11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics: 20-23 July 2015

A B C D E F G H I J K L M N O P Q R S T U V W Y Ž

Abdul Baseer, Mohammed: Wind Resource Assessment for an Industrial City in Saudi Arabia
Adelaja, Adekunle: Experimental Investigation of Frictional Pressure Drop in Inclined Tubes; Experimental Studies of Heat Transfer Coefficient and Pressure Drop in Inclined Condensing Units
Adio, Saheed: Experimental Investigation on the Viscosity, Electrical Conductivity and pH of SiO2-Ethylene Glycol Nanofluids
Ahn, Sang Joon: Numerical Study of Pump-Jet Performance with a Ring Rotor Using an Unstructured Mesh Technique
Aifaa, Muhammad: Crystal Growth Behavior of Clathrate Hydrate in Flowing Liquid Water Saturated with Natural Gas
Ajayi, Arinola: Numerical Optimisation of Conjugate Hexagonal Cooling Channels with Internal Heat Generation Using Al2O3-Water Nanofluid
Åkesjö, Anders: New Measurement Approaches for Film Thickness and Wall Temperature in Falling Film Heat Exchangers
Al Shakhshir, Saher: Employing Hot Wire Anemometry to Directly Measure the Water Balance in a Proton Exchange Membrane Fuel Cell
Alam, Md.: Wind Resource Assessment for an Industrial City in Saudi Arabia
Alexeev, Nikolay: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Allou, Alexandre: Shock Wave Passage Through a Diphasic Medium
Ameel, Bernd: Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation
Amiroudine, Sakir: Boundary Layer Instabilities in Near-Critical Fluids; New Type of Instability Near Charged Selective Surface Caused by the Joule Heating
Antos, Pavel: Flat Plate Boundary Layer Under Negative Pressure Gradient
Aprin, Laurent: Pool Evaporation of Hazardous Substances in Industrial Storage Dikes: a Study on Spatial and Temporal Temperature Variations and Its Consequences
Arabacı, Seda: Aerodynamically Efficient Bus Designs Inspired by Beluga Whales
Astashov, Alexey: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Aybar, Hikmet: Nanofluids; Opportunities and Challenges
Badreddine, Hassan: Application of the Turbulence-Resolving Finite-Size Lagrangian Method to a Bubble Column Reactor
Baelmans, Martine: Improvements in Heat Transfer Network Modelling for Oil-Cooled Power Transformer Windings
Bala Yabo, Isah: Combined Effects of Thermal-diffusion and Thermal Radiation on Transient MHD Natural Convection Flow in a Vertical Channel
Balachandar, Ram: The Application of Jet Impingement for Piston Cooling
Baloyi, Jeffrey: Optimum Diameter of a Circulating Fluidised Bed Combustor with Negative Wall Heat Flux
Banda, Emmanuel: Effect of Wood Moisture Content and Log Diameter on Conversion Efficiency of a Drum Kiln
Barron, Ronald: The Application of Jet Impingement for Piston Cooling
Bartsoen, Tom: Effect of Nozzle Geometry on the Efficiency of Compressed Air Nozzles
Batagelj, Valentin: The Influence of the Resistor Temperature Coefficient to the Uncertainty of the Temperature Measurement
Bello-Ochende, Tunde: Optimal Configuration and Thermal Performance of Heated Rectangular Blocks Under Forced Convection with Volume Constraints; Optimum Diameter of a Circulating Fluidised Bed Combustor with Negative Wall Heat Flux
Berning, Torsten: A Study of Thermal Effects in a Proton Exchange Membrane Fuel Cell with a Two-Fluid Model; Employing Hot Wire Anemometry to Directly Measure the Water Balance in a Proton Exchange Membrane Fuel Cell
Beyrau, Frank: Characterisation of Second Generation Alternative Diesel Fuel Sprays
Beysens, Daniel: Boundary Layer Instabilities in Near-Critical Fluids
Bhatt, Bhushan: Linear Stability Boundary for Simulated Oscillatory Flow Phenomena in Vertical Condensing Flows
Billiet, Marijn: Experimental Investigation of the Effects of Foam Height, Emissivity and Orientation on Buoyancy-Driven Convection in Open-Cell Aluminium Foam
Bojkovski, Jovan: The Influence of the Resistor Temperature Coefficient to the Uncertainty of the Temperature Measurement
Bombek, Gorazd: Phase-locked Averaging of Velocity Fields Within an Axial Fan Operating Under Rotating Stall Conditions
Bondhu, Mahesh: Development of Vapour Compression Refrigeration System Test Rig and Evaluation of Test Data for R134a Condensation in Compact Heat Exchangers with Serrated Fin
Borich, Anna: Shock Wave Passage Through a Diphasic Medium
Bortolin, Stefano: Effects of Geometry and Fluid Properties During Condensation in Minichannels: Experiments and Simulations
Bošković-Vragolović, Nevenka: Analogy Between Momentum and Heat Transfer in Vertical Liquid-Solid Flow
Bronchart, Filip: A New Approach for Efficient Dehumidification
Brou, Stanislas: Modal Reduction of Latent Heat Storage Unit
Buchlin, Jean-Marie: Temperature Measurements in a Multiphase Fluid Hammer
Bui, Rung: A Dynamic Process Model for a Sidewell Furnace
Busse, Lawrence: Non-Intrusive Heat Flux Measurements Using Ultrasound
Capitani, Ryan: Experimental Study on Cavity Flow Natural Convection in Porous Medium, Saturated with Al203 60% EG-40% Water Nanofluid
Carvalho, Esdras: Dynamic Simulation of Tubular Heat Exchangers
Chabicovsky, Martin: Heat Treatment of Long Products
Charette, Andre: A Dynamic Process Model for a Sidewell Furnace
Charogiannis, Alexandros: A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows
Chen, Luming: CFD Simulation of the Hydrodynamics and Reaction Kinetics of Chemical Looping Combustion Process in a Fuel Reactor
Chen, Min: A New Method for Simulating the Convective Heat Transfer of Subcritical and Supercritical Fluids in Nanochannels
Chennu, Ranganayakulu: Development of Vapour Compression Refrigeration System Test Rig and Evaluation of Test Data for R134a Condensation in Compact Heat Exchangers with Serrated Fin
Cho, Hyoung-Kyu: Experimental and Numerical Investigation on Cross Flow in the PMR200 Core; Experimental Study on the Measurement of Effective Thermal Conductivity for VHTR Fuel Block Geometry
Coddé, Joris: Improvements in Heat Transfer Network Modelling for Oil-Cooled Power Transformer Windings
Coelho, Leandro: Optimization of Shell-And-Tube Heat Exchangers Using Wind Driven Technique
Coelho, Pedro: Solution of Radiative Heat Transfer Problems Using the Spherical Harmonics Discrete Ordinates Method
Coletti, Francesco: Impact of Crude Oil Fouling Composition on the Thermo-Hydraulic Performance of Refinery Heat Exchangers
Combrinck, Madeleine: Eulerian Derivation of Non-Inertial Navier-Stokes Equations for Compressible Flow in Constant, Pure Rotation
Costa, Caliane: A Sequential Approach for the Synthesis of Flexible Heat Exchanger Networks
Croce, Giulio: Heat Transfer in Rough Microchannels Under Rarefied Flow Conditions
D, Avinash: Effect of Axial Wall Conduction and Ambient Heat-in-Leak on the Performance of a Two Fluid Counter-Flow Cryogenic Heat Exchanger, Using Finite Element Method
Dala, Laurent: Eulerian Derivation of Non-Inertial Navier-Stokes Equations for Compressible Flow in Constant, Pure Rotation
Das, Arup: Numerical Analysis of Film Boiling Around Horizontal Cylindrical Surfaces
Das, Prasanjit: Fluid Flow Characteristics on Scale Deposition in a Concentric Reducer Using CFD Approach
De Jaeger, Peter: Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation
De Kerpel, Kathleen: Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation; Effect of a Sharp Return Bend on Two-Phase Refrigerant Flow Void Fraction; Ice Fraction Estimation for Ice Slurries Through Impedance Measurements; Measured Void Fraction and Heat Transfer Coefficients During Condensation; Small Diameter Fibres as New Wick Material for Capillary-driven Heat Pipes
De Paepe, Michel: A New Approach for Efficient Dehumidification; Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation; Design Sensitivity Analysis of Using Various In-Tube Condensation Correlations for an Air-Cooled Direct Condenser for ORCs; Effect of a Sharp Return Bend on Two-Phase Refrigerant Flow Void Fraction; Experimental Investigation of the Effects of Foam Height, Emissivity and Orientation on Buoyancy-Driven Convection in Open-Cell Aluminium Foam; Ice Fraction Estimation for Ice Slurries Through Impedance Measurements; Measured Void Fraction and Heat Transfer Coefficients During Condensation; Small Diameter Fibres as New Wick Material for Capillary-driven Heat Pipes; Supercritical Heat Transfer and Heat Exchanger Design for Organic Rankine Cycle Application; Techno-thermodynamic Multi-objective Optimization of Organic Rankine Cycles for Waste Heat Recovery
De Paul, Irene: Flow Visualization and Thermal Measurements on Pulsating Gravity Assisted Heat Pipes
De Roeck, Wim: Experimental Study of the Valve-bend Interaction in an Aircraft ECS-system
De Schampheleire, Sven: Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation; Effect of a Sharp Return Bend on Two-Phase Refrigerant Flow Void Fraction; Experimental Investigation of the Effects of Foam Height, Emissivity and Orientation on Buoyancy-Driven Convection in Open-Cell Aluminium Foam; Small Diameter Fibres as New Wick Material for Capillary-driven Heat Pipes
Deep, Akash: Numerical Analysis of Film Boiling Around Horizontal Cylindrical Surfaces
Degani, David: Fluid-Structure Interaction of a Free-to-Roll Slender Body of Revolution At High Angles of Attack
Del Col, Davide: Effects of Geometry and Fluid Properties During Condensation in Minichannels: Experiments and Simulations
Del Giudice, Stefano: Annular Ducts: Nusselt Number Correlations for Laminar Flows of Liquids with Temperature Dependent Properties
Demekhin, Evgeny: New Type of Instability Near Charged Selective Surface Caused by the Joule Heating
Demeyer, Peter: A New Approach for Efficient Dehumidification
Demuren, Ayodeji: Occlusion of Insulin Delivery Due to Bubble Formation in Infusion Pump Therapy; Proper Orthogonal Decomposition of Flow Around a Large Mining Truck
Denayer, Hervé: Experimental Study of the Valve-bend Interaction in an Aircraft ECS-system
Denner, Fabian: A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows
Deruyter, Thomas: Small Diameter Fibres as New Wick Material for Capillary-driven Heat Pipes
Desmet, Wim: Experimental Study of the Valve-bend Interaction in an Aircraft ECS-system
Diawara, Norou: Occlusion of Insulin Delivery Due to Bubble Formation in Infusion Pump Therapy
Diaz-Bejarano, Emilio: Impact of Crude Oil Fouling Composition on the Thermo-Hydraulic Performance of Refinery Heat Exchangers
Dirker, Jaco: Experimental Investigation of Frictional Pressure Drop in Inclined Tubes; Experimental Studies of Heat Transfer Coefficient and Pressure Drop in Inclined Condensing Units; Heat Transfer and Pressure Drop Characteristics of a Horizontal Annular Passage in the Transitional Flow Regime
Domnick, Joachim: Application of the VOF Methodology for the Analysis of Transient Shear Rates in Droplet-Wall Interaction
Dragomirov, Plamen: Characterisation of Second Generation Alternative Diesel Fuel Sprays
Drnovsek, Janko: The Influence of the Resistor Temperature Coefficient to the Uncertainty of the Temperature Measurement
Duan, Fei: Hydrothermal Waves in Droplet Evaporation
Dutta, Viresh: Thermodynamic Rating of an Energy Efficient Chiller Cum Heater for Metal Hydride Storage in Hybrid Photovoltaic -Fuel Cell (PV/FC) System
Dyer, David: A Novel Ocean Thermal Energy Conversion Plant
Ekeberg, Ina: A Study of Heat Exchange Through an Helico-Axial Rotor of a Multiphase Pump
Ekins-Daukes, Nicholas: A Coupled Thermal and Electrical Model of a Sheet-And-Tube Hybrid photovoltaic/thermal (PV/T) Collector
EL Khoury, Roch: Coupled Multi-solver Methodology and Application to a Large Scale Industrial Furnace ACE
El-Dessouky, H: Characteristics of Novel Polymer Composite Heat Transfer Tubes
El-Dessouky, Hisham: Trends in Thermal Desalination Processes
Fasel, Hermann: Numerical and Experimental Investigation of a Solar Chimney Power Plant Model
Favrat, Daniel: Exergy Representations in Thermodynamics
Fike, Matej: Phase-locked Averaging of Velocity Fields Within an Axial Fan Operating Under Rotating Stall Conditions
Forestier, Serge: Pool Evaporation of Hazardous Substances in Industrial Storage Dikes: a Study on Spatial and Temporal Temperature Variations and Its Consequences
Ganchenko, Georgy: New Type of Instability Near Charged Selective Surface Caused by the Joule Heating
Garbadeen, Ibrahim: Numerical Study on Natural Convection Flow in MWCNT Nanofluid-filled Square Enclosure Based on Experimental Conductivity and Viscosity Model
Garić-Grulović, Radmila: Analogy Between Momentum and Heat Transfer in Vertical Liquid-Solid Flow
Garrabos, Yves: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Ghannam, Boutros: Coupled Multi-solver Methodology and Application to a Large Scale Industrial Furnace ACE
Ghodsinezhad, Hadi: Boundary Condition Investigation for Cavity Flow Natural Convection; Experimental Study on Cavity Flow Natural Convection in Porous Medium, Saturated with Al203 60% EG-40% Water Nanofluid; Investigation on Ultrasonicaton Energy Density Effect on Size Distribution of Zinc Oxide (ZnO) Nanoparticles by Using Zeta-Sizer
Gottlieb, Oded: Fluid-Structure Interaction of a Free-to-Roll Slender Body of Revolution At High Angles of Attack
Gourdon, Mathias: New Measurement Approaches for Film Thickness and Wall Temperature in Falling Film Heat Exchangers
Granate, Pedro: Solution of Radiative Heat Transfer Problems Using the Spherical Harmonics Discrete Ordinates Method
Grbavčić, Željko: Analogy Between Momentum and Heat Transfer in Vertical Liquid-Solid Flow
Grobler, Carla: Experimental Study on Cavity Flow Natural Convection in Porous Medium, Saturated with Al203 60% EG-40% Water Nanofluid
Guarracino, Ilaria: A Coupled Thermal and Electrical Model of a Sheet-And-Tube Hybrid photovoltaic/thermal (PV/T) Collector
Guillaument, Romain: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Gutheil, Eva: Transported Joint PDF Modeling of Non-reacting and Reacting Turbulent Spray Flows
Gyuricsko, Eric: Occlusion of Insulin Delivery Due to Bubble Formation in Infusion Pump Therapy
Haslam, Andrew: A Two-Phase Single-Reciprocating-Piston Heat Conversion Engine
Hassan, Nur: Modelling of Baffles in Electrostatic Precipitator (ESP) to Achieve Optimum Flow Distribution
Haustein, Herman: Modular Prediction of Heat Transfer Under Free-Jets: Single Jet, Jet Array, and the Influence of Gravity
Hegde, Pradeep: Effect of Ambient Heat-In-Leak and Longitudinal Wall Conduction on a Three-Fluid, Parallel-Flow Cryogenic Heat Exchanger
Herz, Fabian: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Heymes, Frederic: Pool Evaporation of Hazardous Substances in Industrial Storage Dikes: a Study on Spatial and Temporal Temperature Variations and Its Consequences
Hildenbrand, Stefan: Application of the VOF Methodology for the Analysis of Transient Shear Rates in Droplet-Wall Interaction
Ho, Ai Wei: Hydrothermal Waves in Droplet Evaporation
Hochsteiner de Vasconcelos Segundo, Emerson: Optimization of Shell-And-Tube Heat Exchangers Using Wind Driven Technique
Horsky, Jaroslav: Heat Treatment of Long Products
Hoyos, Daniel: Flow Visualization and Thermal Measurements on Pulsating Gravity Assisted Heat Pipes
Hribernik, Ales: Phase-locked Averaging of Velocity Fields Within an Axial Fan Operating Under Rotating Stall Conditions
Hrnjak, Pega: Reversing Flow in Microchannel Evaporators
Hu, Yong: Transported Joint PDF Modeling of Non-reacting and Reacting Turbulent Spray Flows
Huang, Rui: The Three Dimensional Simulating Study of the Flow and Heat Transfer in Detached Vehicular Cooling-Compartment
Huang, Yuqi: The Three Dimensional Simulating Study of the Flow and Heat Transfer in Detached Vehicular Cooling-Compartment
Huisseune, Henk: Applying the Volume Averaging Theory to Open-cell Metal Foam in Natural Convection/Radiation; Experimental Investigation of the Effects of Foam Height, Emissivity and Orientation on Buoyancy-Driven Convection in Open-Cell Aluminium Foam; Supercritical Heat Transfer and Heat Exchanger Design for Organic Rankine Cycle Application
Hussain, Nabeel: Employing Hot Wire Anemometry to Directly Measure the Water Balance in a Proton Exchange Membrane Fuel Cell
Ibarra, Roberto: Towards A Universal Dimensionless Map of Flow Regime Transitions in Horizontal Liquid-Liquid Flows
Imasato, Kazuki: Crystal Growth Behavior of Clathrate Hydrate in Flowing Liquid Water Saturated with Natural Gas
Isa, Sani: Unsteady Hartmann Two- Phase Flow: The Semi-analytical Approach
Jaćimovski, Darko: Analogy Between Momentum and Heat Transfer in Vertical Liquid-Solid Flow
Jayanti, Sreenivas: Comparative Experimental Study of Air-water Vertical Annular Flow Through Expansion and Contraction Sections
Jeong, Ji Hwan: Flow Regime of Downward Air-Water Two-Phase Flow in a Vertical Narrow Rectangular Channel
Jha, Basant: Combined Effects of Thermal-diffusion and Thermal Radiation on Transient MHD Natural Convection Flow in a Vertical Channel; Unsteady Hartmann Two- Phase Flow: The Semi-analytical Approach
Joly, Frédéric: Modal Reduction of Latent Heat Storage Unit
Jonáš, Pavel: Flat Plate Boundary Layer Under Negative Pressure Gradient
Kaban'kov, Oleg: Heat Transfer and Hydrodynamics At Natural Circulation of Single and Two-phase Media in Channels with Different Cross-section Configuration
Kalendar, Abdulrahim: A Numerical Study of Natural Convective Heat Transfer From a Pair of Adjacent Horizontal Isothermal Square Elements Embedded in an Adiabatic Surface – Effect of Element Spacing on Heat Transfer Rate
Kalliadasis, Serafim: A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows
Karakoc, Hikmet: Sensitive Approach to Exergy Analysis of Chemically Reacting Systems: Combustion Gas Evaluation
Kaya, Alihan: Design Sensitivity Analysis of Using Various In-Tube Condensation Correlations for an Air-Cooled Direct Condenser for ORCs; Supercritical Heat Transfer and Heat Exchanger Design for Organic Rankine Cycle Application
Kaya, Nevzat: Sensitive Approach to Exergy Analysis of Chemically Reacting Systems: Combustion Gas Evaluation
Khan, M. Masud: Fluid Flow Characteristics on Scale Deposition in a Concentric Reducer Using CFD Approach; Modelling of Baffles in Electrostatic Precipitator (ESP) to Achieve Optimum Flow Distribution
Khasmatulina, Natalya: New Type of Instability Near Charged Selective Surface Caused by the Joule Heating
Khoury, Khalil: Coupled Multi-solver Methodology and Application to a Large Scale Industrial Furnace ACE
Kim, Hyo Tae: Fabrication of High Thermal Conductivity Ceramics and Hybrid Materials for Power Electronics and Integrated Packages
Kim, Kwang-Yong: Effects of Geometric Configuration on Performance of a Solar Air Heater
Kim, Tae Hyeon: Flow Regime of Downward Air-Water Two-Phase Flow in a Vertical Narrow Rectangular Channel
Kinkelin, Christophe: Experimental Study of a Hybrid CNT/PCM Structure for the Transient Thermal Management of Electronics
Kirmse, Christoph: A Two-Phase Single-Reciprocating-Piston Heat Conversion Engine
Kocaefe, Duygu: A Novel High Temperature Heat Treatment Process for Wood
Kocaefe, Yasar: A Dynamic Process Model for a Sidewell Furnace; A Novel High Temperature Heat Treatment Process for Wood
Kolesnikov, Andrei: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Komossa, Hendrik: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Kruger, Sunita: The Effect of Geometrical Electrical Cable Configurations on Heat Transfer in Cable Ducts
Kukulka, David: Comparison of the Evaporation and Condensation Heat Transfer Coefficients on the Outside of Smooth, Micro Fin and Vipertex 1EHT Enhanced Heat Transfer Tubes; Numerical Study on Energy Consumption Characteristics for Different Wall Structures and Different Thickness of Thermal Insulation Layer Based on the Intermittent Energy Use Characteristics
Kulkani, Kishor: Effects of Geometric Configuration on Performance of a Solar Air Heater
Kumar, Kuldeep: Thermodynamic Rating of an Energy Efficient Chiller Cum Heater for Metal Hydride Storage in Hybrid Photovoltaic -Fuel Cell (PV/FC) System
KV, Ramana Murthy: Development of Vapour Compression Refrigeration System Test Rig and Evaluation of Test Data for R134a Condensation in Compact Heat Exchangers with Serrated Fin
Kwon, Oh Joon: Numerical Study of Pump-Jet Performance with a Ring Rotor Using an Unstructured Mesh Technique
Lazova, Marija: Design Sensitivity Analysis of Using Various In-Tube Condensation Correlations for an Air-Cooled Direct Condenser for ORCs; Supercritical Heat Transfer and Heat Exchanger Design for Organic Rankine Cycle Application
Lecompte, Steven: Techno-thermodynamic Multi-objective Optimization of Organic Rankine Cycles for Waste Heat Recovery
Lecoutre, Carole: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Lee, Jeong-Hun: Experimental and Numerical Investigation on Cross Flow in the PMR200 Core
Lefevre, Frederic: Experimental Study of a Hybrid CNT/PCM Structure for the Transient Thermal Management of Electronics
Leksin, Maxim: Study of Heat Transfer Mechanisms in Quenching Process
Lema, Marcos: Temperature Measurements in a Multiphase Fluid Hammer
Li, Wei: Comparison of the Evaporation and Condensation Heat Transfer Coefficients on the Outside of Smooth, Micro Fin and Vipertex 1EHT Enhanced Heat Transfer Tubes; Numerical Study on Energy Consumption Characteristics for Different Wall Structures and Different Thickness of Thermal Insulation Layer Based on the Intermittent Energy Use Characteristics
Li, Xia: CFD Simulation of the Hydrodynamics and Reaction Kinetics of Chemical Looping Combustion Process in a Fuel Reactor
Lipatov, Igor: Eulerian Derivation of Non-Inertial Navier-Stokes Equations for Compressible Flow in Constant, Pure Rotation
Lipperheide, Moritz: Optimization of Reactor Temperature According to Radiation Distribution Characteristics
Lips, Stephane: Experimental Study of a Hybrid CNT/PCM Structure for the Transient Thermal Management of Electronics; Recent Progress and Challenges in Heat Pipe Science
Liu, Zhentao: The Three Dimensional Simulating Study of the Flow and Heat Transfer in Detached Vehicular Cooling-Compartment
Lopes, Marcos: Optimization of Shell-And-Tube Heat Exchangers Using Wind Driven Technique; Study of Ceiling Deflector Application in a Poultry House
Lopez Peña, Fernando: Temperature Measurements in a Multiphase Fluid Hammer
Ludwig, Markus: Application of the VOF Methodology for the Analysis of Transient Shear Rates in Droplet-Wall Interaction
Lukisha, Anatoly: 1570086065: Calculation of Thermo-Hydraulic Effectiveness of Porous Cylindrical Evaporators At Laminar Regime Flow and Under Boundary Conditions of the First Kind
Luwaya, Edwin: Effect of Wood Moisture Content and Log Diameter on Conversion Efficiency of a Drum Kiln
Macchietto, Sandro: Impact of Crude Oil Fouling Composition on the Thermo-Hydraulic Performance of Refinery Heat Exchangers
Mahdavi, Mostafa: Boundary Condition Investigation for Cavity Flow Natural Convection
Maleki, Erfan: Numerical Study of External Air Flow Over Stationary and Rotating Pipe with Elliptical Cross-Section
Malfait, Lieven: Effect of Nozzle Geometry on the Efficiency of Compressed Air Nozzles
Mano, Thiago: Dynamic Simulation of Tubular Heat Exchangers
Marechal, Francois: Exergy Representations in Thermodynamics
Mariani, Viviana: Optimization of Shell-And-Tube Heat Exchangers Using Wind Driven Technique; Study of Ceiling Deflector Application in a Poultry House
Markides, Christos: A Coupled Thermal and Electrical Model of a Sheet-And-Tube Hybrid photovoltaic/thermal (PV/T) Collector; A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows; A Two-Phase Single-Reciprocating-Piston Heat Conversion Engine; Effect of Working-Fluid Mixtures on Organic Rankine Cycle System Performance: Heat Transfer and Cost Analysis; Towards A Universal Dimensionless Map of Flow Regime Transitions in Horizontal Liquid-Liquid Flows
Marre, Samuel: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Martins, Jean-Paul: An Investigation of Produce Cooling Tunnel Performance
Martins, Lauber: Numerical Optimisation of Conjugate Hexagonal Cooling Channels with Internal Heat Generation Using Al2O3-Water Nanofluid
Matar, Omar: Towards A Universal Dimensionless Map of Flow Regime Transitions in Horizontal Liquid-Liquid Flows
Matsunaga, Takuya: Application of Subgrid Stress Model to Volumetric PIV Results for Estimation of Turbulence Dissipation Rate in a Stirred Mixer
Mehrali, Mehdi: Entropy Generation and Convective Heat Transfer of Graphene Nanoplatelets Nanofluid for Laminar Forced Convection Flow
Mehrali, Mohammad: Entropy Generation and Convective Heat Transfer of Graphene Nanoplatelets Nanofluid for Laminar Forced Convection Flow
Mendonça, Kátia: Study of Ceiling Deflector Application in a Poultry House
Metselaar, Hendrik: Entropy Generation and Convective Heat Transfer of Graphene Nanoplatelets Nanofluid for Laminar Forced Convection Flow
Meyer, Josua: Boundary Condition Investigation for Cavity Flow Natural Convection; Experimental Investigation of Frictional Pressure Drop in Inclined Tubes; Experimental Investigation on the Viscosity, Electrical Conductivity and pH of SiO2-Ethylene Glycol Nanofluids; Experimental Studies of Heat Transfer Coefficient and Pressure Drop in Inclined Condensing Units; Experimental Study on Cavity Flow Natural Convection in Porous Medium, Saturated with Al203 60% EG-40% Water Nanofluid; Heat Transfer and Pressure Drop Characteristics of a Horizontal Annular Passage in the Transitional Flow Regime; Investigation on Ultrasonicaton Energy Density Effect on Size Distribution of Zinc Oxide (ZnO) Nanoparticles by Using Zeta-Sizer; Measured Void Fraction and Heat Transfer Coefficients During Condensation; Nanofluids; Opportunities and Challenges; Numerical Optimisation of Conjugate Hexagonal Cooling Channels with Internal Heat Generation Using Al2O3-Water Nanofluid; Numerical Study on Natural Convection Flow in MWCNT Nanofluid-filled Square Enclosure Based on Experimental Conductivity and Viscosity Model; Optimal Configuration and Thermal Performance of Heated Rectangular Blocks Under Forced Convection with Volume Constraints; Optimum Diameter of a Circulating Fluidised Bed Combustor with Negative Wall Heat Flux; Wind Resource Assessment for an Industrial City in Saudi Arabia
Miranda, Camila: A Sequential Approach for the Synthesis of Flexible Heat Exchanger Networks
Moita, Ana: Effect of Wettability on Nucleate Boiling
Morais, Sandy: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Moreira, Antonio: Effect of Wettability on Nucleate Boiling
Moses, Dirk: Characteristics of Novel Polymer Composite Heat Transfer Tubes
Msimuko, Stanely: Effect of Wood Moisture Content and Log Diameter on Conversion Efficiency of a Drum Kiln
Mueller, Patrick: Characteristics of Novel Polymer Composite Heat Transfer Tubes
Mujanayi, Katumba: Optimal Configuration and Thermal Performance of Heated Rectangular Blocks Under Forced Convection with Volume Constraints
Mukanda, Moses: Effect of Wood Moisture Content and Log Diameter on Conversion Efficiency of a Drum Kiln
N, Chiranth: Effect of Axial Wall Conduction and Ambient Heat-in-Leak on the Performance of a Two Fluid Counter-Flow Cryogenic Heat Exchanger, Using Finite Element Method
Nafsun, Aainaa Izyan: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Nasif, Gus: The Application of Jet Impingement for Piston Cooling
Ndenguma, Dickson: Heat Transfer and Pressure Drop Characteristics of a Horizontal Annular Passage in the Transitional Flow Regime
Nemer, Maroun: Coupled Multi-solver Methodology and Application to a Large Scale Industrial Furnace ACE
Neveu, Alain: Modal Reduction of Latent Heat Storage Unit
Niceno, Bojan: Application of the Turbulence-Resolving Finite-Size Lagrangian Method to a Bubble Column Reactor
Nishino, Koichi: Application of Subgrid Stress Model to Volumetric PIV Results for Estimation of Turbulence Dissipation Rate in a Stirred Mixer
Niu, Yu-Zhen: Comparison of the Evaporation and Condensation Heat Transfer Coefficients on the Outside of Smooth, Micro Fin and Vipertex 1EHT Enhanced Heat Transfer Tubes; Numerical Study on Energy Consumption Characteristics for Different Wall Structures and Different Thickness of Thermal Insulation Layer Based on the Intermittent Energy Use Characteristics
Nonino, Carlo: Annular Ducts: Nusselt Number Correlations for Laminar Flows of Liquids with Temperature Dependent Properties
Obayopo, Surajudeen: Numerical Optimisation of Conjugate Hexagonal Cooling Channels with Internal Heat Generation Using Al2O3-Water Nanofluid
Ocak, Buesra: Application of the VOF Methodology for the Analysis of Transient Shear Rates in Droplet-Wall Interaction
Ohfuka, Yugo: Performance of Hydrate-Based Engine for Ocean Thermal Energy Conversion System
Ohmura, Ryo: Crystal Growth Behavior of Clathrate Hydrate in Flowing Liquid Water Saturated with Natural Gas; Performance of Hydrate-Based Engine for Ocean Thermal Energy Conversion System
Olakoyejo, Olabode: Numerical Optimisation of Conjugate Hexagonal Cooling Channels with Internal Heat Generation Using Al2O3-Water Nanofluid
Olausson, Lars: New Measurement Approaches for Film Thickness and Wall Temperature in Falling Film Heat Exchangers
Olguin, Hernan: Transported Joint PDF Modeling of Non-reacting and Reacting Turbulent Spray Flows
Olivier, Stefan: Measured Void Fraction and Heat Transfer Coefficients During Condensation
Oosthuizen, Patrick: A Numerical Study of Natural Convective Heat Transfer From a Horizontal Isothermal Square Element with an Unheated Square Adiabatic Inner Section; A Numerical Study of Natural Convective Heat Transfer From a Pair of Adjacent Horizontal Isothermal Square Elements Embedded in an Adiabatic Surface – Effect of Element Spacing on Heat Transfer Rate; Mixed Convective Heat Transfer in Situations Involving Laminar, Transitional, and Turbulent Flow
Orth, Thomas: Characteristics of Novel Polymer Composite Heat Transfer Tubes
Ouazzani, Jalil: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Oumarou, Noura: A Novel High Temperature Heat Treatment Process for Wood
Oyewunmi, Oyeniyi: A Two-Phase Single-Reciprocating-Piston Heat Conversion Engine; Effect of Working-Fluid Mixtures on Organic Rankine Cycle System Performance: Heat Transfer and Cost Analysis
Ozalp, Nesrin: Optimization of Reactor Temperature According to Radiation Distribution Characteristics
Pagnier, Philippe: A Study of Heat Exchange Through an Helico-Axial Rotor of a Multiphase Pump
Pakdemirli, Mehmet: Aerodynamically Efficient Bus Designs Inspired by Beluga Whales
Pallares, Jordi: Numerical Simulations of the Deposition of Magnetic Beads on the Walls of Microchannels
Park, Goon-Cherl: Experimental and Numerical Investigation on Cross Flow in the PMR200 Core; Experimental Study on the Measurement of Effective Thermal Conductivity for VHTR Fuel Block Geometry
Patel, Vivek: Effect of Preheating on the Flow Characteristics of Swirling Multicoaxial Jets in an Expanded Confinement
Piera, Rodrigo: Flow Visualization and Thermal Measurements on Pulsating Gravity Assisted Heat Pipes
Pjanović, Rada: Analogy Between Momentum and Heat Transfer in Vertical Liquid-Solid Flow
Polyakov, Sergey: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Pradas, Marc: A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows
Prasser, Horst-Michael: Application of the Turbulence-Resolving Finite-Size Lagrangian Method to a Bubble Column Reactor
Prata, Alvaro: Dimensionless Parameters for a Free Piston Stirling Refrigerator
Pretorius, Leon: The Effect of Geometrical Electrical Cable Configurations on Heat Transfer in Cable Ducts
Prochazka, Pavel: Flat Plate Boundary Layer Under Negative Pressure Gradient; On the Influence of Plasma DBD Actuator in Streamwise Orientation Inside a Narrow Channel
Pusnik, Igor: New Concept of a Passive House – From Design to Realization
Qian, Xiaoqian: Numerical Study on Energy Consumption Characteristics for Different Wall Structures and Different Thickness of Thermal Insulation Layer Based on the Intermittent Energy Use Characteristics
Racke, Reinhard: Heat Conduction in Elastic Systems: Fourier Versus Cattaneo
Rakshit, Dibakar: Thermodynamic Rating of an Energy Efficient Chiller Cum Heater for Metal Hydride Storage in Hybrid Photovoltaic -Fuel Cell (PV/FC) System
Rambaud, Patrick: Temperature Measurements in a Multiphase Fluid Hammer
Rankin, Gary: An Investigation of Produce Cooling Tunnel Performance
Rasekh, Alireza: A Study of Convective Heat Transfer in a Rotor-Stator System of Disk-type Electrical Machines
Rasul, Mohammad: Fluid Flow Characteristics on Scale Deposition in a Concentric Reducer Using CFD Approach; Modelling of Baffles in Electrostatic Precipitator (ESP) to Achieve Optimum Flow Distribution
Raudensky, Miroslav: Heat Treatment of Long Products
Ravagnani, Mauro: A Sequential Approach for the Synthesis of Flexible Heat Exchanger Networks; Dynamic Simulation of Tubular Heat Exchangers
Rehman, Shafiqur: Wind Resource Assessment for an Industrial City in Saudi Arabia
Remiasz, Jacek: Non-Intrusive Heat Flux Measurements Using Ultrasound
Roesler, Stefan: Application of the VOF Methodology for the Analysis of Transient Shear Rates in Droplet-Wall Interaction
Roger, Maxime: Solution of Radiative Heat Transfer Problems Using the Spherical Harmonics Discrete Ordinates Method
Rolfes, Heidi: Investigation on Ultrasonicaton Energy Density Effect on Size Distribution of Zinc Oxide (ZnO) Nanoparticles by Using Zeta-Sizer
Rovenskaya, Olga: Heat Transfer in Rough Microchannels Under Rarefied Flow Conditions
S, Anupriya: Comparative Experimental Study of Air-water Vertical Annular Flow Through Expansion and Contraction Sections
Sadeghinezhad, Emad: Entropy Generation and Convective Heat Transfer of Graphene Nanoplatelets Nanofluid for Laminar Forced Convection Flow
Sadrhosseini, Hani: Numerical Study of External Air Flow Over Stationary and Rotating Pipe with Elliptical Cross-Section
Saha, Suvash: Fluid Flow Characteristics on Scale Deposition in a Concentric Reducer Using CFD Approach
Samokhin, Andrey: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Sauerhering, Jörg: Characterisation of Second Generation Alternative Diesel Fuel Sprays
Savino, Stefano: Annular Ducts: Nusselt Number Correlations for Laminar Flows of Liquids with Temperature Dependent Properties
Sayem, Abu: Modelling of Baffles in Electrostatic Precipitator (ESP) to Achieve Optimum Flow Distribution
Scherer, Viktor: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Schmidt, Jürgen: Characterisation of Second Generation Alternative Diesel Fuel Sprays
Seetharamu, Kankanhalli: Effect of Ambient Heat-In-Leak and Longitudinal Wall Conduction on a Three-Fluid, Parallel-Flow Cryogenic Heat Exchanger; Effect of Axial Wall Conduction and Ambient Heat-in-Leak on the Performance of a Two Fluid Counter-Flow Cryogenic Heat Exchanger, Using Finite Element Method
Sergeant, Peter: A Study of Convective Heat Transfer in a Rotor-Stator System of Disk-type Electrical Machines
Seshadri, V: Effect of Preheating on the Flow Characteristics of Swirling Multicoaxial Jets in an Expanded Confinement
Sexton, Wayne: Proper Orthogonal Decomposition of Flow Around a Large Mining Truck
Sharifpur, Mohsen: Boundary Condition Investigation for Cavity Flow Natural Convection; Experimental Investigation on the Viscosity, Electrical Conductivity and pH of SiO2-Ethylene Glycol Nanofluids; Experimental Study on Cavity Flow Natural Convection in Porous Medium, Saturated with Al203 60% EG-40% Water Nanofluid; Investigation on Ultrasonicaton Energy Density Effect on Size Distribution of Zinc Oxide (ZnO) Nanoparticles by Using Zeta-Sizer; Nanofluids; Opportunities and Challenges; Numerical Study on Natural Convection Flow in MWCNT Nanofluid-filled Square Enclosure Based on Experimental Conductivity and Viscosity Model
Shekhar, Chandra: Application of Subgrid Stress Model to Volumetric PIV Results for Estimation of Turbulence Dissipation Rate in a Stirred Mixer
Shin, Dong-Ho: Experimental and Numerical Investigation on Cross Flow in the PMR200 Core; Experimental Study on the Measurement of Effective Thermal Conductivity for VHTR Fuel Block Geometry
Simecek, Pavel: Heat Treatment of Long Products
Singh, Sidh Nath: Effect of Preheating on the Flow Characteristics of Swirling Multicoaxial Jets in an Expanded Confinement
Sinha, Animesh: Effect of Axial Wall Conduction and Ambient Heat-in-Leak on the Performance of a Two Fluid Counter-Flow Cryogenic Heat Exchanger, Using Finite Element Method
Skala, Vladislav: Flat Plate Boundary Layer Under Negative Pressure Gradient
Slabber, Johan: Numerical Study on Natural Convection Flow in MWCNT Nanofluid-filled Square Enclosure Based on Experimental Conductivity and Viscosity Model
Slaets, Peter: Effect of Nozzle Geometry on the Efficiency of Compressed Air Nozzles
Slangen, Pierre: Pool Evaporation of Hazardous Substances in Industrial Storage Dikes: a Study on Spatial and Temporal Temperature Variations and Its Consequences
Slootmaekers, Tim: Effect of Nozzle Geometry on the Efficiency of Compressed Air Nozzles
Smith, Rick: Comparison of the Evaporation and Condensation Heat Transfer Coefficients on the Outside of Smooth, Micro Fin and Vipertex 1EHT Enhanced Heat Transfer Tubes
Snape, Colin: CFD Simulation of the Hydrodynamics and Reaction Kinetics of Chemical Looping Combustion Process in a Fuel Reactor
Sohret, Yasin: Sensitive Approach to Exergy Analysis of Chemically Reacting Systems: Combustion Gas Evaluation
Specht, Eckehard: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Steelant, Johan: Temperature Measurements in a Multiphase Fluid Hammer
Stiles, David: Linear Stability Boundary for Simulated Oscillatory Flow Phenomena in Vertical Condensing Flows
Subramanya, Spoorthi: Effect of Ambient Heat-In-Leak and Longitudinal Wall Conduction on a Three-Fluid, Parallel-Flow Cryogenic Heat Exchanger
Sukomel, Ludmila: Heat Transfer and Hydrodynamics At Natural Circulation of Single and Two-phase Media in Channels with Different Cross-section Configuration
T'Jollyn, Ilya: Ice Fraction Estimation for Ice Slurries Through Impedance Measurements
Tahan Latibari, Sara: Entropy Generation and Convective Heat Transfer of Graphene Nanoplatelets Nanofluid for Laminar Forced Convection Flow
Tak, Nam-Il: Experimental Study on the Measurement of Effective Thermal Conductivity for VHTR Fuel Block Geometry
Takahashi, Kazunao: Application of Subgrid Stress Model to Volumetric PIV Results for Estimation of Turbulence Dissipation Rate in a Stirred Mixer
Taleb, Aly: A Two-Phase Single-Reciprocating-Piston Heat Conversion Engine
Teixeira, David: A Study of Heat Exchange Through an Helico-Axial Rotor of a Multiphase Pump
Teodori, Emanuele: Effect of Wettability on Nucleate Boiling
Tezel, F. Handan: Thermal Energy Storage by Using Adsorption
Than Oo, Amanullah: Modelling of Baffles in Electrostatic Precipitator (ESP) to Achieve Optimum Flow Distribution
Toninelli, Paolo: Effects of Geometry and Fluid Properties During Condensation in Minichannels: Experiments and Simulations
Torkildsen, Bernt-Helge: A Study of Heat Exchange Through an Helico-Axial Rotor of a Multiphase Pump
TP, Ashok Babu: Development of Vapour Compression Refrigeration System Test Rig and Evaluation of Test Data for R134a Condensation in Compact Heat Exchangers with Serrated Fin
Tsvetkov, Yury: Heat and Mass Transfer At Nanoparticles Synthesis in a Jet Plasmachemical Reactor: Modelling and Experiment
Uemura, Mitsuhiro: Enhancement of Forced-Convection Boiling Heat Transfer to Subcooled Liquid by Electric Field
Ugur, Burcu: Thermal Energy Storage by Using Adsorption
Uruba, Vaclav: On the Influence of Plasma DBD Actuator in Streamwise Orientation Inside a Narrow Channel
Uwanta, Ime: Combined Effects of Thermal-diffusion and Thermal Radiation on Transient MHD Natural Convection Flow in a Vertical Channel
Valente, Tomas: Effect of Wettability on Nucleate Boiling
Vamling, Lennart: New Measurement Approaches for Film Thickness and Wall Temperature in Falling Film Heat Exchangers
van den Broek, Martijn: Techno-thermodynamic Multi-objective Optimization of Organic Rankine Cycles for Waste Heat Recovery
Van der Veken, Wim: Improvements in Heat Transfer Network Modelling for Oil-Cooled Power Transformer Windings
Van linden, Veerle: A New Approach for Efficient Dehumidification
Van Wachem, Berend: A Simultaneous Application of PLIF-PIV-PTV for the Detailed Experimental Study of the Hydrodynamic Characteristics of Thin Film Flows
Vanierschot, Maarten: Effect of Nozzle Geometry on the Efficiency of Compressed Air Nozzles; Experimental Study of the Valve-bend Interaction in an Aircraft ECS-system
Veeredhi, Vasudeva Rao: Development of Vapour Compression Refrigeration System Test Rig and Evaluation of Test Data for R134a Condensation in Compact Heat Exchangers with Serrated Fin
Venkataram, Krishna: Effect of Ambient Heat-In-Leak and Longitudinal Wall Conduction on a Three-Fluid, Parallel-Flow Cryogenic Heat Exchanger; Effect of Axial Wall Conduction and Ambient Heat-in-Leak on the Performance of a Two Fluid Counter-Flow Cryogenic Heat Exchanger, Using Finite Element Method
Verbruggen, Aviel: High-quality CHP: Definition, Measurement, and Regulation
Vierendeels, Jan: A Study of Convective Heat Transfer in a Rotor-Stator System of Disk-type Electrical Machines
Vorres, Carol: Non-Intrusive Heat Flux Measurements Using Ultrasound
Wirtz, Siegmar: DEM Investigation of Transversal Mixing and Temperature Evolution in Rotary Drums; Experimental Investigation of Thermal Bed Mixing in Rotary Drums
Yagov, Victor: Study of Heat Transfer Mechanisms in Quenching Process
Yang, Xiaogang: CFD Simulation of the Hydrodynamics and Reaction Kinetics of Chemical Looping Combustion Process in a Fuel Reactor
Yarin, Alexander: Cooling High-Power Microelectronic Devices in Ground and Space Applications Using Nanofibers and Nanoparticles
Yoon, Su-Jong: Experimental and Numerical Investigation on Cross Flow in the PMR200 Core
Yu, Xiaoli: The Three Dimensional Simulating Study of the Flow and Heat Transfer in Detached Vehicular Cooling-Compartment
Yuhas, Donald: Non-Intrusive Heat Flux Measurements Using Ultrasound
Yun, Byong Jo: Flow Regime of Downward Air-Water Two-Phase Flow in a Vertical Narrow Rectangular Channel
Zabirov, Arslan: Heat Transfer and Hydrodynamics At Natural Circulation of Single and Two-phase Media in Channels with Different Cross-section Configuration; Study of Heat Transfer Mechanisms in Quenching Process
Zadrazil, Ivan: Towards A Universal Dimensionless Map of Flow Regime Transitions in Horizontal Liquid-Liquid Flows
Zappoli, Bernard: Critical Anomaly Effects in Supercritical Fluid Flows in Capillaries
Zhong, Xin: Hydrothermal Waves in Droplet Evaporation
Zhou, Bin: Numerical Study on Energy Consumption Characteristics for Different Wall Structures and Different Thickness of Thermal Insulation Layer Based on the Intermittent Energy Use Characteristics
Zhu, Qiu hua: Experimental Investigation of the Effects of Foam Height, Emissivity and Orientation on Buoyancy-Driven Convection in Open-Cell Aluminium Foam
Zubov, Nikita: Heat Transfer and Hydrodynamics At Natural Circulation of Single and Two-phase Media in Channels with Different Cross-section Configuration
Žužek, Vincencij: The Influence of the Resistor Temperature Coefficient to the Uncertainty of the Temperature Measurement

Author Index