jaewon
- Techno Economic Feasibility Study for Catalytic Butene Oligomers Production From Lignocellulosic Biomass Using 2-sec-butylphenol Solvents
- Cabaleiro, David
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Cabeza, Cecilia
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Cabeza, Luisa F.
- Numerical Modelling of High Temperature Latent Heat Storage
- Cabrera, Humberto
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Cai, Jian-Dong
- The Numerical Simulation and Research on the Process Parameters of GaN-MOCVD Reactor Chamber
- The Research of ZnO - MOCVD Operating Environment and Experimental Verification
- Çakmak, Tolga
- Clutch Pressure Plate Compactness Effect on the Clutch System Heat Dissipation
- Calderon, Antonio
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Calvo, Antonio
- Annual Performance Prediction of a Hybrid Brayton Thermosolar Plant
- Reducing the Cycle Variability in a Spark Ignition Simulated Engine
- Cammi, Antonio
- DYNASTY: An Experimental Loop for the Study of Natural Circulation with Internally Heated Fluids
- Cano-Banda, Fernando
- Effect of Different Geometry Flow Pattern on Heat Sink Performance
- Cao, Huali
- A Novel Extremum Seeking Scheme for Closed-Loop Jet Control
- Cao, Zhen
- Numerical Simulation of Plate Heat Exchanger with Improved Mesh Performance
- Numerical Study on Enhanced Heat Transfer in a Tube with Conical-mesh Frustums Inserted
- Carranza, Richard
- Dynamic Analysis of Helical Fin with Fixed Fin Tip Temperature Boundary Condition
- Carranza Chavez, Francisco
- Single Particle Motion Studies Using Stereo-Vision and Digital Image Processing
- Carvalho, Mariana
- Optimization of a Shell-And-Tube District Heat Condenser for a Small Back Pressure CHP Plant
- Castro Silva, Janaina
- Numerical Analysis of the Crosswind in Small Solar Chimney
- Catalin, Popa
- A Numerical Study of the Natural Convection Flow in an Asymmetrically Heated Vertical Channel: Effect of Heat Source Position
- Natural Convection Heat Transfer in a Rib-Roughened AsymmetricallyHeated Channel
- Cauzzi, Marco Tudor
- DYNASTY: An Experimental Loop for the Study of Natural Circulation with Internally Heated Fluids
- Celebioglu, Kutay
- CFD Based Hill Chart Construction and Similarity Study of Prototype and Model Francis Turbines for Experimental Tests
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Celik, Nevin
- Heat Transfer Enhancement by Using Holed-Pin Fins in a Concentric Heat Exchanger
- Heating System Evaluation of an Ancient Turkish Bath; the Bath of Suleymaniye Hospital
- Celik, Serdar
- Design Analysis of a Rotary-Type Magnetic Cooler
- Cetinturk, Huseyin
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Ceylan, Cemal
- Determination of the Vapor Bubble Diameter of FC3284, FC84 and Their Binary Mixtures During Pool Boiling
- Chana, Kam
- A Novel Sensor for Detection of Oil Condition and Contamination Based on a Thermal Approach
- Chandratilleke, Tilak
- Thermal Performance and Optimisation of a Granular-bed Heat Recuperator
- Charnay, Romain
- Two-phase Heat Transfer Measurements of R254fa At High Saturation Temperatures in Horizontal Mini-channels
- Charogiannis, Alexandros
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Chatelain, Philippe
- On the Use of Momentum and Kinetic Energy Tubes for Analyzing Transport Phenomena in a Supersonic Ejector
- Chen, Liang
- Simulation of Self-Pressurization in Cryogenic Propellant Tank
- Chen, Siyuan
- Simulation of Self-Pressurization in Cryogenic Propellant Tank
- Chen, Xiangjie
- Theoretical Investigation of Heat and Mass Transfer for Hollow Fibre Integrated Evaporative Cooling System
- Cheng, Jiangtao
- Electrowetting-Controlled Dual Liquid Prism for Adaptive Beam Steering
- Optimization of Superhydrophobic Surfaces Promoting Continuous Dropwise Condensation
- Cherdantsev, Andrey
- An Investigation of Film Wavy Structure in Annular Flow Using Two Simultaneous LIF Approaches
- Chiva, Sergio
- Analysis and Optimization of a Vertical Axis Wind Turbine Savonius-Type Panel Using CFD Techniques
- Choi, Hae-Man
- Performance Evaluation of an Oil Leakage Monitoring System Using Ultrasonic Sensors
- Choi, Jae Hoon
- Improvement of Aerodynamic Performance Prediction of HAWT Rotor Blades by a Crossflow Turbulence Transition Model
- Choi, Juho
- Process Development and Economic Analysis of Carbon Dioxide to Dimethyl Carbonate
- Chu, Shuangxia
- Spectrum Exergy Analysis of a Solar Photovoltaic Conversion Process
- Turbulence Intensity Effect on Sub-critical Vibration for an Elastic Cylinder Subject to Axial Flow
- Chugunov, Vladimir
- Mathematical Modeling of the Anomalous Transport of Radioactive Materials in a Porous Medium
- Chun, Sejong
- Performance Evaluation of an Oil Leakage Monitoring System Using Ultrasonic Sensors
- Ciałkowski, Michał
- Solution of Inverse Problem - Regularization Via Thermodynamical Criterion
- Cifuentes, Angel
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Cioncolini, Andrea
- Annular Flow: A Mechanistic Suite of Co-Validated Methods for Two-Phase Flow and Boiling/Condensation Heat Transfer
- Colak, Levent
- Modeling Thermodynamic Analysis and Simulation of Organic Rankine Cycle Using Geothermal Energy as Heat Source
- Colasson, Stéphane
- Thermo-Electric Energy Storage Using CO2 Transcritical Cycles and Ground Heat Storage
- Coletti, Francesco
- Management of Cleaning Types and Schedules in Refinery Heat Exchangers
- Colla, Laura
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Collings, Peter
- A Combined Organic Rankine Cycle-Heat Pump System for Domestic Hot Water Application
- Dynamic Organic Rankine Cycle with a Fixed Expansion Ratio Positive Displacement Expander
- Combrinck, Madeleine
- Boundary Layer Response to Arbitrary Acceleration
- Cormos, Ana-Maria
- Bioglycerol Reforming for Hydrogen-Based Power Generation: Process Configuration, Thermodynamic Simulation, Process Integration and Performance Assessments
- Innovative Energy Conversion Systems by Chemical Looping: Conceptual Design, Modeling and Simulation, Thermal Integration and Performance Evaluation
- Cormos, Calin-Cristian
- Bioglycerol Reforming for Hydrogen-Based Power Generation: Process Configuration, Thermodynamic Simulation, Process Integration and Performance Assessments
- Innovative Energy Conversion Systems by Chemical Looping: Conceptual Design, Modeling and Simulation, Thermal Integration and Performance Evaluation
- Coronas, Alberto
- Theoretical and Experimental Study of NH3 Absorption Into Ammonia-Water Solution Using Polymeric Porous Membranes
- Cossali, Gianpietro
- Comparison Between Molar-And Mass-Based Approaches to Drop Evaporation Modelling
- The Effect of Temperature Dependence of Density and Mass Diffusion Coefficient on the Mass Transport From a Drop Evaporating in Hot Gaseous Environment
- Costa, André
- A Differential Algebraic Model for the Simulation of Thermosiphon Systems
- Costa, Antonella
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Costa, Caliane
- Heat Exchanger Networks Using Hybrid Meta-Heuristic Approach
- Costa, Vitor
- Modeling and Simulation of Tankless Gas Water Heaters to Reduce Temperature Overshoots and Undershoots
- Cozzi, Fabio
- Design and Commissioning of a Laser Doppler Velocimetry Seeding System for Non-ideal Fluid Flows
- Criens, Chris
- Thermodynamic Screening of Organic Rankine Cycle Working Fluids and Architectures: Application to Automotive Internal Combustion Engines
- Cuevas, Cristian
- Alternative Study of Heat Transfer on Radiant Ceiling Systems Oriented to Commissioning Process in Real Buildings
- Cuhadaroglu, Burhan
- Influences of Side Wall Angle on Heat Transfer of Power-Law Fluids in Trapezoidal Enclosures
- Curto-Risso, Pedro
- Reducing the Cycle Variability in a Spark Ignition Simulated Engine
- Dahlquist, Erik
- CFD Modeling of Real Scale Slab Reheating Furnace
- Dala, Laurent
- Boundary Layer Response to Arbitrary Acceleration
- Dario, Evandro
- Boiling Heat Transfer Inside Parallel Microchannels
- Daware, Santosh
- Nanocoolants for Engine Cooling System
- de Gracia, Alvaro
- Numerical Modelling of High Temperature Latent Heat Storage
- De Jaeger, Peter
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- De Kerpel, Kathleen
- On the Numerical Simulation of Fins in Natural Convection
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- De León Herrera, Carmen
- Thermodynamic Based Response Time as Controllability Indicator on Heat Exchanger Networks
- De Paepe, Michel
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Comparison of Heat Transfer and Pressure Drop Between Analytical and Computational Approaches: A Preliminary Study for Optimal Heat Exchanger Design
- Evaluation of Heat Transfer Correlations for Helical Coils Based on Measurements of a Solar ORC Operating At Subcritical Conditions
- Experimental Investigation of a Helical Coil Heat Exchanger Operating At Sub- And Supercritical State in a Small-scale Solar ORC Installations
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- High-Frequency Oscillating Water Flow in Highly-Porous Media: Experimental Results for 10-ppi Metal Foam
- On the Numerical Simulation of Fins in Natural Convection
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- Organic Rankine Cycle Part-Load Characterization: Validated Models of an 11 kWe Waste Heat Recovery ORC
- Thermal Analysis of Absorption Heat Pump Implementation in an Industrial Dryer
- Thermodynamic Screening of Organic Rankine Cycle Working Fluids and Architectures: Application to Automotive Internal Combustion Engines
- Two-phase Heat Transfer Measurements of R254fa At High Saturation Temperatures in Horizontal Mini-channels
- De Schampheleire, Sven
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- High-Frequency Oscillating Water Flow in Highly-Porous Media: Experimental Results for 10-ppi Metal Foam
- On the Numerical Simulation of Fins in Natural Convection
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- Degroote, Joris
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Deichsel, Michael
- CFD-Simulation and Experimental Validation of Heat Transfer in Liquid Piston Compressors
- DeJarnette, Drew
- High Temperature Optical Properties of Nanoparticle Suspensions for Direct Solar Absorption
- del Cañizo, Carlos
- Lowering the Energy Consumption of the CVD Polysilicon Production Process for Photovoltaics
- Delgado, Osvaldo
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Denisov, Maxim
- Influence of Pressure on Film Boiling of Subcooled Liquid
- Denner, Fabian
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Devia-Cruz, Luis
- Fluorescence Temperature Measurement of Optical Cavitation
- Dghim, Marouen
- Development of Turbulent Wakes Evolving From Asymmetric Shear Layers
- Diaz-Bejarano, Emilio
- Management of Cleaning Types and Schedules in Refinery Heat Exchangers
- Dikec, Eren
- Modelling of Fibrous Materials Used in High Temperature Applications
- Ding, Yulong
- Synthesis and Characterization of Thermochemical Storage Material Combining Porous Zeolite and Inorganic Salts
- Thermal Properties of a Novel Medium Temperature Thermal Energy Storage Composite Based on Sodium Nitrate as Phase Change Material
- Dirker, Jaco
- A Condensation Heat Transfer Correlation for Inclined Smooth Tubes
- Experimental Investigation Into the Effect of Circumferential Non-Uniform Heat Flux on a Circular Tube in the Laminar Flow Regime
- Transitional Flow Regime Heat Transfer in a Horizontal Annular Passage Associated with Mixed Convection and Non-uniform Wall Temperature Boundary Condition
- Turbulent Mixed Convection Heat Transfer for Non-uniform Heat Flux Distributions on a Horizontal Circular Tube
- Disli, Gulsen
- Heating System Evaluation of an Ancient Turkish Bath; the Bath of Suleymaniye Hospital
- Dogu, Orkun
- Modelling of Fibrous Materials Used in High Temperature Applications
- Dohmen, Hans Josef
- Parametric Study of a Novel Groove Design for Dry Gas Seals
- Domínguez Fernández, Irene
- Effect of Temperature on Physical Properties for Binary Systems: Deep Eutectic Solvent and Alcohols
- Physical Properties of Binary Mixtures: Ionic Liquids + Alcohols
- Domínguez Santiago, Ángeles
- Physical Properties of Binary Mixtures: Ionic Liquids + Alcohols
- Doo, Jeong Hoon
- Three-dimensional Flow Instability of Natural Convection Induced by Variation in Radius of Inner Circular Cylinder Inside Cubic Enclosure
- Drabiniok, Evelyn
- Evaporation Cooling Using a Bionic Micro Porous Evaporation System
- Dubovsky, Vadim
- An Analytical Technique of Transient PCM Melting Calculation for Different PCM Containers Cases
- Dukhan, Nihad
- High-Frequency Oscillating Water Flow in Highly-Porous Media: Experimental Results for 10-ppi Metal Foam
- Eames, Philip
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Ebieto, Celestine
- Measuring the Temperature of a Flame Propagating Through a Quartz Tube Using High Speed Colour Imaging and Thin SiC Filament Based Two Colour Method
- Ekins-Daukes, Nicholas
- Performance Assessment and Comparison of Solar ORC and Hybrid PVT Systems for the Combined Distributed Generation of Domestic Heat and Power
- Ekrami, Navid
- Modelling of an Air-Based BIPV/T with Heat Fins in EnergyPlus
- Ekren, Orhan
- Design Analysis of a Rotary-Type Magnetic Cooler
- El Ganaoui, Mohammed
- Thermal Energy Storage Using Sand. A Numerical Study for Thermal and Fluidic Performances
- El Hocine, Benhamza
- Rayleigh-Bénard Convection of Cu-Water and CuO-Water Nanofluids in Rectangular Enclosure
- El-jummah, Abubakar
- Impingement Heat Transfer: Predictions of the Influence of Reduced Crossflow Using Large Gaps
- El-sadi, Haifa
- Thermodynamics Properties of Supercritical Fluid and Its Effect on the Extraction Efficiency of Phenanthrene From Soil
- El-Sharkh, Mohamed
- Analysis of Heat Transfer and Fluid Flow Characteristics of A Hydrogen Reformer for Fuel Cell Applications
- Elnajjar, Emad
- Enhancing Heat Transfer Rate by Interaction of Water - Liquid Metal Interface Surface
- Endo, Takuya
- Heat Exchange Performance of Ground Source Heat Pump by Water Cooling Method
- Engdahl, Jonas
- CFD Modeling of Real Scale Slab Reheating Furnace
- Erbay, L. Berrin
- Numerical Characterization of a Jet Impingement Cooling System
- Errera, Marcelo
- Waste Pressure Energy Recovering Hybrid System for Evaporative Cooling
- Escrivá, Alberto
- Comparison of Polynomial Chaos Expansion Methods for Uncertainty Quantification in CFD Simulations
- Experimental Characterization of the Entrained Droplet Velocities Into a Submerged Gaseous Jet
- Influence of the Spacer Location and the Direct Heating in the Single and Two Phase Region on the Development of In-Phase Instabilities of BWR
- Spatial and Time Evolution of Non Linear Waves in Falling Liquid Films by the Harmonic Expansion Method with Predictor-Corrector Integration
- Study of Pool Scrubbing Events Under Jet Injection Regime
- Everts, Marilize
- Comparison of the Heat Transfer Characteristics of Developing and Fully Developed Flow in Smooth Tubes in the Transitional Flow Regime
- Ewim, Daniel
- Flow Pattern and Experimental Investigation of Heat Transfer Coefficients During the Condensation of R134a At Low Mass Fluxes in a Smooth Horizontal Tube
- Ezzatti, Pablo
- Reducing the Cycle Variability in a Spark Ignition Simulated Engine
- Fabris, Drazen
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Faik, Ahmad Muneer El-Deen
- Flame Colour Analysis for the Droplet Combustion of Water-in-diesel Emulsions
- The Investigation of Droplet Combustion Characteristics of Biodiesel-Diesel Blends Using High Speed Camera
- Fan, Bing-Feng
- The Numerical Simulation and Research on the Process Parameters of GaN-MOCVD Reactor Chamber
- The Research of ZnO - MOCVD Operating Environment and Experimental Verification
- Fan, Dewei
- A Novel Extremum Seeking Scheme for Closed-Loop Jet Control
- Fan, Yilin
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Numerical Study on the Improvement of Flow Distribution Uniformity Among Parallel Minichannels
- Fang, Yuan
- Analytical and Experimental Describing the Heat Transfer in Metal Quenching with Water Sprays and Jets
- Farrugia, Mario
- Diesel Particulate Filter Loading and Regeneration Issues in City/Congested Driving
- Experimental Investigation on the Effects of Voltage on A Domestic Refrigerator
- Fedele, Laura
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Feidt, Michel
- Thermo-Economic and Environmental Assessment of a Hybrid Solar Power Plant with a Packed-bed Thermal Storage and a Supercritical ORC Power Block
- Ferchichi, Mohsen
- Development of Turbulent Wakes Evolving From Asymmetric Shear Layers
- Fernández-Lorenzo, Concha
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Fernández-Seara, José
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Fidalgo Blanco, Rubén
- Effect of Temperature on Physical Properties for Binary Systems: Deep Eutectic Solvent and Alcohols
- Physical Properties of Binary Mixtures: Ionic Liquids + Alcohols
- Filippov, Yuri
- Monitoring of Multiphase Flows for Different Applications
- Fleming, Simon
- The Impact of Capillary Instability and Furnace Operating Conditions on the Fabrication of Drawn Metamaterials
- Fogiatto, Marcelo
- Thermal Transmittance Evaluation of Concrete Hollow Blocks
- Fomin, Sergei
- Mathematical Modeling of the Anomalous Transport of Radioactive Materials in a Porous Medium
- Fonseca, Nestor
- Alternative Study of Heat Transfer on Radiant Ceiling Systems Oriented to Commissioning Process in Real Buildings
- Foroushani, Sepehr
- Convective Heat Transfer in Hydrodynamically-Developed Laminar Flow in Asymmetrically Heated Annuli: A Three-Temperature Problem
- Frąckowiak, Andrzej
- Solution of Inverse Problem - Regularization Via Thermodynamical Criterion
- Freeman, James
- Performance Assessment and Comparison of Solar ORC and Hybrid PVT Systems for the Combined Distributed Generation of Domestic Heat and Power
- Freire Caporale, Daniel
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Fukuda, Kohei
- Numerical Investigation of Internal Flows with Sub-Cooled Nucleate Boiling
- Fukui, Masahiro
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Funatani, Shumpei
- Calorimetry of Ground Source Heat Pump Using Direct Expansion Method －Measurement of Flow Rate Using PIV Method－
- Calorimetry of Heat Pump System Using Ultra-fine Fluorescent Wires and PIV
- Heat Exchange Performance of Ground Source Heat Pump by Water Cooling Method
- Heat Transfer and Fluid Flow Characteristics of Air-Water Heat Exchanger Inserting Metal Wire
- Performance Evaluation of Ground Source Heat Pump Using Direct Expansion Method
- Fung, Alan
- Modelling of an Air-Based BIPV/T with Heat Fins in EnergyPlus
- Gadala, Mohamed
- Study of the Deformation of Compressor Blades During Rotating Stall
- Gallardo-Bernal, Juan Jesús
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Gallarini, Simone
- Design and Commissioning of a Laser Doppler Velocimetry Seeding System for Non-ideal Fluid Flows
- Gampe, Uwe
- Solution of Inverse Problem - Regularization Via Thermodynamical Criterion
- Gao, Shanfu
- LES Analysis on Cylinder Cascade Flow Based on Energy Ratio Coefficient
- Gaume, Benjamin
- Development of a Modal Sub-structuring Method: Application to Thermal Simulations of LNG Carriers
- Gauthier, Bruno
- Impact of the Form of a Trailer on Its Aerodynamic Performance
- Ge, Yanling
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Geng, Shibin
- A Dynamic Control Model to Improve the Response Speed for an Air-condition System
- Gervasio, Paola
- Point Thermal Transmittance of Rib Intersections in Concrete Sandwich Wall Panels
- Ghajar, Afshin
- Effect of Pipe Surface Roughness on Frictional Pressure Drop in Gas-Liquid Two Phase Flows
- Ghiaus, Christian
- Thermal Networks Considering Graph Theory and Thermodynamics
- Ghotbi, Cyrus
- Thermodynamic Modeling of Wax Precipitation in Crude Oil Based on PC-SAFT Model
- Gimeno-Furio, Alexandra
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Gómez-Barreiro, Silvia
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Gómez-Villarejo, Roberto
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Gonçalves, Leandro
- Numerical Analysis of the Crosswind in Small Solar Chimney
- Gonçalves Andrade, Cid
- Thermodynamic Based Response Time as Controllability Indicator on Heat Exchanger Networks
- González de Prado, Begoña
- Effect of Temperature on Physical Properties for Binary Systems: Deep Eutectic Solvent and Alcohols
- Physical Properties of Binary Mixtures: Ionic Liquids + Alcohols
- González Sas, Olalla
- Effect of Temperature on Physical Properties for Binary Systems: Deep Eutectic Solvent and Alcohols
- Physical Properties of Binary Mixtures: Ionic Liquids + Alcohols
- González-Juárez, Daniel
- Enhanced Heat Transfer in Oscillatory Flows Within Multiple-hole Baffled Tubes
- Gonzalez-Valle, C. Ulises
- Effect of Different Geometry Flow Pattern on Heat Sink Performance
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Gorde, Rajesh
- Hydraulic Jumps and Their Interactions Due to Multiple Impinging Liquid Jets on a Flat Horizontal Surface
- Gracia-Fernández, Carlos
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Granbohm, Henrika
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Guardone, Alberto
- Design and Commissioning of a Laser Doppler Velocimetry Seeding System for Non-ideal Fluid Flows
- Guarracino, Ilaria
- A Thermo-Economic Comparison of the Up-THERM Heat Converter and an ORC Engine
- Performance Assessment and Comparison of Solar ORC and Hybrid PVT Systems for the Combined Distributed Generation of Domestic Heat and Power
- Guglielmo, Christopher
- Unsteady Aerodynamic Loads During Flapping Flight of Birds; Case Study: Starling and Sandpiper
- Guimaraes, Deliene
- The Investigation of Ignition Delay Times of T-fuel and U-fuel Mixtures Using Shock Tube with Flame Detection
- Guimaraes, Gilmar
- The Use of TFBGF Method with a 3D Transient Analytical Solution to Solve an Inverse Heat Conduction Problem in the Presence of a Moving Heat Source
- Gurka, Roi
- Unsteady Aerodynamic Loads During Flapping Flight of Birds; Case Study: Starling and Sandpiper
- Guzej, Michal
- Advanced Methodology of Determination Water Jet Cooling Intensity During the Casting Process
- Ha, Man Yeong
- Natural Convection in a Square Enclosure with a Circular Cylinder and Adiabatic Side Walls According to the Bottom Wall Temperature Variation
- Numerical Study of the High-Speed Bypass Effect on a Plate-Fin Type Heat Exchanger
- Three-dimensional Flow Instability of Natural Convection Induced by Variation in Radius of Inner Circular Cylinder Inside Cubic Enclosure
- Hah, Seungryong
- Thermo-Hydraulic Performance Comparison of Steady Laminar Flow Channels
- Haider, Sajjad
- CFD Modelling of Radiative Heat Transfer of an In-House Helium Stabilized, Laminar Premixed Flat Flame
- Haimi, Eero
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Halawa, Taher
- Study of the Deformation of Compressor Blades During Rotating Stall
- Hamda, Mohamed
- Bubble Dynamics in Pool Boiling of Nanofluids
- Hamed, Mohamed
- Bubble Dynamics in Pool Boiling of Nanofluids
- Bubble Dynamics Under an Impinging Jet
- Hamedani, Ali
- Evaluation of Single Heated Channel and Subchannel Modeling on a Nuclear Once Through Steam Generator (OTSG)
- Hameed, Amar
- Study Gas Flow Heating in Micro-Nozzle Through Walls Instead of Preheating
- Hamze, Jawad
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Han, Jee-Hoon
- A Strategy for Production of 1,4-Pentanediol From Cellulose and Hemicellulose of Lignocellulosic Biomass
- Process Development and Economic Analysis of Carbon Dioxide to Dimethyl Carbonate
- Process Synthesis and Analysis for Catalytic Biofuel Production From Separate Conversion of Hemicellulose and Cellulose Using Lignin-Derived Alkylphenol Solvents
- Techno Economic Feasibility Study for Catalytic Butene Oligomers Production From Lignocellulosic Biomass Using 2-sec-butylphenol Solvents
- Hanriot, Sergio
- Numerical Analysis of the Crosswind in Small Solar Chimney
- The Investigation of Droplet Combustion Characteristics of Biodiesel-Diesel Blends Using High Speed Camera
- The Investigation of Ignition Delay Times of T-fuel and U-fuel Mixtures Using Shock Tube with Flame Detection
- Hao, Zhiyong
- Simultaneous Measurements of Turbulent Energy and Temperature Dissipation Rates in the Far Field of a Slightly Heated Cylinder Wake
- Hardalupas, Yannis
- The Influence of Nanofluid pH on Natural Convection
- Harinaldi, Harinaldi
- The Effect of Plasma Actuator Utilization to the Reduction of Aerodynamics Drag of Cylinder and Box Models
- Haroun, Mahgerefteh
- Numerical Simulation of CO2 Flows in Pipes with Phase Transition Across the Triple Point
- Hartmann, Sarah
- Evaporation Cooling Using a Bionic Micro Porous Evaporation System
- Hasegawa, Shinya
- Numerical Investigation of Nonlinear Heat Transfer Effects in a Thermoacoustic Device
- Hashida, Toshiyuki
- Mathematical Modeling of the Anomalous Transport of Radioactive Materials in a Porous Medium
- Haslam, Andrew
- A Thermo-Economic Comparison of the Up-THERM Heat Converter and an ORC Engine
- Hemmer, Cedric
- A Numerical Study of the Natural Convection Flow in an Asymmetrically Heated Vertical Channel: Effect of Heat Source Position
- Henriquez, Luis
- Filtration Gas Combustion in a Porous Ceramic Annular Burner for Thermoelectric Power Conversion
- Henshall, Paul
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Hernandez, Leonor
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Hernandez-Cruz, Guillermo
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Hernandez-Guerrero, Abel
- Effect of Different Geometry Flow Pattern on Heat Sink Performance
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Herranz, Luis enrique
- Study of Pool Scrubbing Events Under Jet Injection Regime
- Herrero, Ruth
- Enhanced Heat Transfer in Oscillatory Flows Within Multiple-hole Baffled Tubes
- Herz, Fabian
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- The Effect of Solid Bed Dispersity on the Contact Heat Transfer in Rotary Drums
- Heydari, Naser
- Simulation of Vortex Tube Using Natural Gas as Working Fluid with Application in City Gas Stations
- Horsky, Jaroslav
- Advanced Methodology of Determination Water Jet Cooling Intensity During the Casting Process
- Hosain, Md Lokman
- CFD Modeling of Real Scale Slab Reheating Furnace
- Hu, Di
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Hu, Haipin
- LES Analysis on Cylinder Cascade Flow Based on Energy Ratio Coefficient
- Huan, Zhongjie
- Thermal Efficiency and Entropy Generation for a Parabolic Trough Receiver At Different Concentration Ratios
- Huang, Rui
- Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers
- Huang, Xianai
- Study on the Surface Changes of Heat-Treated Aspen Wood Due to Aging by Different Techniques
- Huang, Xiaobing
- Numerical Simulation and Analytical Models for Thin Film CdTe Layers Deposited by an Inline AP-MOCVD Process
- Huang, Yuqi
- Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers
- Hübner, Dirk
- Investigations on Fluid Dynamics of Hydraulic Accumulators
- Hughes, Thomas
- Thermal Management of Downhole Measuring Tools Using Thermoelectric Cooling; A Numerical and Experimental Investigation
- Huisseune, Henk
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Experimental Investigation of a Helical Coil Heat Exchanger Operating At Sub- And Supercritical State in a Small-scale Solar ORC Installations
- On the Scatter of Experiments Done with Open-cell Metal Foam in Open Literature
- Hutchinson, Brad
- Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter Rotating Fans Stage
- Hyde, Trevor
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Ibarra, Roberto
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Ibrahim-Aboko, Jacob
- Experimental Investigation of the Viscosity of Nanofluid Prepared From Banana-fiber Nanoparticles
- Investigation Into Thermal Conductivity of Palm Kernel Fibre Nanofluids with Mixture of Ethylene Glycol/Water as Base Fluid
- Ichimiya, Koichi
- Performance Evaluation of Ground Source Heat Pump Using Direct Expansion Method
- Inanli, Sinan
- A Test Bench for Gas Turbine Combustor Cooling Investigations
- Experimental Investigation of Effusion and Film Cooling for Gas Turbine Combustor
- Iqbal, Owais
- Numerical Investigation of Internal Flows with Sub-Cooled Nucleate Boiling
- Ishiguro, Shuhei
- Heat Exchange Performance of Ground Source Heat Pump by Water Cooling Method
- Performance Evaluation of Ground Source Heat Pump Using Direct Expansion Method
- Islam, Md
- Study of Winglets Vortex Generators in A Circular Tube for Thermal Enhancement
- Ismail, Kamal
- Enhancement of Solidification of PCM Around Finned Tubes
- Experimental Study of Fusion and Solidification of Phase Change Material (PCM) in Spherical Geometry
- Ispir, Ali Can
- Modelling of Fibrous Materials Used in High Temperature Applications
- Ivarsson, Anders
- CFD Modelling of Radiative Heat Transfer of an In-House Helium Stabilized, Laminar Premixed Flat Flame
- Jafargholinejad, Shapour
- Simulation of Vortex Tube Using Natural Gas as Working Fluid with Application in City Gas Stations
- Jafari Behbahani, Taraneh
- Thermodynamic Modeling of Wax Precipitation in Crude Oil Based on PC-SAFT Model
- Jain, Deepak
- Nanocoolants for Engine Cooling System
- Jaouahdou, Aroussia
- Experimental and Numerical Study of Freezing Water Around a Cylindrical Tube: Application to Desalination
- Jeong, Myunggeun
- Natural Convection in a Square Enclosure with a Circular Cylinder and Adiabatic Side Walls According to the Bottom Wall Temperature Variation
- Jicha, Miroslav
- Optimization of Flue Gas Desulphurization Absorber by Means of CFD Analysis
- Jin, Ruoyu
- Numerical Study on the Thermal Performance of Earth-tube System in Ningbo, China
- Johnson, Maike
- Numerical Modelling of High Temperature Latent Heat Storage
- Joly, Frédéric
- Development of a Modal Sub-structuring Method: Application to Thermal Simulations of LNG Carriers
- Jouhara, Hussam
- Temperature and Energy Performance of Open Refrigerated Display Cabinets Using Heat Pipes Shelves
- Julia, J. Enrique
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Juliá, José Enrique
- Experimental Characterization of the Entrained Droplet Velocities Into a Submerged Gaseous Jet
- Julian, James
- The Effect of Plasma Actuator Utilization to the Reduction of Aerodynamics Drag of Cylinder and Box Models
- Kaçar, Nadir
- Numerical Characterization of a Jet Impingement Cooling System
- Kaikko, Juha
- Optimization of a Shell-And-Tube District Heat Condenser for a Small Back Pressure CHP Plant
- Kakac, Sadik
- The Development of Mathematical Modeling for Nanofluid as a Porous Media in Heat Transfer Technology
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Kakorin, Igor
- Monitoring of Multiphase Flows for Different Applications
- Kalendar, Abdulrahim
- Numerical Study of Natural Convective Heat Transfer From Horizontal Heated Elements of Relatively Complex Shape That Have a Uniform Surface Heat Flux
- Kallamu, Usman
- Experimental Investigation of the Viscosity of Nanofluid Prepared From Banana-fiber Nanoparticles
- Kalliadasis, Serafim
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Kamel, Raghad
- Modelling of an Air-Based BIPV/T with Heat Fins in EnergyPlus
- Kamel, Talbi
- Three-dimensional Computation of Natural Convection in the Presence of Magnetic Field (Cubic Enclosure)
- Kanin, Pavel
- Influence of Pressure on Film Boiling of Subcooled Liquid
- Kapan, Sinan
- Heat Transfer Enhancement by Using Holed-Pin Fins in a Concentric Heat Exchanger
- Karadeniz, Cagri
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Karandikar, Prathamesh
- Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions by Agitated Heat Exchangers
- Karimi, Nader
- Numerical Study of Single Coal Particle Combustion in O2/N2 and O2/CO2 Atmospheres
- Kate, Ramesh
- Hydraulic Jumps and Their Interactions Due to Multiple Impinging Liquid Jets on a Flat Horizontal Surface
- Katolicky, Jaroslav
- Optimization of Flue Gas Desulphurization Absorber by Means of CFD Analysis
- Kawahara, Akimaro
- Air Purification Using Mists Generated by an Efficient Multi-Fluid Mixer
- Kawasaki, Yutaro
- Air Purification Using Mists Generated by an Efficient Multi-Fluid Mixer
- Kaya, Alihan
- Evaluation of Heat Transfer Correlations for Helical Coils Based on Measurements of a Solar ORC Operating At Subcritical Conditions
- Experimental Investigation of a Helical Coil Heat Exchanger Operating At Sub- And Supercritical State in a Small-scale Solar ORC Installations
- Kefalas, Alexander
- Parametric Study of a Novel Groove Design for Dry Gas Seals
- Khan, Mohd. Kaleem
- Parametric Study of Solar Air Heater with Different Rib Geometries
- Khatri, Kamal
- Energy and Exergy Analysis of a Solar Tri-Generation System Using TRNSYS
- Khayrullina, Aliya
- Effect of Inlet Air Temperature and Relative Humidity on Performance of PEM Fuel Cell
- Kheiri, Abdelhamid
- Thermal Energy Storage Using Sand. A Numerical Study for Thermal and Fluidic Performances
- Thermo-Economic and Environmental Assessment of a Hybrid Solar Power Plant with a Packed-bed Thermal Storage and a Supercritical ORC Power Block
- Khelladi, Sofiane
- Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter Rotating Fans Stage
- Kherief nacereddine, Mohamed
- Three-dimensional Computation of Natural Convection in the Presence of Magnetic Field (Cubic Enclosure)
- Khezzar, Lyes
- Rayleigh-Bénard Convection of Cu-Water and CuO-Water Nanofluids in Rectangular Enclosure
- Kim, Hyon Ho
- Performance Evaluation of an Oil Leakage Monitoring System Using Ultrasonic Sensors
- Kim, Kiwan
- Thermo-Hydraulic Performance Comparison of Steady Laminar Flow Channels
- Kim, Kyung Chun
- Convective Heat Transfer Characteristics of Flow Through Open-Cell Metal Foam Considering Real Structural Geometry
- Kim, Minsung
- Natural Convection in a Square Enclosure with a Circular Cylinder and Adiabatic Side Walls According to the Bottom Wall Temperature Variation
- Numerical Study of the High-Speed Bypass Effect on a Plate-Fin Type Heat Exchanger
- Kim, N.
- Two-phase Refrigerant Distribution in a Parallel Flow Minichannel Heat Exchanger Having Lower combining/dividing Header
- Kim, O.
- Two-phase Refrigerant Distribution in a Parallel Flow Minichannel Heat Exchanger Having Lower combining/dividing Header
- Kim, Sunghoon
- Process Synthesis and Analysis for Catalytic Biofuel Production From Separate Conversion of Hemicellulose and Cellulose Using Lignin-Derived Alkylphenol Solvents
- King, René
- Synchronous Shock Wave Emergence From Intersecting Ducts
- Kirmse, Christoph
- A Thermo-Economic Comparison of the Up-THERM Heat Converter and an ORC Engine
- Kitagawa, Yuuki
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Kılıç, Muhsin
- Clutch Pressure Plate Compactness Effect on the Clutch System Heat Dissipation
- Koç, Emre
- Hydrodynamics Performance of the Twin Blade Hydrofoil Arrangement for Possible Applications of Wind and Hydrokinetic Turbines
- Kocaefe, Duygu
- Impact of the Form of a Trailer on Its Aerodynamic Performance
- Study on the Surface Changes of Heat-Treated Aspen Wood Due to Aging by Different Techniques
- Kocaefe, Yasar
- Impact of the Form of a Trailer on Its Aerodynamic Performance
- Study on the Surface Changes of Heat-Treated Aspen Wood Due to Aging by Different Techniques
- Koeppen, Olaf
- Determination of the Vapor Bubble Diameter of FC3284, FC84 and Their Binary Mixtures During Pool Boiling
- Kolodziej, Jan
- Solution of Inverse Problem - Regularization Via Thermodynamical Criterion
- Kombo, Rainah
- Flow Pattern and Experimental Investigation of Heat Transfer Coefficients During the Condensation of R134a At Low Mass Fluxes in a Smooth Horizontal Tube
- Kominek, Jan
- Advanced Methodology of Determination Water Jet Cooling Intensity During the Casting Process
- Komossa, Hendrik
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- Kopp, Gregory
- Unsteady Aerodynamic Loads During Flapping Flight of Birds; Case Study: Starling and Sandpiper
- Kosmadakis, George
- Evaluation of Heat Transfer Correlations for Helical Coils Based on Measurements of a Solar ORC Operating At Subcritical Conditions
- Kouloulias, Konstantinos
- The Influence of Nanofluid pH on Natural Convection
- Kovrizhnykh, Alexey
- Monitoring of Multiphase Flows for Different Applications
- Kozmar, Hrvoje
- Wind-Tunnel Simulation of the Thermally Stratified Atmospheric Boundary Layer in Complex Terrain
- Kuznetsov, Sergey
- Wind-Tunnel Simulation of the Thermally Stratified Atmospheric Boundary Layer in Complex Terrain
- Kuzuu, Kazuto
- Numerical Investigation of Nonlinear Heat Transfer Effects in a Thermoacoustic Device
- Kvamme, Bjørn
- Modelling of CH4 Production Through the Depressurization Method From Bjornoya Gas Hydrate Basin Using Reactive Transport Simulator
- Kwon, Oh Joon
- Improvement of Aerodynamic Performance Prediction of HAWT Rotor Blades by a Crossflow Turbulence Transition Model
- Lago, Taynara
- Enhancement of Solidification of PCM Around Finned Tubes
- Experimental Study of Fusion and Solidification of Phase Change Material (PCM) in Spherical Geometry
- Lamberts, Olivier
- On the Use of Momentum and Kinetic Energy Tubes for Analyzing Transport Phenomena in a Supersonic Ejector
- Lanchas-Fuentes, Laura
- Management of Cleaning Types and Schedules in Refinery Heat Exchangers
- Landre Júnior, Janes
- Numerical Analysis of the Crosswind in Small Solar Chimney
- Laurinavicius, Darius
- Initiation of Water Turbulence in Concurrent Two-phase Flow
- Lavieille, Pascal
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Lazova, Marija
- Evaluation of Heat Transfer Correlations for Helical Coils Based on Measurements of a Solar ORC Operating At Subcritical Conditions
- Experimental Investigation of a Helical Coil Heat Exchanger Operating At Sub- And Supercritical State in a Small-scale Solar ORC Installations
- Leal, Laetitia
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Lecompte, Steven
- Organic Rankine Cycle Part-Load Characterization: Validated Models of an 11 kWe Waste Heat Recovery ORC
- Thermodynamic Screening of Organic Rankine Cycle Working Fluids and Architectures: Application to Automotive Internal Combustion Engines
- Ledo, Luiz Fernando
- Numerical Analysis of the Crosswind in Small Solar Chimney
- Lee, In-Beum
- A Strategy for Production of 1,4-Pentanediol From Cellulose and Hemicellulose of Lignocellulosic Biomass
- Lee, Kwan-Soo
- Improvement of Thermal Efficiency of a Radial Heat Sink with a Surrounding Structure
- Thermal Performance of a Scaled-Up Louvered Fin Heat Exchanger with Unequal Louver Pitch
- Lee, Min-Keon
- Investigation on the Calibration for the Membrane Type Heat Flux Sensor Using Micro Heater
- Lee, Sun-Kyu
- Investigation on the Calibration for the Membrane Type Heat Flux Sensor Using Micro Heater
- Lee, Yonghan
- Investigation on the Calibration for the Membrane Type Heat Flux Sensor Using Micro Heater
- Lefevre, Nicolas
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Leksin, Maxim
- Influence of Pressure on Film Boiling of Subcooled Liquid
- Leong, Wey
- Modelling of an Air-Based BIPV/T with Heat Fins in EnergyPlus
- Lester, Stephen
- Temperature and Energy Performance of Open Refrigerated Display Cabinets Using Heat Pipes Shelves
- Letan, Ruth
- An Analytical Technique of Transient PCM Melting Calculation for Different PCM Containers Cases
- Lezzi, Adriano
- Point Thermal Transmittance of Rib Intersections in Concrete Sandwich Wall Panels
- Li, Bo
- Turbulence Intensity Effect on Sub-critical Vibration for an Elastic Cylinder Subject to Axial Flow
- Li, Hailong
- CFD Modeling of Real Scale Slab Reheating Furnace
- Li, Hua Jun
- Numerical Study of Separated Boundary Layer Transition Under Adverse Pressure Gradient
- Li, Jian
- The Numerical Simulation and Research on the Process Parameters of GaN-MOCVD Reactor Chamber
- The Research of ZnO - MOCVD Operating Environment and Experimental Verification
- Li, Wenguang
- Experimental and Numerical Investigation of Thermal Performance of a Crossed Compound Parabolic Concentrator with PV Cell
- Liang, Guozhu
- Simulation of Self-Pressurization in Cryogenic Propellant Tank
- Lima, Eduardo
- A Differential Algebraic Model for the Simulation of Thermosiphon Systems
- Lima e Silva, Ana Lúcia
- A Cooling Rate Analysis in the GTA Aluminum Alloy Welding
- Numerical Simulation of External Compressible Flows Using the Immersed Boundary Method with Virtual Physical Model
- OpenFOAM Simulation and Experimental Analysis of the Influence of Geometric Parameters of Heat Sinks on Natural Convection
- Lima e Silva, Sandro Metrevelle
- A Cooling Rate Analysis in the GTA Aluminum Alloy Welding
- Numerical Simulation of External Compressible Flows Using the Immersed Boundary Method with Virtual Physical Model
- OpenFOAM Simulation and Experimental Analysis of the Influence of Geometric Parameters of Heat Sinks on Natural Convection
- Lino, Fatima
- Enhancement of Solidification of PCM Around Finned Tubes
- Experimental Study of Fusion and Solidification of Phase Change Material (PCM) in Spherical Geometry
- Lins, Tiago
- Linear Stability Analysis of Time-Dependent Immiscible Flow Displacements in Porous Media
- Lipatov, Igor
- Boundary Layer Response to Arbitrary Acceleration
- Liu, Chenchen
- Numerical Study on the Thermal Performance of Earth-tube System in Ningbo, China
- Liu, Haolong
- Study on Aerodynamic Performance in Turbomachines Based on Fluid-Structure Coupling Method
- Liu, Ming
- Numerical Modelling of High Temperature Latent Heat Storage
- Liu, Yongwen
- LES Analysis on Cylinder Cascade Flow Based on Energy Ratio Coefficient
- Liu, Zhentao
- Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers
- Ljung, Anna-Lena
- CFD Simulations Comparing Hard Floor and Raised Floor Configurations in an Air Cooled Data Center
- Lobão, Matheus
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- López, Bernabé
- Gas and Particle Size Characterizations of a Soot Generator for Fouling Studies in EGR Systems
- Lorenzin, Nikola
- Analysis of Application of Liquid Metal Coolants as Heat Transfer Fluid for Concentrated Solar Power Systems
- Lu, Zhenhua
- LES Analysis on Cylinder Cascade Flow Based on Energy Ratio Coefficient
- Luan, Huibao
- Numerical Simulation of Plate Heat Exchanger with Improved Mesh Performance
- Numerical Study on Enhanced Heat Transfer in a Tube with Conical-mesh Frustums Inserted
- Lugo, Luis
- Design and Transport Properties of Ethylene Glycol+Water-Based Nanofluids Containing Graphene Nanoplatelets
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Lundström, Staffan
- CFD Simulations Comparing Hard Floor and Raised Floor Configurations in an Air Cooled Data Center
- Luo, Lingai
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Numerical Study on the Improvement of Flow Distribution Uniformity Among Parallel Minichannels
- Luscietti, Davide
- Point Thermal Transmittance of Rib Intersections in Concrete Sandwich Wall Panels
- Luviano-Ortiz, J. Luis
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Luzzi, Lelio
- DYNASTY: An Experimental Loop for the Study of Natural Circulation with Internally Heated Fluids
- Ma, Zhen
- Measuring the Temperature of a Flame Propagating Through a Quartz Tube Using High Speed Colour Imaging and Thin SiC Filament Based Two Colour Method
- The Investigation of CO2 Effect on the Characteristics of Methane Diffusion Flame
- Mabrouk, Mohamed
- Thermo-Economic and Environmental Assessment of a Hybrid Solar Power Plant with a Packed-bed Thermal Storage and a Supercritical ORC Power Block
- Macchietto, Sandro
- Management of Cleaning Types and Schedules in Refinery Heat Exchangers
- Macedo, Eugenia
- Effect of Temperature on Physical Properties for Binary Systems: Deep Eutectic Solvent and Alcohols
- Magalhães, Elisan
- A Cooling Rate Analysis in the GTA Aluminum Alloy Welding
- Mahdavi, Mostafa
- Natural Convection Study of Brownian Nano-Size Particles Inside a Water-Filled Cavity by Lagrangian Tracking Approach
- Mahfoudi, Nadjiba
- Thermal Energy Storage Using Sand. A Numerical Study for Thermal and Fluidic Performances
- Maia, Cristiana
- Numerical Analysis of the Crosswind in Small Solar Chimney
- The Investigation of Ignition Delay Times of T-fuel and U-fuel Mixtures Using Shock Tube with Flame Detection
- Maktouf, Nabaouia
- Effects of a Moving Membrane on the Wake Behavior of a Circular Cylinder
- Mansouri, Seyed
- CFD Modelling of Radiative Heat Transfer of an In-House Helium Stabilized, Laminar Premixed Flat Flame
- Marin, Ernesto
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Markides, Christos
- A Thermo-Economic Comparison of the Up-THERM Heat Converter and an ORC Engine
- An Investigation of Film Wavy Structure in Annular Flow Using Two Simultaneous LIF Approaches
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Performance Assessment and Comparison of Solar ORC and Hybrid PVT Systems for the Combined Distributed Generation of Domestic Heat and Power
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Martín, Elisa
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Martín-Calleja, Joaquín
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Martínez, David
- Enhanced Heat Transfer in Oscillatory Flows Within Multiple-hole Baffled Tubes
- Martinez Cuenca, Raul
- Analysis and Optimization of a Vertical Axis Wind Turbine Savonius-Type Panel Using CFD Techniques
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Martynov, Sergey
- Numerical Simulation of CO2 Flows in Pipes with Phase Transition Across the Triple Point
- Mashhadi, Hossein
- Thermodynamic Modeling of Wax Precipitation in Crude Oil Based on PC-SAFT Model
- Matar, Omar
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Matter, Youssef
- Enhancing Heat Transfer Rate by Interaction of Water - Liquid Metal Interface Surface
- Maxson, Andrew
- A Review of Studies of Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions
- Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions by Agitated Heat Exchangers
- Maziukienė, Monika
- In Humid Gas Slipping Water Droplets Heat and Mass Transfer Processes Interaction
- Medina, Alejandro
- Annual Performance Prediction of a Hybrid Brayton Thermosolar Plant
- Reducing the Cycle Variability in a Spark Ignition Simulated Engine
- Mendes, Nathan
- Thermal Transmittance Evaluation of Concrete Hollow Blocks
- Mendez, Federico
- Theoretical Modeling of a Cavitating Mooney-Rivlin Microshell, with Multiple Scale Analysis
- Merchan, Rosa Pilar
- Annual Performance Prediction of a Hybrid Brayton Thermosolar Plant
- Mesgari, Sara
- High Temperature Optical Properties of Nanoparticle Suspensions for Direct Solar Absorption
- Metghalchi, Hameed
- Laminar Burning Speed and Flame Structure of Syngas/Oxygen/Helium and Syngas/Air/EDG Premixed Flame
- Meyer, Josua
- Comparison of the Heat Transfer Characteristics of Developing and Fully Developed Flow in Smooth Tubes in the Transitional Flow Regime
- Effect of Using Viscosity and Thermal Conductivity Models on Experimental Cavity Flow Natural Convection of CuO-Water Nanofluids
- Experimental Investigation Into the Effect of Circumferential Non-Uniform Heat Flux on a Circular Tube in the Laminar Flow Regime
- Experimental Investigation of the Viscosity of Nanofluid Prepared From Banana-fiber Nanoparticles
- Flow Pattern and Experimental Investigation of Heat Transfer Coefficients During the Condensation of R134a At Low Mass Fluxes in a Smooth Horizontal Tube
- Heat Transfer in the Transitional Flow Regime Inside Smooth Tubes with Twisted Tape Inserts
- Investigation Into Thermal Conductivity of Palm Kernel Fibre Nanofluids with Mixture of Ethylene Glycol/Water as Base Fluid
- Natural Convection Study of Brownian Nano-Size Particles Inside a Water-Filled Cavity by Lagrangian Tracking Approach
- Pressure Drop in the Transitional Flow Regime Inside Smooth Tubes with Twisted Tape Inserts
- Thermal Efficiency and Entropy Generation for a Parabolic Trough Receiver At Different Concentration Ratios
- Transitional Flow Regime Heat Transfer in a Horizontal Annular Passage Associated with Mixed Convection and Non-uniform Wall Temperature Boundary Condition
- Turbulent Mixed Convection Heat Transfer for Non-uniform Heat Flux Distributions on a Horizontal Circular Tube
- Wall Heat Flux Influence on the Thermodynamic Optimisation of Irreversibilities of a Circulating Fluidised Bed Combustor
- Michalcová, Vladimíra
- Wind-Tunnel Simulation of the Thermally Stratified Atmospheric Boundary Layer in Complex Terrain
- Mikielewicz, Dariusz
- A Concept of Evaporator Aided by Capillary Effect
- Experimental Investigation of Domestic Gas Boiler Fitted with ORC Module
- Mikkola, Valtteri
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Miklayev, Valery
- Monitoring of Multiphase Flows for Different Applications
- Miliauskas, Gintautas
- In Humid Gas Slipping Water Droplets Heat and Mass Transfer Processes Interaction
- Min, June Kee
- Numerical Study of the High-Speed Bypass Effect on a Plate-Fin Type Heat Exchanger
- Miquel, Arturo
- Comparison of Polynomial Chaos Expansion Methods for Uncertainty Quantification in CFD Simulations
- Spatial and Time Evolution of Non Linear Waves in Falling Liquid Films by the Harmonic Expansion Method with Predictor-Corrector Integration
- Miranda, Camila
- Thermodynamic Based Response Time as Controllability Indicator on Heat Exchanger Networks
- Miro, R
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Miscevic, Marc
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Mishra, Subhash
- Role of Short-Pulse Laser for Detection and Differentiation of Cancer Stages and Benign Lesion Within Human Skin
- Mohseni, Mohammad
- Surface Area Effects on Pariculate Drying in a Rotary Dryer
- Momayez, Ladan
- Development of Turbulent Wakes Evolving From Asymmetric Shear Layers
- Mondragon, Rosa
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Morgan, Rhys
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Morrone, Pietropaolo
- Comparative Investigation on the Performances of Organic Rankine Cycles (ORCs) for the Exploitation of Low Temperature Heat Sources
- Mortazavi, Halleh
- The Investigation of CO2 Effect on the Characteristics of Methane Diffusion Flame
- Moss, Roger
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Moura, Luiz
- Experimental Study of Fusion and Solidification of Phase Change Material (PCM) in Spherical Geometry
- Muangmora, Adisorn
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Muniyandi, Venkatesan
- Analysis of Fluid-Structure Interaction in Micromixers with Vibrating Walls
- Effect of Wall Surface Roughness on Droplet Cooling Over a Rectangular Heated Plate in an Enclosure
- Munoz-Cobo, José Luis
- Comparison of Polynomial Chaos Expansion Methods for Uncertainty Quantification in CFD Simulations
- Experimental Characterization of the Entrained Droplet Velocities Into a Submerged Gaseous Jet
- Influence of the Spacer Location and the Direct Heating in the Single and Two Phase Region on the Development of In-Phase Instabilities of BWR
- Spatial and Time Evolution of Non Linear Waves in Falling Liquid Films by the Harmonic Expansion Method with Predictor-Corrector Integration
- Study of Pool Scrubbing Events Under Jet Injection Regime
- Murillo-Gonzalez, Santiago
- Blood Viscoelasticity: Experimental Characterization and 2D-Numerical Simulation of the Blood Flow
- Mwesigye, Aggrey
- Thermal Efficiency and Entropy Generation for a Parabolic Trough Receiver At Different Concentration Ratios
- Nadim, Nima
- Thermal Performance and Optimisation of a Granular-bed Heat Recuperator
- Nafsun, Aainaa Izyan
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- The Effect of Solid Bed Dispersity on the Contact Heat Transfer in Rotary Drums
- Nakagawa, Tsuguhiko
- A Novel Integrated Energy System of Solar Power, Heat Pumps and AI-EV(Air-conditioner Integrated Electric Vehicle)
- Nam, Sung-Ki
- Investigation on the Calibration for the Membrane Type Heat Flux Sensor Using Micro Heater
- Nannou, Theodora
- Temperature and Energy Performance of Open Refrigerated Display Cabinets Using Heat Pipes Shelves
- Nasser, Adel
- Numerical Simulation of Film Cooling Effectiveness in a Rotating Blade At High Blowing Ratios
- Performance Improvement of a Counter-Flowing Double-Pipe Heat Exchanger Partially Filled with a Metal Foam and Rotating Coaxially
- Naude, Jorge
- Theoretical Modeling of a Cavitating Mooney-Rivlin Microshell, with Multiple Scale Analysis
- Navarrete, Margarita
- Theoretical Modeling of a Cavitating Mooney-Rivlin Microshell, with Multiple Scale Analysis
- Navarrete, Nuria
- Thermal and Optical Characterization of Tetraethylene Glycol - Based Solar Nanofluid At High Temperature Conditions
- Navarro, Helena
- Thermal Properties of a Novel Medium Temperature Thermal Energy Storage Composite Based on Sodium Nitrate as Phase Change Material
- Navas, Javier
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Naveros, Ibán
- Thermal Networks Considering Graph Theory and Thermodynamics
- Naylor, David
- Convective Heat Transfer in Hydrodynamically-Developed Laminar Flow in Asymmetrically Heated Annuli: A Three-Temperature Problem
- Ndenguma, Dickson
- Transitional Flow Regime Heat Transfer in a Horizontal Annular Passage Associated with Mixed Convection and Non-uniform Wall Temperature Boundary Condition
- Neves Gomes, Lorenzo Alfonso
- OpenFOAM Simulation and Experimental Analysis of the Influence of Geometric Parameters of Heat Sinks on Natural Convection
- Neyer, Andreas
- Evaporation Cooling Using a Bionic Micro Porous Evaporation System
- Nguyen, Denis
- Thermo-Electric Energy Storage Using CO2 Transcritical Cycles and Ground Heat Storage
- Nishiyama, Takashi
- Experimental Study of Nanobubbles and Nanodroplets on Hydrophilic/Hydrophobic Combined Surfaces
- Nobrega, Claudia
- Experimental Study of Fusion and Solidification of Phase Change Material (PCM) in Spherical Geometry
- NooriKalkhoran, Omid
- Evaluation of Single Heated Channel and Subchannel Modeling on a Nuclear Once Through Steam Generator (OTSG)
- Nunes, João
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- Okafor, Izuchukwu
- Turbulent Mixed Convection Heat Transfer for Non-uniform Heat Flux Distributions on a Horizontal Circular Tube
- Omura, Takeshi
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Onbasioglu, Seyhan
- Modelling of Fibrous Materials Used in High Temperature Applications
- Oosthuizen, Patrick
- A Numerical Study of Natural Convective Heat Transfer From Upward Facing Recessed and Protruding Heated Horizontal Isothermal Circular Elements
- Numerical Study of Natural Convective Heat Transfer From Horizontal Heated Elements of Relatively Complex Shape That Have a Uniform Surface Heat Flux
- Ordoñez, Javier
- Thermal Networks Considering Graph Theory and Thermodynamics
- Ortega Hermoso, Clara
- Effects of the Molding Compound's Thermal Conductivity on the Thermal State of the QFN64 Electronic Package Subjected to Natural Convection
- Ortega-Casanova, Joaquin
- Blood Viscoelasticity: Experimental Characterization and 2D-Numerical Simulation of the Blood Flow
- Thermal Comfort Levels in a Conditioned Environment with Displacement Ventilation and Radiant Cooling Floor Calculated Using Computational Fluid Dynamics
- Ortwig, Harald
- Investigations on Fluid Dynamics of Hydraulic Accumulators
- Ospina, Juan
- Dynamic Analysis of Helical Fin with Fixed Fin Tip Temperature Boundary Condition
- Otanicar, Todd
- High Temperature Optical Properties of Nanoparticle Suspensions for Direct Solar Absorption
- Oyewunmi, Oyeniyi
- A Thermo-Economic Comparison of the Up-THERM Heat Converter and an ORC Engine
- Oyinlola, Muyiwa
- Heat Transfer in Low Reynolds Number Flows Through Miniaturized Channels
- Ozkan, Selam
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Ozturk, M. Mete
- Transient Exergy Analysis of the Condenser and Evaporator of an Air Source Heat Pump Water Heater
- Pablo Ruiz Padillo, Diego
- Thermal Networks Considering Graph Theory and Thermodynamics
- Palanki, Srinivas
- Analysis of Heat Transfer and Fluid Flow Characteristics of A Hydrogen Reformer for Fuel Cell Applications
- Pan, Dartzi
- Computation of Conjugate Heat Transfer Over a 2D Circular Cylinder in a Low Speed Crossflow by a Ghost Cell Immersed Boundary Method
- Pang, Kar Mun
- CFD Modelling of Radiative Heat Transfer of an In-House Helium Stabilized, Laminar Premixed Flat Flame
- Park, Jin-Seoung
- Thermal Performance of a Scaled-Up Louvered Fin Heat Exchanger with Unequal Louver Pitch
- Park, Seung-Jae
- Improvement of Thermal Efficiency of a Radial Heat Sink with a Surrounding Structure
- Passos, Julio
- Boiling Heat Transfer Inside Parallel Microchannels
- Pastor, José Vicente
- Experimental Characterization of the Entrained Droplet Velocities Into a Submerged Gaseous Jet
- Pathak, Manabendra
- Parametric Study of Solar Air Heater with Different Rib Geometries
- Paton, Randall
- Effect of Surface Properties on Shock Wave Reflection
- Synchronous Shock Wave Emergence From Intersecting Ducts
- Paul, Manosh
- Experimental and Numerical Investigation of Thermal Performance of a Crossed Compound Parabolic Concentrator with PV Cell
- Numerical Study of Single Coal Particle Combustion in O2/N2 and O2/CO2 Atmospheres
- Pavão, Leandro
- Heat Exchanger Networks Using Hybrid Meta-Heuristic Approach
- Paz, Concepción
- Experimental Research of the Effect of Surface Orientation on the Subcooled Flow Nucleate Boiling of Water At Low Pressure
- Gas and Particle Size Characterizations of a Soot Generator for Fouling Studies in EGR Systems
- Pedemonte, Martin
- Reducing the Cycle Variability in a Spark Ignition Simulated Engine
- Peerhossaini, Hassan
- Development of Turbulent Wakes Evolving From Asymmetric Shear Layers
- Peña-Suárez, José Miguel
- Thermal Comfort Levels in a Conditioned Environment with Displacement Ventilation and Radiant Cooling Floor Calculated Using Computational Fluid Dynamics
- Pereira, Claubia
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Peters, Bernhard
- Surface Area Effects on Pariculate Drying in a Rotary Dryer
- Piasecka, Magdalena
- Impact of the Surface Enhancement on the Heat Transfer in a Minichannel
- Pigache, Francois
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Pilotelli, Mariagrazia
- Point Thermal Transmittance of Rib Intersections in Concrete Sandwich Wall Panels
- Pini, Alessandro
- DYNASTY: An Experimental Loop for the Study of Natural Circulation with Internally Heated Fluids
- Pioro, Igor
- Specifics of Heat Transfer At Supercritical Pressures
- Pistoresi, Cyril
- Numerical Study on the Improvement of Flow Distribution Uniformity Among Parallel Minichannels
- Pointner, Harald
- Numerical Modelling of High Temperature Latent Heat Storage
- Polidori, Guillaume
- A Numerical Study of the Natural Convection Flow in an Asymmetrically Heated Vertical Channel: Effect of Heat Source Position
- Natural Convection Heat Transfer in a Rib-Roughened AsymmetricallyHeated Channel
- Rayleigh-Bénard Convection of Cu-Water and CuO-Water Nanofluids in Rectangular Enclosure
- Polifke, Wolfgang
- Modeling Heat Transfer and Skin Friction Frequency Responses of a Cylinder in Cross-Flow - a Unifying Perspective
- Pollard, Andrew
- Vorticity Component Distributions in the Near Field of a Wall Jet
- Pospíšil, Stanislav
- Wind-Tunnel Simulation of the Thermally Stratified Atmospheric Boundary Layer in Complex Terrain
- Pradas, Marc
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Pramuanjaroenkij, Anchasa
- The Development of Mathematical Modeling for Nanofluid as a Porous Media in Heat Transfer Technology
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Pulat, Erhan
- Numerical Simulation of Thermal Flow and Comfort in an Office Room
- Puupponen, Salla
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Qiao, Geng
- Thermal Properties of a Novel Medium Temperature Thermal Energy Storage Composite Based on Sodium Nitrate as Phase Change Material
- Qorbani, Khadijeh
- Modelling of CH4 Production Through the Depressurization Method From Bjornoya Gas Hydrate Basin Using Reactive Transport Simulator
- Quéméner, Olivier
- Development of a Modal Sub-structuring Method: Application to Thermal Simulations of LNG Carriers
- Radulovic, Jovana
- Exergetic Analysis of Waste Heat ORC
- Rai, Beena
- Nanocoolants for Engine Cooling System
- Ramanauskas, Virginijus
- In Humid Gas Slipping Water Droplets Heat and Mass Transfer Processes Interaction
- Ramos, Alba
- Lowering the Energy Consumption of the CVD Polysilicon Production Process for Photovoltaics
- Ramos, Eduardo
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Ramos, Mario
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- Ravagnani, Mauro
- Heat Exchanger Networks Using Hybrid Meta-Heuristic Approach
- Thermodynamic Based Response Time as Controllability Indicator on Heat Exchanger Networks
- Ravelet, Florent
- Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter Rotating Fans Stage
- Ravichandran, Madhumitha
- Analysis of Fluid-Structure Interaction in Micromixers with Vibrating Walls
- Effect of Wall Surface Roughness on Droplet Cooling Over a Rectangular Heated Plate in an Enclosure
- Reid, Wesley
- Experimental Investigation Into the Effect of Circumferential Non-Uniform Heat Flux on a Circular Tube in the Laminar Flow Regime
- Reis, Mauricio
- Numerical Simulation of External Compressible Flows Using the Immersed Boundary Method with Virtual Physical Model
- Reis, Patricia
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Repaka, Ramjee
- Role of Short-Pulse Laser for Detection and Differentiation of Cancer Stages and Benign Lesion Within Human Skin
- Revellin, Rémi
- Two-phase Heat Transfer Measurements of R254fa At High Saturation Temperatures in Horizontal Mini-channels
- Riffat, Saffa
- Theoretical Investigation of Heat and Mass Transfer for Hollow Fibre Integrated Evaporative Cooling System
- Rigby, Sean
- Numerical Simulation and Analytical Models for Thin Film CdTe Layers Deposited by an Inline AP-MOCVD Process
- Roberts, Samuel
- Synthesis and Characterization of Thermochemical Storage Material Combining Porous Zeolite and Inorganic Salts
- Rodríguez, Araceli
- Lowering the Energy Consumption of the CVD Polysilicon Production Process for Photovoltaics
- Royon, Laurent
- Micro Grooved Surface Improve Dew Collection
- Rubio-Hernandez, Francisco-Jose
- Blood Viscoelasticity: Experimental Characterization and 2D-Numerical Simulation of the Blood Flow
- Rubtsov, Nikoly
- Numerical Simulation of Stefan's Problem in a Plane Layer with Selective Optical Properties of a Semitransparent Medium
- Ruck, Sebastian
- Effects of Rib-Configuration on the Thermal-Hydraulics of One-Sided Heated and Rib-Roughened Cooling Channels
- Saari, Jussi
- Optimization of a Shell-And-Tube District Heat Condenser for a Small Back Pressure CHP Plant
- Saari, Kari
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Sabariman, I.
- Analytical and Experimental Describing the Heat Transfer in Metal Quenching with Water Sprays and Jets
- Sabeeh, Ghanem
- Analysis of Heat Transfer and Fluid Flow Characteristics of A Hydrogen Reformer for Fuel Cell Applications
- Sadatomi, Michio
- Air Purification Using Mists Generated by an Efficient Multi-Fluid Mixer
- Safi, Mohamed
- Experimental and Numerical Study of Freezing Water Around a Cylindrical Tube: Application to Desalination
- San Martin, David
- Effects of the Molding Compound's Thermal Conductivity on the Thermal State of the QFN64 Electronic Package Subjected to Natural Convection
- San Martin, Pedro
- Filtration Gas Combustion in a Porous Ceramic Annular Burner for Thermoelectric Power Conversion
- Sánchez-Coronilla, Antonio
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Sand, Ulf
- CFD Modeling of Real Scale Slab Reheating Furnace
- Santos, Gerson
- Thermal Transmittance Evaluation of Concrete Hollow Blocks
- Santos, Maria Jesus
- Annual Performance Prediction of a Hybrid Brayton Thermosolar Plant
- Santos, Mischelle
- A Differential Algebraic Model for the Simulation of Thermosiphon Systems
- Sapin, Paul
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Sarasúa, Gustavo
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Savvinova, Nadezhda
- Numerical Simulation of Stefan's Problem in a Plane Layer with Selective Optical Properties of a Semitransparent Medium
- Scari, Maria
- Thermal Hydraulic Modelling of a High Temperature Nuclear Reactor
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Scherer, Viktor
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- Schlücker, Eberhard
- CFD-Simulation and Experimental Validation of Heat Transfer in Liquid Piston Compressors
- Schmid, Aloísio
- Waste Pressure Energy Recovering Hybrid System for Evaporative Cooling
- Schober, Magnus
- CFD-Simulation and Experimental Validation of Heat Transfer in Liquid Piston Compressors
- Schramm, Jesper
- CFD Modelling of Radiative Heat Transfer of an In-House Helium Stabilized, Laminar Premixed Flat Flame
- Sciacovelli, Adriano
- Synthesis and Characterization of Thermochemical Storage Material Combining Porous Zeolite and Inorganic Salts
- Segarra, Jose
- Analysis and Optimization of a Vertical Axis Wind Turbine Savonius-Type Panel Using CFD Techniques
- Semkło, Łukasz
- Solution of Inverse Problem - Regularization Via Thermodynamical Criterion
- Seo, Young Min
- Three-dimensional Flow Instability of Natural Convection Induced by Variation in Radius of Inner Circular Cylinder Inside Cubic Enclosure
- Sepetci, Gulsevim
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Šeporaitis, Marijus
- Initiation of Water Turbulence in Concurrent Two-phase Flow
- Seppälä, Ari
- Convective Heat Transfer Performance of Polystyrene, SiO2, Al2O3 and Micelle Nanofluids
- Facile Preparation of Concentrated Silver and Copper Heat Transfer Nanocolloids
- Sergis, Antonis
- The Influence of Nanofluid pH on Natural Convection
- Sermyagina, Ekaterina
- Optimization of a Shell-And-Tube District Heat Condenser for a Small Back Pressure CHP Plant
- Seshadri, Arunkumar
- Analysis of Fluid-Structure Interaction in Micromixers with Vibrating Walls
- Effect of Wall Surface Roughness on Droplet Cooling Over a Rectangular Heated Plate in an Enclosure
- Sevilgen, Gökhan
- Clutch Pressure Plate Compactness Effect on the Clutch System Heat Dissipation
- Sharif, Asal
- Comparison of Heat Transfer and Pressure Drop Between Analytical and Computational Approaches: A Preliminary Study for Optimal Heat Exchanger Design
- Feasibility Study of a Plastic Helical Coil Heat Exchanger for a Domestic Water Storage Tank
- On the Numerical Simulation of Fins in Natural Convection
- Sharifpur, Mohsen
- Effect of Using Viscosity and Thermal Conductivity Models on Experimental Cavity Flow Natural Convection of CuO-Water Nanofluids
- Experimental Investigation of the Viscosity of Nanofluid Prepared From Banana-fiber Nanoparticles
- Investigation Into Thermal Conductivity of Palm Kernel Fibre Nanofluids with Mixture of Ethylene Glycol/Water as Base Fluid
- Natural Convection Study of Brownian Nano-Size Particles Inside a Water-Filled Cavity by Lagrangian Tracking Approach
- Shemirani, Mehdi
- Investigating the Influence of Nano Particles Radius on Thermophysical Properties of Al2O3-Water Nanofluids Under Brownian Motion Effect
- Shen, Jingchun
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Shere, Lawrence
- Synthesis and Characterization of Thermochemical Storage Material Combining Porous Zeolite and Inorganic Salts
- Shi, Yongqiang
- Study on Aerodynamic Performance in Turbomachines Based on Fluid-Structure Coupling Method
- Shirakawa, Isao
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Shirani, Amir Saeid
- Evaluation of Single Heated Channel and Subchannel Modeling on a Nuclear Once Through Steam Generator (OTSG)
- Shire, Stan
- Heat Transfer in Low Reynolds Number Flows Through Miniaturized Channels
- Performance Tests of an Evacuated Flat Plate Solar Collector Under a Virtual Image Solar Simulator
- Sidawi, Khalil
- Specifics of Heat Transfer At Supercritical Pressures
- Siera, Ilja
- Thermodynamic Screening of Organic Rankine Cycle Working Fluids and Architectures: Application to Automotive Internal Combustion Engines
- Silva, Priscilla
- Enhancement of Solidification of PCM Around Finned Tubes
- Silva, Vilson
- OpenFOAM Simulation and Experimental Analysis of the Influence of Geometric Parameters of Heat Sinks on Natural Convection
- Simasiku, Ephraim
- Optimum Design of Heat Exchanger for Environmental Control System of an Aircraft Using Entropy Generation Minimization (EGM) Technique
- Simon, Maria Luisa
- Boiling Heat Transfer Inside Parallel Microchannels
- Singh, Ankush
- Energy and Exergy Analysis of a Solar Tri-Generation System Using TRNSYS
- Singh, Suneet
- Analytical Solution of 1-D Multiple Layer Dual Phase Lag Heat Conduction Problem with Generalized Time Dependent Boundary Condition
- Skews, Beric
- Effect of Surface Properties on Shock Wave Reflection
- Synchronous Shock Wave Emergence From Intersecting Ducts
- Sleptsov, Semen
- Numerical Simulation of Stefan's Problem in a Plane Layer with Selective Optical Properties of a Semitransparent Medium
- Solano, Juan Pedro
- Enhanced Heat Transfer in Oscillatory Flows Within Multiple-hole Baffled Tubes
- Somluk, Lalinee
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Specht, Eckehard
- Analytical and Experimental Describing the Heat Transfer in Metal Quenching with Water Sprays and Jets
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- Spinelli, Andrea
- Design and Commissioning of a Laser Doppler Velocimetry Seeding System for Non-ideal Fluid Flows
- Sridhar, Vikram
- A Novel Sensor for Detection of Oil Condition and Contamination Based on a Thermal Approach
- St Arnaud, De Marillac
- Effect of Using Viscosity and Thermal Conductivity Models on Experimental Cavity Flow Natural Convection of CuO-Water Nanofluids
- Staggs, John
- Impingement Heat Transfer: Predictions of the Influence of Reduced Crossflow Using Large Gaps
- Stalnov, Oksana
- Unsteady Aerodynamic Loads During Flapping Flight of Birds; Case Study: Starling and Sandpiper
- Stanescu, George
- Waste Pressure Energy Recovering Hybrid System for Evaporative Cooling
- Su, Yuehong
- Theoretical Investigation of Heat and Mass Transfer for Hollow Fibre Integrated Evaporative Cooling System
- Suarez, Eduardo
- Gas and Particle Size Characterizations of a Soot Generator for Fouling Studies in EGR Systems
- Sunden, Bengt
- Numerical Simulation of Plate Heat Exchanger with Improved Mesh Performance
- Numerical Study on Enhanced Heat Transfer in a Tube with Conical-mesh Frustums Inserted
- Suzuki, Anna
- Mathematical Modeling of the Anomalous Transport of Radioactive Materials in a Porous Medium
- Sveshnikova, Aleksandra
- Effect of Inlet Air Temperature and Relative Humidity on Performance of PEM Fuel Cell
- Sylvester, Nicholas
- Analysis of Heat Transfer and Fluid Flow Characteristics of A Hydrogen Reformer for Fuel Cell Applications
- T'Jollyn, Ilya
- Thermal Analysis of Absorption Heat Pump Implementation in an Industrial Dryer
- Tadrist, Lounès
- Boiling Heat Transfer Inside Parallel Microchannels
- Takahashi, Koji
- Experimental Study of Nanobubbles and Nanodroplets on Hydrophilic/Hydrophobic Combined Surfaces
- Takata, Yasuyuki
- Experimental Study of Nanobubbles and Nanodroplets on Hydrophilic/Hydrophobic Combined Surfaces
- Takeda, Tetsuaki
- Calorimetry of Ground Source Heat Pump Using Direct Expansion Method －Measurement of Flow Rate Using PIV Method－
- Calorimetry of Heat Pump System Using Ultra-fine Fluorescent Wires and PIV
- Heat Exchange Performance of Ground Source Heat Pump by Water Cooling Method
- Heat Transfer and Fluid Flow Characteristics of Air-Water Heat Exchanger Inserting Metal Wire
- Performance Evaluation of Ground Source Heat Pump Using Direct Expansion Method
- Taleb, Aly
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Tang, Llewellyn
- Numerical Study on the Thermal Performance of Earth-tube System in Ningbo, China
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Tao, Wenquan
- Numerical Simulation of Plate Heat Exchanger with Improved Mesh Performance
- Tarazona-Cardenas, Sindy
- Effect of Different Geometry Flow Pattern on Heat Sink Performance
- Visualization of the Flow Distribution Inside the Piston Displacement of a Gamma Type Stirling Engine
- Tartière, Thomas
- Thermo-Electric Energy Storage Using CO2 Transcritical Cycles and Ground Heat Storage
- Tascioglu, Yigit
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Tassou, Savvas
- Temperature and Energy Performance of Open Refrigerated Display Cabinets Using Heat Pipes Shelves
- Tauveron, Nicolas
- Low Grade Waste Heat Recovery in an Intercooled Recuperated Closed Cycle Gas Turbine
- Thermo-Electric Energy Storage Using CO2 Transcritical Cycles and Ground Heat Storage
- Tay, Steven
- Numerical Modelling of High Temperature Latent Heat Storage
- Taylor, Robert
- High Temperature Optical Properties of Nanoparticle Suspensions for Direct Solar Absorption
- Teruel, Miriam
- Themal Properties on Nanofluids Based on a High Temperature-Heat Transfer Fluid and Metallic Nanoparticles for Concentrating Solar Energy
- Theoretical Characterisation of Nanofluids Based on Metallic Nanoparticles and Organic Oils
- Thakur, Deep Singh
- Parametric Study of Solar Air Heater with Different Rib Geometries
- Thanomputra, Somjet
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Thome, John Richard
- Annular Flow: A Mechanistic Suite of Co-Validated Methods for Two-Phase Flow and Boiling/Condensation Heat Transfer
- Tolias, Ilias
- CFD Modeling of Vapor Cloud Explosion, Cold BLEVE and Hot BLEVE in a Large Scale Tunnel
- Tongkratoke, Amarin
- The Development of Mathematical Modeling for Nanofluid as a Porous Media in Heat Transfer Technology
- The Study of the Drying Application Distances From Condensing Unit Effecting on the Air Conditioning Performance and Drying Rate
- Tonini, Simona
- Comparison Between Molar-And Mass-Based Approaches to Drop Evaporation Modelling
- The Effect of Temperature Dependence of Density and Mass Diffusion Coefficient on the Mass Transport From a Drop Evaporating in Hot Gaseous Environment
- Topin, Frederic
- Pumping and Heat Transfer Enhancement by Wall's Morphing
- Travis, Jack
- Generalized Draining Film Model (DFM) Equation Set to Execute an Exact Numerical Solution
- Trávníček, Zdeněk
- Visualization and Heat Transfer Study of a Synthetic Jet Impinging on a Circular Cylinder
- Trivedi, Siddharth
- Synthesis and Characterization of Thermochemical Storage Material Combining Porous Zeolite and Inorganic Salts
- Tsukiyama, Shuji
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Turan, Ali
- Numerical Simulation of Film Cooling Effectiveness in a Rotating Blade At High Blowing Ratios
- Turan, Ali
- Performance Improvement of a Counter-Flowing Double-Pipe Heat Exchanger Partially Filled with a Metal Foam and Rotating Coaxially
- Turgut, Emre
- Heat Transfer Enhancement by Using Holed-Pin Fins in a Concentric Heat Exchanger
- Turki, Said
- Effects of a Moving Membrane on the Wake Behavior of a Circular Cylinder
- Uddin, Mohammed
- MHD Free Convective Slip Flow of a Nanofluid From a Nonlinearly Radiating Heated Upward Facing Horizontal Plate with Zero Mass Flux Boundary Condition
- Ugurlu, Busra
- Modelling of Fibrous Materials Used in High Temperature Applications
- Ulas, Abdullah
- A Test Bench for Gas Turbine Combustor Cooling Investigations
- Experimental Investigation of Effusion and Film Cooling for Gas Turbine Combustor
- Usera, Gabriel
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Ustinov, Alexander
- Effect of Inlet Air Temperature and Relative Humidity on Performance of PEM Fuel Cell
- V, Ravichandran
- Analysis of Fluid-Structure Interaction in Micromixers with Vibrating Walls
- Effect of Wall Surface Roughness on Droplet Cooling Over a Rectangular Heated Plate in an Enclosure
- Vagiokas, Nikolaos
- CFD Modeling of Vapor Cloud Explosion, Cold BLEVE and Hot BLEVE in a Large Scale Tunnel
- Vakhshouri, Mir Elyad
- Influences of Side Wall Angle on Heat Transfer of Power-Law Fluids in Trapezoidal Enclosures
- Vakkilainen, Esa
- Optimization of a Shell-And-Tube District Heat Condenser for a Small Back Pressure CHP Plant
- Valente, Osmano
- The Investigation of Ignition Delay Times of T-fuel and U-fuel Mixtures Using Shock Tube with Flame Detection
- Vallejo, Javier
- Flow Behaviour of Glycolated Water Suspensions of Functionalized Graphene Nanoplatelets
- Valles, Manel
- Theoretical and Experimental Study of NH3 Absorption Into Ammonia-Water Solution Using Polymeric Porous Membranes
- van den Broek, Martijn
- Organic Rankine Cycle Part-Load Characterization: Validated Models of an 11 kWe Waste Heat Recovery ORC
- Thermodynamic Screening of Organic Rankine Cycle Working Fluids and Architectures: Application to Automotive Internal Combustion Engines
- Van Wachem, Berend
- Hydrodynamic Characteristics of Harmonically Excited Thin-Film Flows: Experiments and Computations
- Vandadi, Aref
- Optimization of Superhydrophobic Surfaces Promoting Continuous Dropwise Condensation
- Varela Ballesta, Sylvana
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Vargas, Eduardo
- A Lock-In CCD Camera Based Method for Thermal Diffusivity Measurement by an Improved Photothermal Beam Deflection Slope Method
- Veloso, Maria
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Venetsanos, Alexandros
- CFD Modeling of Vapor Cloud Explosion, Cold BLEVE and Hot BLEVE in a Large Scale Tunnel
- Verdu, Gumersindo
- Thermal Hydraulic Simulation of the TRIGA IPR-R1 Research Reactor
- Vernet Peña, Anton
- The Interaction Between Two Spheres Falling in a Viscoelastic Fluid
- Vien, Kevin
- Laminar Burning Speed and Flame Structure of Syngas/Oxygen/Helium and Syngas/Air/EDG Premixed Flame
- Vierendeels, Jan
- Comparison Between Metal Foam and Finned Tube Heat Exchangers for HVAC Applications
- Vilarroig, Jose
- Analysis and Optimization of a Vertical Axis Wind Turbine Savonius-Type Panel Using CFD Techniques
- Vogel, Julian
- Numerical Modelling of High Temperature Latent Heat Storage
- Volkov, Konstantin
- Multi-scale Simulation of Two-Phase Flows in Energy Systems
- Vuong, Edward
- Modelling of an Air-Based BIPV/T with Heat Fins in EnergyPlus
- Wajs, Jan
- Experimental Investigation of Domestic Gas Boiler Fitted with ORC Module
- Wang, Gang
- The Numerical Simulation and Research on the Process Parameters of GaN-MOCVD Reactor Chamber
- The Research of ZnO - MOCVD Operating Environment and Experimental Verification
- Wang, Jing
- A Dynamic Control Model to Improve the Response Speed for an Air-condition System
- Wang, Linwei
- Numerical Study of Single Coal Particle Combustion in O2/N2 and O2/CO2 Atmospheres
- Wang, Tong
- LES Analysis on Cylinder Cascade Flow Based on Energy Ratio Coefficient
- Wang, Yiran
- The Investigation of CO2 Effect on the Characteristics of Methane Diffusion Flame
- Wang, Ziyu
- Laminar Burning Speed and Flame Structure of Syngas/Oxygen/Helium and Syngas/Air/EDG Premixed Flame
- Watanabe, Shogo
- Three-Dimensional Multi-physics Thermal-Analysis System for Electronic Systems
- Watson, Lucas
- A Review of Studies of Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions
- Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions by Agitated Heat Exchangers
- Weerasinghe, Rohitha
- Thermal Management of Downhole Measuring Tools Using Thermoelectric Cooling; A Numerical and Experimental Investigation
- Wei, Min
- Experimental Measurement of Flow Distribution in a Parallel Mini-channel Fluidic Network Using PIV Technique
- Numerical Study on the Improvement of Flow Distribution Uniformity Among Parallel Minichannels
- White, Alexander
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Thermodynamic Losses in a Gas Spring: Comparison of Experimental and Numerical Results
- Wibron, Emelie
- CFD Simulations Comparing Hard Floor and Raised Floor Configurations in an Air Cooled Data Center
- Willich, Caroline
- The Influence of Real Gases Effects on Thermal Losses in Reciprocating Piston-Cylinder Systems
- Wirtz, Siegmar
- Heat Transport Through the Active Layer of the Moving Bed in Rotary Drums
- Witte, Armin
- Modeling Heat Transfer and Skin Friction Frequency Responses of a Cylinder in Cross-Flow - a Unifying Perspective
- Wright, John
- Convective Heat Transfer in Hydrodynamically-Developed Laminar Flow in Asymmetrically Heated Annuli: A Three-Temperature Problem
- Wu, Yiyi
- Numerical Simulation and Analytical Models for Thin Film CdTe Layers Deposited by an Inline AP-MOCVD Process
- Wu, Yupeng
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Wu, Zan
- Numerical Simulation of Plate Heat Exchanger with Improved Mesh Performance
- Numerical Study on Enhanced Heat Transfer in a Tube with Conical-mesh Frustums Inserted
- Wu, Zhi
- A Novel Extremum Seeking Scheme for Closed-Loop Jet Control
- Xerri, Stefan
- Experimental Investigation on the Effects of Voltage on A Domestic Refrigerator
- Xiao, Jianjun
- Generalized Draining Film Model (DFM) Equation Set to Execute an Exact Numerical Solution
- Xiao, Manxuan
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Xu, Peng
- Numerical Study on the Thermal Performance of Earth-tube System in Ningbo, China
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Xu, Xianfan
- Ultrafast Spectroscopy of Thermal Transport and Energy Conversion
- Xu, Yunbo
- Study of Winglets Vortex Generators in A Circular Tube for Thermal Enhancement
- Xue, Shicheng
- The Impact of Capillary Instability and Furnace Operating Conditions on the Fabrication of Drawn Metamaterials
- Xue, Shulin
- Experimental Investigation on Heat Transfer Characteristics of High Blockage Ribs Channel
- Xuereb, Emilio
- Diesel Particulate Filter Loading and Regeneration Issues in City/Congested Driving
- Yagov, Victor
- Influence of Pressure on Film Boiling of Subcooled Liquid
- Yamada, Yutaka
- Experimental Study of Nanobubbles and Nanodroplets on Hydrophilic/Hydrophobic Combined Surfaces
- Yang, He
- A Novel Extremum Seeking Scheme for Closed-Loop Jet Control
- Yang, Qingzhen
- Study on Aerodynamic Performance in Turbomachines Based on Fluid-Structure Coupling Method
- Yang, Weihua
- Experimental Investigation on Heat Transfer Characteristics of High Blockage Ribs Channel
- Yang, Xiaogang
- Numerical Simulation and Analytical Models for Thin Film CdTe Layers Deposited by an Inline AP-MOCVD Process
- Yang, Zhiyin
- Numerical Study of Separated Boundary Layer Transition Under Adverse Pressure Gradient
- Yanuar, Yanuar
- Drag Reduction of a Spiral Pipe Flow by Nata De Coco Suspensions
- Yasa, Tolga
- A Test Bench for Gas Turbine Combustor Cooling Investigations
- Experimental Investigation of Effusion and Film Cooling for Gas Turbine Combustor
- Yavuz, Tahir
- Hydrodynamics Performance of the Twin Blade Hydrofoil Arrangement for Possible Applications of Wind and Hydrokinetic Turbines
- Yepes, Cesar
- Theoretical Modeling of a Cavitating Mooney-Rivlin Microshell, with Multiple Scale Analysis
- Yildiz, Sebiha
- Determination of the Vapor Bubble Diameter of FC3284, FC84 and Their Binary Mixtures During Pool Boiling
- Yoon, Byung-Ro
- Performance Evaluation of an Oil Leakage Monitoring System Using Ultrasonic Sensors
- Yoon, Youngchan
- Improvement of Thermal Efficiency of a Radial Heat Sink with a Surrounding Structure
- Thermal Performance of a Scaled-Up Louvered Fin Heat Exchanger with Unequal Louver Pitch
- Younsi, Mohand
- Numerical Simulation of the Unsteady Aerodynamics in an Axial Counter Rotating Fans Stage
- Yu, Xiaoli
- Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers
- Yu, Zhibin
- A Combined Organic Rankine Cycle-Heat Pump System for Domestic Hot Water Application
- Dynamic Organic Rankine Cycle with a Fixed Expansion Ratio Positive Displacement Expander
- Yuan, Li
- A Dynamic Control Model to Improve the Response Speed for an Air-condition System
- Yuce, Bahadir Erman
- Numerical Simulation of Thermal Flow and Comfort in an Office Room
- Yuksel, Ozhan
- Conceptual Design of a Hydroelectric Power Plant for a Rehabilitation Project
- Zabirov, Arslan
- Influence of Pressure on Film Boiling of Subcooled Liquid
- Zadrazil, Ivan
- An Investigation of Film Wavy Structure in Annular Flow Using Two Simultaneous LIF Approaches
- Investigation of Oil-Water Flow in Horizontal Pipes Using Simultaneous Two-Line Planar Laser-Induced Fluorescence and Particle Velocimetry
- Zakin, Jacques
- A Review of Studies of Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions
- Heat Transfer Enhancement in Turbulent Drag Reducing Surfactant Solutions by Agitated Heat Exchangers
- Zhang, Bin
- Fluorescence Temperature Measurement of Optical Cavitation
- Zhang, Xingxing
- Numerical Study on the Thermal Performance of Earth-tube System in Ningbo, China
- Parametric Study of a Novel Gravity Assisted Loop Heat Pipe (GALHP) with Composite Mesh-Screen Wick Structure
- Zhang, Yang
- Flame Colour Analysis for the Droplet Combustion of Water-in-diesel Emulsions
- Measuring the Temperature of a Flame Propagating Through a Quartz Tube Using High Speed Colour Imaging and Thin SiC Filament Based Two Colour Method
- Single Particle Motion Studies Using Stereo-Vision and Digital Image Processing
- The Investigation of CO2 Effect on the Characteristics of Methane Diffusion Flame
- The Investigation of Droplet Combustion Characteristics of Biodiesel-Diesel Blends Using High Speed Camera
- Zheng, Lukai
- Flame Colour Analysis for the Droplet Combustion of Water-in-diesel Emulsions
- Zheng, Wentian
- Numerical Simulation of CO2 Flows in Pipes with Phase Transition Across the Triple Point
- Zhou, Tongming
- Direct Numerical Simulation of Three-Dimensional Flow Past a Yawed Square Cylinder in Steady Current
- Simultaneous Measurements of Turbulent Energy and Temperature Dissipation Rates in the Far Field of a Slightly Heated Cylinder Wake
- Zhou, Yu
- A Novel Extremum Seeking Scheme for Closed-Loop Jet Control
- Zimmermann, Uwe
- Investigations on Fluid Dynamics of Hydraulic Accumulators
- Ziskind, Gennady
- An Analytical Technique of Transient PCM Melting Calculation for Different PCM Containers Cases