| Author |
Session |
Start page |
Title |
| Daniela Satián-Guamán |
SS11.1 |
176 |
Impact of Transition-cell Variations on the Performance of Optomechanical Cavities Using III-V Semiconductor Materials |
| A A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Aajli, Ahmed |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Abdo-Sánchez, Elena |
Reg03.2 |
66 |
Design Challenges in Time-Varying Circuits Involving Varactor Diodes |
| SS10.1 |
268 |
Analysis of Time-Modulated Metasurface for Frequency Conversion |
| Achouri, Karim |
SS10.2 |
271 |
Angular Scattering Control with Multipolar Metasurfaces |
| Addamo, Giuseppe |
SS04.5 |
87 |
Study on Powder-Bed Fusion Laser-Beam Manufacturing of Profiled Feed-Horns for Space-based Sky Observations |
| Albert, Isabelle |
SS08.3 |
166 |
Experimental Validation of Passive Intermodulation Products Simulation by a Power Law Behavioral Model |
| Alcaide, Carlos |
SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| Alcarria, Antonio |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Aldea, Mikel |
Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| Alomainy, Akram |
SS14.3 |
108 |
A Low-profile Air-Filled SIW Resonant Wide-band Slot Antenna for Low-Loss Directive Radiation |
| Álvarez Ocampo, Carlos |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Alvarez-Botero, Germán |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Alvarez-Melcon, Alejandro |
Key2.1 |
|
Integral Equation Formulations for Multilayered Planar Circuits and Waveguide Devices |
| Reg02.3 |
53 |
Design of Bandpass Filters Composed of Dual-Mode Rectangular Cavities Using an Extended Iris Model |
| Reg09.1 |
320 |
Efficient Calculation of the 3D Rectangular Cavity Green's Functions Derivatives by the Ewald Method |
| Ammann, Max |
Reg05.3 |
294 |
On the Potential of Annular Sectors for Beamsteering in Miniaturized Platforms |
| Amor-Martin, Adrian |
SS05.6 |
133 |
Stability-Constrained Optimization of Reflective-Mode Planar Sensors |
| Reg09.3 |
324 |
On the Solution of 1D Multilayer Inverse Problems in Microwaves using Autodifferentiable Solvers |
| Reg09.6 |
331 |
First Steps on Automatic Differentiation of a Frequency-Domain Mode-Matching Solver |
| Anakabe, Aitziber |
SS05.1 |
118 |
A Combined Pole-Zero Identification and Winslow-Probe Approach for Efficient HPA Stability Analysis |
| Andres, Miguel |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Anee, Meratun |
Reg07.4 |
311 |
Nonlinear Finite Element Analysis of Thermal Runaway in Microwave-Heated Shale Using a C^\infty Smooth Conductivity Model |
| Angelotti, Alberto Maria |
SS06.2 |
16 |
Load-Pull Framework for Performance Assessment and Modeling of Microwave Power Amplifiers Under Faulty Array Conditions |
| Angulo, Luis |
SS17.1 |
278 |
Loewner Reduced Order Models in Time Domain for EM Applications |
| Antonini, Giulio |
Reg09.5 |
328 |
Dimensionality reduction via Active Subspaces and Polynomial Chaos Models |
| Antonino-Daviu, Eva |
Reg06.1 |
332 |
Triangular-Aperture Reflectarray for X Band Beam Steering Toward Reconfigurable Intelligent Surfaces |
| Arias Campo, Marta |
SS15.4 |
197 |
Modelling Stacked Glide-Symmetric Mushroom EBGs for 1-D Dispersion Analysis in 77 GHz CLAF Waveguides |
| Aroca, Daniel Talaya |
Reg06.1 |
332 |
Triangular-Aperture Reflectarray for X Band Beam Steering Toward Reconfigurable Intelligent Surfaces |
| Arregui, Ivan |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Artiga, Xavier |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Atanaskovic, Aleksandar |
Reg07.1 |
304 |
Conformal 3D TLM Model of Wearable Antenna for Analyses of Bending and Stretching Electromagnetic-Mechanical Effects |
| Auñón Marugán, Alicia |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Aygun, Sercan |
Reg03.1 |
63 |
Combination of Quantized Neural Networks with LSTMs for Design Automation of Power Amplifiers |
| Ayllon, Natanael |
SS05.1 |
118 |
A Combined Pole-Zero Identification and Winslow-Probe Approach for Efficient HPA Stability Analysis |
| B A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Bai, Chunjiang |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Bais, Abdul |
Reg01.1 |
31 |
Transfer Learning-Enhanced Space Mapping for Rapid Microwave Filter Optimization |
| Reg01.2 |
34 |
Machine-Learning-Driven Parameter Extraction for Accelerated Aggressive and Implict Space Mapping in Microwave Filter Design |
| Balewski, Lukasz |
Reg02.1 |
49 |
Optimization-Driven Full Wave Design of Passive Microwave Components and Antennas |
| SS04.2 |
82 |
Efficient Framework for Free-Form Modeling and Optimization of AM-oriented Microwave Components |
| Baquero-Escudero, Mariano |
SS12.6 |
98 |
Analysis of Structures With Inverted Microstrip Gap Waveguide Technology for Applications in Upper Mid-Band 7-24 GHz |
| SS09.4 |
213 |
Modification of the Periodic Pin Structure in Groove Gap Waveguides for Mitigation of the Multipactor Effect |
| Baranowski, Michal |
Reg02.1 |
49 |
Optimization-Driven Full Wave Design of Passive Microwave Components and Antennas |
| SS04.2 |
82 |
Efficient Framework for Free-Form Modeling and Optimization of AM-oriented Microwave Components |
| Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Barradas, Filipe |
SS06.3 |
19 |
Harmonic Balance-based PA Modeling for Wideband Performance Analysis |
| Baschirotto, Andrea |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Bayer, Hendrik |
SS09.1 |
204 |
Multipactor Verification of the ROSE-L Phased Array Radiator Elements |
| Beaumont, Arnaud |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Belenguer, Angel |
SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| SS14.5 |
114 |
Generalized Inverter Structure for Wideband ESICL Filter Design |
| Beleniotis, Petros |
SS06.4 |
22 |
Rapid Extraction of Trap Parameters for GaN HEMT Models |
| Benedicto, Jessica |
Reg02.4 |
56 |
Tx Bandpass Filters Based on Single-Stage Half-Wavelength Short-Ended Three-Section Coaxial Stepped Impedance Resonators |
| Beruete, Miguel |
SS12.5 |
97 |
Fully Metallic Gap Waveguide Radiators at V Band |
| Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| SS11.6 |
189 |
Photonic Multilayers on Diffuse Cement for Non-Iridescent Structural Colour and Passive Cooling |
| SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| Reg07.2 |
307 |
Localized Spin Wave Modes in the Fishnet Metamaterial |
| Reg06.5 |
342 |
Reconfigurable Intelligent Surfaces Using Liquid Crystals for 6G Communications |
| Beukman, Theunis |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| Bi, Ziqian |
Reg08.6 |
359 |
Hardware-in-the-Loop DSP Optimization for Eight-Lane High-Speed Copper Links Using Collective Particle Swarm Optimization |
| Biurrun, Pablo |
SS17.1 |
278 |
Loewner Reduced Order Models in Time Domain for EM Applications |
| Blazquez, Unai |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Boin, Nadia |
SS08.5 |
172 |
Evaluation of Passive Intermodulation Performance of a High Gain Ka-K Mesh Reflector Antenna |
| Boix, Rafael |
SS03.2 |
4 |
From Broadband Radiators to Filtering Antennas: A Circuit-Based Design Framework for Microstrip Antennas |
| SS15.3 |
196 |
Symmetries in the Evaluation of 4-D Reaction Integrals for the Spatial-Domain MoM Analysis of Multilayered Periodic Structures with RWG Basis Functions Defined in Periodic Meshes |
| Bonani, Fabrizio |
Reg03.4 |
70 |
Harmonic Balance TCAD Trap Modeling of GaN HEMTs for Design Technology Co-Optimization |
| Bonte, Sarah |
SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| Booth, Paul |
SS04.3 |
83 |
Multiphysics Modelling and High-Power Analysis of 3-D Printed Invar Spherical Dual-Mode Filters |
| Boria, Vicente |
SS01.3 |
|
Space Mapping Techniques for the Efficient Design of Microwave Filters for Satellite Communications |
| SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| Reg01.3 |
37 |
Randomized Space Mapping |
| SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| SS12.1 |
89 |
Half-Mode Groove Gap Waveguide Technology for High-Frequency Filtering Devices |
| SS12.2 |
92 |
Numerical Study of Multipactor Effect in Half-Mode Groove Gap Waveguide Low-Pass Corrugated Filters |
| SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| SS14.2 |
107 |
Coaxial to Empty Substrate Integrated Coaxial Line Transition for Small Satellite Microwave Payloads |
| SS14.5 |
114 |
Generalized Inverter Structure for Wideband ESICL Filter Design |
| Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| SS08.6 |
175 |
A Co-Design Methodology for High-Power RF Feed Networks in Space Applications Using EM and Circuit Modeling |
| SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| SS09.4 |
213 |
Modification of the Periodic Pin Structure in Groove Gap Waveguides for Mitigation of the Multipactor Effect |
| SS09.6 |
219 |
A Methodology for Power Handling and Multipactor Risk Assessment in High-Power RF Feeding Networks for Space Applications |
| Reg09.1 |
320 |
Efficient Calculation of the 3D Rectangular Cavity Green's Functions Derivatives by the Ewald Method |
| Bosi, Gianni |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Boutayeb, Halim |
Reg07.6 |
317 |
Electromagnetic Analysis of a Capacitive Sheet under Uniform Motion |
| Reg09.4 |
325 |
Space and Time Scaling Approach for Electromagnetic FDTD Analysis of Doppler Radars |
| Bradshaw, Benjamin |
SS05.4 |
127 |
Steady-State Cubic-Root Frequency Sensitivity of a Nonlinear Coupled RLC Circuit Oscillator At and Near its Exceptional Point Degeneracy |
| Bravo-Pino, Rainer |
SS11.6 |
189 |
Photonic Multilayers on Diffuse Cement for Non-Iridescent Structural Colour and Passive Cooling |
| Bronchalo, Enrique |
SS07.5 |
232 |
Coplanar Circular Sensor for Effective Dielectric Properties Sensing of Stratified Tissues: Numerical Model and EM Simulation |
| Bruni, Simona |
SS15.4 |
197 |
Modelling Stacked Glide-Symmetric Mushroom EBGs for 1-D Dispersion Analysis in 77 GHz CLAF Waveguides |
| Buitrago, Alejandro |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| C A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Cabedo-Fabrés, Marta |
Reg06.1 |
332 |
Triangular-Aperture Reflectarray for X Band Beam Steering Toward Reconfigurable Intelligent Surfaces |
| Cai, Wenjing |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Camacho, Miguel |
SS15.3 |
196 |
Symmetries in the Evaluation of 4-D Reaction Integrals for the Spatial-Domain MoM Analysis of Multilayered Periodic Structures with RWG Basis Functions Defined in Periodic Meshes |
| Capolino, Filippo |
SS05.4 |
127 |
Steady-State Cubic-Root Frequency Sensitivity of a Nonlinear Coupled RLC Circuit Oscillator At and Near its Exceptional Point Degeneracy |
| Cárdenas, Mateo |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Carpintero, Guillermo |
SS11.2 |
179 |
Efficient THz Generation via Amplitude Intracavity Laser Modulation |
| Carrera-Suárez, Fernando |
SS12.6 |
98 |
Analysis of Structures With Inverted Microstrip Gap Waveguide Technology for Applications in Upper Mid-Band 7-24 GHz |
| Casaletti, Massimiliano |
SS15.4 |
197 |
Modelling Stacked Glide-Symmetric Mushroom EBGs for 1-D Dispersion Analysis in 77 GHz CLAF Waveguides |
| Casasus-Goyeneche, Gorka |
SS13.1 |
250 |
Full-Metal Six-Port Switched-Beam Antenna Based on Capacitively Loaded Monopoles in an Annular Cavity for S-Band NTN/HAPS |
| SS13.2 |
253 |
Slot-Coupled Six-Element Sequential-Phase Circular Array for Directive Circular Polarization in L-Band |
| Celebi, Kemal |
Reg06.4 |
339 |
Capacity-Driven Optimization of Continuous MIMO Surfaces |
| Cervera, Raul |
SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| Cervera Marín, Raúl |
SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Cesar Cuello, Jessica |
SS11.2 |
179 |
Efficient THz Generation via Amplitude Intracavity Laser Modulation |
| Chan, Simon |
SS05.1 |
118 |
A Combined Pole-Zero Identification and Winslow-Probe Approach for Efficient HPA Stability Analysis |
| Charbon, Edoardo |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Che, Wenquan |
Reg01.6 |
46 |
Machine Learning-Enabled De-Embedding Method Addressing Fixture-DUT Discontinuity with a Modified Thru Dummy |
| Cheng, Qingsha |
SS01.4 |
|
Space Mapping: A Pathway to AI-Based Microwave and Antenna Design |
| Ciccognani, Walter |
SS06.6 |
28 |
Numerically Robust S-Domain Resistance Extraction for Equivalent-Circuit Modeling of Microwave FETs |
| Cogollos, Santiago |
SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| Colangeli, Sergio |
SS06.2 |
16 |
Load-Pull Framework for Performance Assessment and Modeling of Microwave Power Amplifiers Under Faulty Array Conditions |
| Colangeli, Sergio |
SS06.6 |
28 |
Numerically Robust S-Domain Resistance Extraction for Equivalent-Circuit Modeling of Microwave FETs |
| Collado, Carlos |
SS07.3 |
226 |
Numerical Analysis of Lateral Mode Interactions in Anti-series BAW Resonator Topologies |
| SS07.4 |
229 |
Design and Modeling Methodology for 4th-Order CRF BAW Filters |
| Collantes, Juan |
SS05.1 |
118 |
A Combined Pole-Zero Identification and Winslow-Probe Approach for Efficient HPA Stability Analysis |
| Córcoles, Juan |
SS15.3 |
196 |
Symmetries in the Evaluation of 4-D Reaction Integrals for the Spatial-Domain MoM Analysis of Multilayered Periodic Structures with RWG Basis Functions Defined in Periodic Meshes |
| SS15.5 |
200 |
Efficient Scattering of Waveguide-Like Periodic Structures via Hybrid Mode-Matching Scalar 2-D-FEM Scheme |
| Costanzo, Alessandra |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| Courrèges, Fabien |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Coves, Angela |
SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| Cruz, Jose Luis |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Cui, Jinyuan |
SS02_1.2 |
101 |
Knowledge-Based Neural Network for Improved Low-Voltage I-V Fitting in RF Transistor Modeling |
| Cunha, Telmo |
SS06.3 |
19 |
Harmonic Balance-based PA Modeling for Wideband Performance Analysis |
| D A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| D'Amico, Michele |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| D'Aniello, Federico |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| de Dios de Dios, Juan José |
SS14.5 |
114 |
Generalized Inverter Structure for Wideband ESICL Filter Design |
| de la Rubia, Valentin |
SS17.1 |
278 |
Loewner Reduced Order Models in Time Domain for EM Applications |
| SS17.2 |
279 |
Compressing MoM Systems for Fast Monostatic RCS Angular Sweeps |
| SS17.3 |
280 |
Sit Back, Relax and EM Coupling Matrix for Microwave Filter Design |
| SS17.4 |
281 |
Fast Uncertainty Quantification of Microwave Filter Performance within Material Fatigue Limit via the Reduced-Basis Method |
| de Paco, Pedro |
Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| de Paco Sanchez, Pedro Antonio |
Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| SS07.2 |
223 |
Multiband Synthesis Strategy for Wideband Acoustic Wave Ladder Filters |
| De Ruvo, Edoardo |
Reg03.4 |
70 |
Harmonic Balance TCAD Trap Modeling of GaN HEMTs for Design Technology Co-Optimization |
| Delgado-Lozano, Ignacio Maria |
SS03.2 |
4 |
From Broadband Radiators to Filtering Antennas: A Circuit-Based Design Framework for Microstrip Antennas |
| Delgado-Pinar, Martina |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Delhote, Nicolas |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| SS04.1 |
79 |
Automated Post-Manufacturing Tuning of 3D Printed Cavity Filters Based on a Unique Parametrized Coupling Matrix Model |
| Diaz Caballero, Elena |
SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Diaz-Beiza, Sebastian |
Reg05.2 |
291 |
High-Gain Circularly Polarized Patch Antenna Array with Groove Gap Waveguide Feed Network |
| Díaz-Rubio, Ana |
SS10.3 |
272 |
Chirality-induced Strongly Coupled Electromagnetic Modes in Photonic Metasurfaces |
| SS10.4 |
273 |
Bianisotropic Metasurfaces for Reconfigurable Asymmetric Absorption in the Infrared Domain |
| Diez, Antonio |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Dimitrijevic, Tijana |
Reg07.1 |
304 |
Conformal 3D TLM Model of Wearable Antenna for Analyses of Bending and Stretching Electromagnetic-Mechanical Effects |
| Dogan, Berkay |
SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| Dolado, Jorge |
SS11.6 |
189 |
Photonic Multilayers on Diffuse Cement for Non-Iridescent Structural Colour and Passive Cooling |
| Donati Guerrieri, Simona |
Reg03.4 |
70 |
Harmonic Balance TCAD Trap Modeling of GaN HEMTs for Design Technology Co-Optimization |
| Doncov, Nebojsa |
Reg07.1 |
304 |
Conformal 3D TLM Model of Wearable Antenna for Analyses of Bending and Stretching Electromagnetic-Mechanical Effects |
| Dou, Yuhang |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Du, Naike |
Reg05.1 |
288 |
A Magneto-electric(ME) Dipole Antenna for Biological Diagnosis Applications |
| Dukhopelnykov, Sergii |
SS16.1 |
238 |
Reciprocal Resonance Effects in the Scattering from Layered Cylindrical Luneburg Lens Partially Coated with Graphene |
| E A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Ederra, Iñigo |
SS13.4 |
259 |
Dual-Arm Asymmetric Feeders for Broadband Circularly-Polarized Gap Waveguide-Based Antenna Arrays |
| Ekman, Jonas |
Reg09.5 |
328 |
Dimensionality reduction via Active Subspaces and Polynomial Chaos Models |
| El Moudden, Hanaa |
SS05.3 |
124 |
Analysis of Injection Locking in the Presence of an Interferer |
| Enoksson, Peter |
Reg02.6 |
60 |
Micromachined Low-Loss Transition from Waveguide-to-Microstrip Line for Large MMIC Integration and Packaging at 250 GHz |
| Esposito, Ciro |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Esteban, Hector |
SS14.2 |
107 |
Coaxial to Empty Substrate Integrated Coaxial Line Transition for Small Satellite Microwave Payloads |
| SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| Esteve, Laura |
SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Estrada-Grijalba, Miguel |
Reg03.2 |
66 |
Design Challenges in Time-Varying Circuits Involving Varactor Diodes |
| F A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Farjana, Sadia |
Reg02.6 |
60 |
Micromachined Low-Loss Transition from Waveguide-to-Microstrip Line for Large MMIC Integration and Packaging at 250 GHz |
| Favennec, Jean François |
Reg02.4 |
56 |
Tx Bandpass Filters Based on Single-Stage Half-Wavelength Short-Ended Three-Section Coaxial Stepped Impedance Resonators |
| Feng, Feng |
SS01.5 |
|
Recent Advances in Mesh Space Mapping |
| SS02_2.1 |
134 |
Advanced MOR-based Neuro-TF Method for EM Modeling of Microwave Components |
| SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| Reg04.1 |
146 |
Recent Advances in Reusable Cascaded Modeling Using RLGC-Based Neuro-Eigenfunction for Microwave Components Design |
| Fernández, Armando |
SS03.2 |
4 |
From Broadband Radiators to Filtering Antennas: A Circuit-Based Design Framework for Microstrip Antennas |
| SS16.4 |
245 |
Equivalent Circuit for Strip-Like Spatiotemporal Periodic Structures |
| Fernández-Vicente, Juan |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Ferrando-Bataller, Miguel |
Key3.1 |
|
From Waveguide Modes to Characteristic Modes in Contemporary Antenna Design |
| SS13.1 |
250 |
Full-Metal Six-Port Switched-Beam Antenna Based on Capacitively Loaded Monopoles in an Annular Cavity for S-Band NTN/HAPS |
| SS13.2 |
253 |
Slot-Coupled Six-Element Sequential-Phase Circular Array for Directive Circular Polarization in L-Band |
| Ferrando-Rocher, Miguel |
SS12.4 |
94 |
Performance Evaluation of Hybrid Mushroom Ridge Waveguides for Power Distribution Networks |
| SS13.1 |
250 |
Full-Metal Six-Port Switched-Beam Antenna Based on Capacitively Loaded Monopoles in an Annular Cavity for S-Band NTN/HAPS |
| SS13.2 |
253 |
Slot-Coupled Six-Element Sequential-Phase Circular Array for Directive Circular Polarization in L-Band |
| Ferranti, Francesco |
SS02_1.3 |
|
From Machine Learning and Model Order Reduction in Microwave Design to Automated Microwave Characterization |
| Reg09.5 |
328 |
Dimensionality reduction via Active Subspaces and Polynomial Chaos Models |
| Fieramosca, Federica |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Fil, Nicolas |
SS08.3 |
166 |
Experimental Validation of Passive Intermodulation Products Simulation by a Power Law Behavioral Model |
| Fleury, Romain |
SS14.6 |
115 |
Modularity of Locally Resonant Metamaterial Topologies for Electrical Performance, Multipactor Threshold, and Time-Domain Behavior |
| Reg08.1 |
348 |
High-Power Ku-Band Narrowband Subwavelength Locally Resonant Metamaterial Filter for Space Applications |
| Reg08.3 |
352 |
Design and Multipactor Analysis of an X-band Quarter-Wavelength Two-Section Coaxial Stepped-Impedance Resonator Filter for High-Power Applications |
| Fontana, Andrés |
SS03.3 |
5 |
A 0.18-μm InGaAs Ku-Band Continuously-Tunable Bandstop Filter with Extended Passband Response |
| Forero, Felipe |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Frey, Dave |
SS06.1 |
13 |
Millimeter-Wave GaN Transmit/Receive RF Switch Evaluation with the Industry Standard ASM-HEMT |
| Fu, Tangyu |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| G A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| G. Machado, Gabriel |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Gahete, Carlos |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| Galeote, Ignacio |
SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| Gallego Cabo, Daniel |
SS11.2 |
179 |
Efficient THz Generation via Amplitude Intracavity Laser Modulation |
| García, Carolina |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| García Jiménez, Raúl |
SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| García Ruiz, Francisco |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| Garcia-Castillo, Luis Emilio |
Reg09.3 |
324 |
On the Solution of 1D Multilayer Inverse Problems in Microwaves using Autodifferentiable Solvers |
| Reg09.6 |
331 |
First Steps on Automatic Differentiation of a Frequency-Domain Mode-Matching Solver |
| Garcia-Collado, Angel |
Reg08.5 |
358 |
Broadband Linear-to-Circular Polarization Converter Using Paired-L Unit Cells |
| Garcia-Contreras, Gines |
SS15.5 |
200 |
Efficient Scattering of Waveguide-Like Periodic Structures via Hybrid Mode-Matching Scalar 2-D-FEM Scheme |
| Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Garcia-Martinez, Sergio |
SS15.6 |
201 |
Dispersion Analysis of Metasurfaces via Symmetry-Enhanced Multimodal Transfer Matrix-Method |
| García-Patrón, Martín |
SS08.1 |
160 |
PIM Troubleshooting Guideline |
| García-Vigueras, María |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Gargiulo, Antonio |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Gebara, Edward |
SS06.1 |
13 |
Millimeter-Wave GaN Transmit/Receive RF Switch Evaluation with the Industry Standard ASM-HEMT |
| Gebretsadik, Atli Lemma |
Reg05.6 |
301 |
Infinitesimal Dipole Model Aided Computation of Near-field Scattering Patterns for Reconfigurable Intelligent Surfaces |
| Geng, Yiwen |
Reg08.6 |
359 |
Hardware-in-the-Loop DSP Optimization for Eight-Lane High-Speed Copper Links Using Collective Particle Swarm Optimization |
| Gentili, Gian |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Gibiino, Gian Piero |
SS18_01.1 |
|
Introduction to MTT-S Young Professional Activities |
| SS06.2 |
16 |
Load-Pull Framework for Performance Assessment and Modeling of Microwave Power Amplifiers Under Faulty Array Conditions |
| Gil, Jordi |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| Gil, José |
SS15.2 |
195 |
Analysis and Design of Lens Antennas with Several Feeds Using a 2.5D FEM |
| Gómez Alcalá, Rafael |
SS15.2 |
195 |
Analysis and Design of Lens Antennas with Several Feeds Using a 2.5D FEM |
| Gómez-García, Roberto |
SS03.1 |
1 |
Optimization-Based Design of Ku-Band Air-Filled Substrate-Integrated-Waveguide Bandpass Filter With Transmission Zeros |
| Gómez-González, Eduardo |
Reg09.3 |
324 |
On the Solution of 1D Multilayer Inverse Problems in Microwaves using Autodifferentiable Solvers |
| Gómez-Hidalgo, Cristina |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Gómez-Tornero, Jose-Luis |
SS13.3 |
256 |
3D Location System with an Array of Two Single Port Leaky Wave Antennas |
| Gonzalez-Posadas, Vicente |
SS05.6 |
133 |
Stability-Constrained Optimization of Reflective-Mode Planar Sensors |
| Goracci, Guido |
SS11.6 |
189 |
Photonic Multilayers on Diffuse Cement for Non-Iridescent Structural Colour and Passive Cooling |
| Gourish Chandra Das, Pinki |
SS17.4 |
281 |
Fast Uncertainty Quantification of Microwave Filter Performance within Material Fatigue Limit via the Reduced-Basis Method |
| Gu, Ming |
Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| Guenier, Erwan |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Guglielmi, Marco |
Key1.1 |
|
Multimode Equivalent Networks: From Rome to Valencia, The Journey of a Lifetime |
| SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| Reg01.3 |
37 |
Randomized Space Mapping |
| SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| SS09.4 |
213 |
Modification of the Periodic Pin Structure in Groove Gap Waveguides for Mitigation of the Multipactor Effect |
| Guo, Shenglong |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Guo, Yuchao |
Reg05.1 |
288 |
A Magneto-electric(ME) Dipole Antenna for Biological Diagnosis Applications |
| Gustafsson, Mattias |
SS08.2 |
163 |
Passive Intermodulation in RF Front-Ends and Antennas |
| Guzmanvelez, Juan-Pablo |
Reg02.4 |
56 |
Tx Bandpass Filters Based on Single-Stage Half-Wavelength Short-Ended Three-Section Coaxial Stepped Impedance Resonators |
| H A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Han, Hu |
Reg07.5 |
314 |
A Novel multi-physics Simulation Method Combines with ANN and FDTD |
| Hazemoto, Tsuyoshi |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Henkel, Luca Michael |
Reg08.3 |
352 |
Design and Multipactor Analysis of an X-band Quarter-Wavelength Two-Section Coaxial Stepped-Impedance Resonator Filter for High-Power Applications |
| Herraiz, Roberto |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Herraiz Tirado, Dario |
SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| Herraiz-Zanón, David |
SS14.2 |
107 |
Coaxial to Empty Substrate Integrated Coaxial Line Transition for Small Satellite Microwave Payloads |
| SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| SS14.5 |
114 |
Generalized Inverter Structure for Wideband ESICL Filter Design |
| Herranz-Herruzo, Jose |
SS12.4 |
94 |
Performance Evaluation of Hybrid Mushroom Ridge Waveguides for Power Distribution Networks |
| SS12.6 |
98 |
Analysis of Structures With Inverted Microstrip Gap Waveguide Technology for Applications in Upper Mid-Band 7-24 GHz |
| Herwigk, Philipp |
Reg05.4 |
297 |
A Novel Modal Segmentation Approach Applied to the Efficient Design and Optimization of a Waveguide Slot Antenna |
| Hidalgo, Francisco |
SS15.3 |
196 |
Symmetries in the Evaluation of 4-D Reaction Integrals for the Spatial-Domain MoM Analysis of Multilayered Periodic Structures with RWG Basis Functions Defined in Periodic Meshes |
| Himdi, Mohamed |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Hinojosa, Juan |
Reg02.3 |
53 |
Design of Bandpass Filters Composed of Dual-Mode Rectangular Cavities Using an Extended Iris Model |
| Hoekstra, Tsjerk |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Hoflack, Bram |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Hostalet Vicent, Pau |
SS10.4 |
273 |
Bianisotropic Metasurfaces for Reconfigurable Asymmetric Absorption in the Infrared Domain |
| Hu, Haitian |
SS02_2.2 |
137 |
A Space-Mapping-Based Surrogate-Assisted Multistate Optimization Method for Tunable Four-Pole Waveguide Filter |
| SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Hu, Jiarun |
SS16.5 |
246 |
Full-Wave Dyadic Green's Function Based Reinforcement-Learning-Assisted Multi-user Beamfocusing Technique |
| Reg06.4 |
339 |
Capacity-Driven Optimization of Continuous MIMO Surfaces |
| Hu, Tiancun |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Huang, Peng |
Reg03.6 |
76 |
Electromagnetic Side-Channel Emission Analysis From Hardware Trojan for the Advanced Encryption Standard Circuits |
| Huang, Tao |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Huang, Yi |
SS08.2 |
163 |
Passive Intermodulation in RF Front-Ends and Antennas |
| Huertas, Juan Jose Ballesta |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Huéscar, Antonio |
Reg02.3 |
53 |
Design of Bandpass Filters Composed of Dual-Mode Rectangular Cavities Using an Extended Iris Model |
| Reg09.1 |
320 |
Efficient Calculation of the 3D Rectangular Cavity Green's Functions Derivatives by the Ewald Method |
| Huidobro, Miguel |
SS13.5 |
262 |
Optical Path-Based Design of a Reduced Graded-Index Maxwell Fish-Eye Lens for mmWave Beam Splitting |
| Hussain, Rifaqat |
SS14.3 |
108 |
A Low-profile Air-Filled SIW Resonant Wide-band Slot Antenna for Low-Loss Directive Radiation |
| I A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Iriarte, JuanCarlos |
SS13.4 |
259 |
Dual-Arm Asymmetric Feeders for Broadband Circularly-Polarized Gap Waveguide-Based Antenna Arrays |
| Reg06.3 |
338 |
Additively Manufactured Dual-Linear 4×8 Array for Beam-Steering in 6G Base Stations |
| J A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Játiva, Pablo Galán |
SS13.5 |
262 |
Optical Path-Based Design of a Reduced Graded-Index Maxwell Fish-Eye Lens for mmWave Beam Splitting |
| Jiang, Haolin |
Reg09.5 |
328 |
Dimensionality reduction via Active Subspaces and Polynomial Chaos Models |
| Jiang, Liguo |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Jiao, Dan |
SS02_1.1 |
|
Multiphysics-Informed Machine Learning for AI-Driven RFIC Design |
| SS16.6 |
249 |
Transient Maxwell-Quantum Transport Simulation in the THz Regime via an Efficient Wavefunction Approach |
| Jiménez, Javier |
Reg06.3 |
338 |
Additively Manufactured Dual-Linear 4×8 Array for Beam-Steering in 6G Base Stations |
| Jimenez-Suarez, Jesus Maria |
SS15.6 |
201 |
Dispersion Analysis of Metasurfaces via Symmetry-Enhanced Multimodal Transfer Matrix-Method |
| Jin, Xiaolin |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Joković, Jugoslav |
Reg07.1 |
304 |
Conformal 3D TLM Model of Wearable Antenna for Analyses of Bending and Stretching Electromagnetic-Mechanical Effects |
| Jorge-López, Alejandro |
SS12.2 |
92 |
Numerical Study of Multipactor Effect in Half-Mode Groove Gap Waveguide Low-Pass Corrugated Filters |
| SS09.4 |
213 |
Modification of the Periodic Pin Structure in Groove Gap Waveguides for Mitigation of the Multipactor Effect |
| Juan, Carlos |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| K A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Kaneko, Keiko |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Kaneria, Colton |
SS05.4 |
127 |
Steady-State Cubic-Root Frequency Sensitivity of a Nonlinear Coupled RLC Circuit Oscillator At and Near its Exceptional Point Degeneracy |
| Kimura, Yuma |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Kouhalvandi, Lida |
SS18_02.2 |
|
Automated Power Amplifier Designs Through Deep Neural networks: An hands-on perspective |
| Reg03.1 |
63 |
Combination of Quantized Neural Networks with LSTMs for Design Automation of Power Amplifiers |
| Kouny, Karim |
SS14.6 |
115 |
Modularity of Locally Resonant Metamaterial Topologies for Electrical Performance, Multipactor Threshold, and Time-Domain Behavior |
| Reg08.1 |
348 |
High-Power Ku-Band Narrowband Subwavelength Locally Resonant Metamaterial Filter for Space Applications |
| Reg08.3 |
352 |
Design and Multipactor Analysis of an X-band Quarter-Wavelength Two-Section Coaxial Stepped-Impedance Resonator Filter for High-Power Applications |
| Kuznetsov, Sergei A. |
SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| L A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Lafond, Olivier |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Laforge, Paul |
Reg01.1 |
31 |
Transfer Learning-Enhanced Space Mapping for Rapid Microwave Filter Optimization |
| Reg01.2 |
34 |
Machine-Learning-Driven Parameter Extraction for Accelerated Aggressive and Implict Space Mapping in Microwave Filter Design |
| Reg01.4 |
40 |
Reflected Group Delay for Lossy Filter Design Using Implicit Space Mapping |
| Lamecki, Adam |
Reg02.1 |
49 |
Optimization-Driven Full Wave Design of Passive Microwave Components and Antennas |
| SS04.2 |
82 |
Efficient Framework for Free-Form Modeling and Optimization of AM-oriented Microwave Components |
| Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Laso, Miguel |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Lattion, Corentin |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Lavado, Sergio Rivera |
SS11.2 |
179 |
Efficient THz Generation via Amplitude Intracavity Laser Modulation |
| Lemey, Sam |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Lenders, Sofie |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Leonardo, Carminati |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Leone, Marco |
Reg05.4 |
297 |
A Novel Modal Segmentation Approach Applied to the Efficient Design and Optimization of a Waveguide Slot Antenna |
| Leone, Marco |
Reg08.4 |
355 |
Efficient Analysis of Microstrip Structures Using a Broadband Modal Network Model |
| Leoz-Beltrán, Iñigo |
SS13.4 |
259 |
Dual-Arm Asymmetric Feeders for Broadband Circularly-Polarized Gap Waveguide-Based Antenna Arrays |
| Li, Chaoneng |
Reg07.5 |
314 |
A Novel multi-physics Simulation Method Combines with ANN and FDTD |
| Li, Haode |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| Li, Xiaolong |
SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| Li, Zhirui |
SS05.5 |
130 |
An Efficient Numerical Model for Single-loop, Dual-loop, and Injection-locked Optoelectronic Oscillators |
| Limiti, Ernesto |
SS06.6 |
28 |
Numerically Robust S-Domain Resistance Extraction for Equivalent-Circuit Modeling of Microwave FETs |
| Lin, Guanjie |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Lira-Valdes, Tomas |
SS10.1 |
268 |
Analysis of Time-Modulated Metasurface for Frequency Conversion |
| Liu, Bingchen |
SS02_2.2 |
137 |
A Space-Mapping-Based Surrogate-Assisted Multistate Optimization Method for Tunable Four-Pole Waveguide Filter |
| Liu, Hongyang |
SS16.6 |
249 |
Transient Maxwell-Quantum Transport Simulation in the THz Regime via an Efficient Wavefunction Approach |
| Liu, Jinyi |
SS02_2.1 |
134 |
Advanced MOR-based Neuro-TF Method for EM Modeling of Microwave Components |
| Liu, Junyi |
Reg02.2 |
50 |
Constrained Coupling Matrix Reconfiguration Guided by FOM for Numerical Synthesis Methods |
| Liu, Ke |
SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| Liu, Ping |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Liu, Wei |
Reg04.1 |
146 |
Recent Advances in Reusable Cascaded Modeling Using RLGC-Based Neuro-Eigenfunction for Microwave Components Design |
| Liu, Yuedong |
Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| Llamas, Ignacio |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Llorente, Roberto |
SS11.1 |
176 |
Impact of Transition-cell Variations on the Performance of Optomechanical Cavities Using III-V Semiconductor Materials |
| SS11.3 |
180 |
Inverse Design of a Grating Coupler for Multicore Fiber Considering Fabrication Tolerances |
| Llorente-Romano, Sergio |
Reg09.3 |
324 |
On the Solution of 1D Multilayer Inverse Problems in Microwaves using Autodifferentiable Solvers |
| Reg09.6 |
331 |
First Steps on Automatic Differentiation of a Frequency-Domain Mode-Matching Solver |
| Longhi, Patrick |
SS06.6 |
28 |
Numerically Robust S-Domain Resistance Extraction for Equivalent-Circuit Modeling of Microwave FETs |
| Lopetegi, Txema |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| López, Alejandro |
SS08.1 |
160 |
PIM Troubleshooting Guideline |
| Lopez de Pablo, Sergio |
Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| López Pastor, Jose Antonio |
SS13.3 |
256 |
3D Location System with an Array of Two Single Port Leaky Wave Antennas |
| Lörner, Markus |
Sponsor1.1 |
|
A practical overview of antenna characterization and how Digital Twins can look beyond |
| Losada, Vicente |
SS03.2 |
4 |
From Broadband Radiators to Filtering Antennas: A Circuit-Based Design Framework for Microstrip Antennas |
| Loscertales, Raül |
Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| SS07.2 |
223 |
Multiband Synthesis Strategy for Wideband Acoustic Wave Ladder Filters |
| Lucido, Mario |
SS16.1 |
238 |
Reciprocal Resonance Effects in the Scattering from Layered Cylindrical Luneburg Lens Partially Coated with Graphene |
| SS16.2 |
241 |
Coupling Analysis in the Plane-wave Scattering from Coplanar Thin Circular Disks: A Guaranteed-Convergence Technique |
| Lumia, Mauro |
SS04.5 |
87 |
Study on Powder-Bed Fusion Laser-Beam Manufacturing of Profiled Feed-Horns for Space-based Sky Observations |
| Lundgren, Per |
Reg02.6 |
60 |
Micromachined Low-Loss Transition from Waveguide-to-Microstrip Line for Large MMIC Integration and Packaging at 250 GHz |
| M A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Malki, Mohamed |
SS03.1 |
1 |
Optimization-Based Design of Ku-Band Air-Filled Substrate-Integrated-Waveguide Bandpass Filter With Transmission Zeros |
| Malkuchi, Rohith |
Reg08.6 |
359 |
Hardware-in-the-Loop DSP Optimization for Eight-Lane High-Speed Copper Links Using Collective Particle Swarm Optimization |
| Malleboina, Raju |
Reg05.6 |
301 |
Infinitesimal Dipole Model Aided Computation of Near-field Scattering Patterns for Reconfigurable Intelligent Surfaces |
| Malomo, Daniele |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Mánez-Espina, Luis |
SS10.3 |
272 |
Chirality-induced Strongly Coupled Electromagnetic Modes in Photonic Metasurfaces |
| SS10.4 |
273 |
Bianisotropic Metasurfaces for Reconfigurable Asymmetric Absorption in the Infrared Domain |
| Marcondes, Bruna |
SS06.3 |
19 |
Harmonic Balance-based PA Modeling for Wideband Performance Analysis |
| Margineda, Jose |
Reg08.5 |
358 |
Broadband Linear-to-Circular Polarization Converter Using Paired-L Unit Cells |
| Marini, Stephan |
SS12.1 |
89 |
Half-Mode Groove Gap Waveguide Technology for High-Frequency Filtering Devices |
| SS12.2 |
92 |
Numerical Study of Multipactor Effect in Half-Mode Groove Gap Waveguide Low-Pass Corrugated Filters |
| Martín-Guerrero, Teresa María |
Reg03.2 |
66 |
Design Challenges in Time-Varying Circuits Involving Varactor Diodes |
| Martin-Iglesias, Petronilo |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Martín-Núñez, Álvaro |
SS12.4 |
94 |
Performance Evaluation of Hybrid Mushroom Ridge Waveguides for Power Distribution Networks |
| Martínez, Javier |
SS07.6 |
235 |
Optical Sensing of Spin-crossover Nanoparticles Integrated into Optomechanical Cavities |
| Martinez, Jorge |
SS08.6 |
175 |
A Co-Design Methodology for High-Power RF Feed Networks in Space Applications Using EM and Circuit Modeling |
| SS09.6 |
219 |
A Methodology for Power Handling and Multipactor Risk Assessment in High-Power RF Feeding Networks for Space Applications |
| Martinez, Leticia |
SS14.4 |
111 |
Improved Low Losses and Simplified Fabrication Process Transition from Microstrip Line to Empty Substrate Integrated Coaxial Line |
| SS14.5 |
114 |
Generalized Inverter Structure for Wideband ESICL Filter Design |
| Martinez, Pedro |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Martinez-de-Rioja, Eduardo |
Reg06.2 |
335 |
Multibeam Reflective Metasurface for Quadruple OAM Beam Generation and Coverage Enhancement in Sub-THz 6G Systems |
| Martinez-Mendoza, Mónica |
SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| Marvasti, Mohammad |
Reg07.6 |
317 |
Electromagnetic Analysis of a Capacitive Sheet under Uniform Motion |
| Reg09.4 |
325 |
Space and Time Scaling Approach for Electromagnetic FDTD Analysis of Doppler Radars |
| Marzo, Andoni |
Reg06.3 |
338 |
Additively Manufactured Dual-Linear 4×8 Array for Beam-Steering in 6G Base Stations |
| Marzo, Asier |
Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| Masotti, Diego |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| Masui, Sho |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Mata, Rafael |
SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Mateos, Antonio D.Hernández |
SS13.3 |
256 |
3D Location System with an Array of Two Single Port Leaky Wave Antennas |
| Mateu, Jordi |
SS07.3 |
226 |
Numerical Analysis of Lateral Mode Interactions in Anti-series BAW Resonator Topologies |
| SS07.4 |
229 |
Design and Modeling Methodology for 4th-Order CRF BAW Filters |
| Matlock, Dashiel |
SS06.1 |
13 |
Millimeter-Wave GaN Transmit/Receive RF Switch Evaluation with the Industry Standard ASM-HEMT |
| Mayock, Jim |
SS05.1 |
118 |
A Combined Pole-Zero Identification and Winslow-Probe Approach for Efficient HPA Stability Analysis |
| Meca, Lucía |
SS08.1 |
160 |
PIM Troubleshooting Guideline |
| Medina, Francisco |
SS03.2 |
4 |
From Broadband Radiators to Filtering Antennas: A Circuit-Based Design Framework for Microstrip Antennas |
| SS16.3 |
244 |
Foster-like Equivalent Networks for FSSs with Cross-Polarization |
| SS16.4 |
245 |
Equivalent Circuit for Strip-Like Spatiotemporal Periodic Structures |
| Menargues, Esteban |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Mengozzi, Mattia |
SS06.2 |
16 |
Load-Pull Framework for Performance Assessment and Modeling of Microwave Power Amplifiers Under Faulty Array Conditions |
| Mercadé, Laura |
SS11.1 |
176 |
Impact of Transition-cell Variations on the Performance of Optomechanical Cavities Using III-V Semiconductor Materials |
| SS07.6 |
235 |
Optical Sensing of Spin-crossover Nanoparticles Integrated into Optomechanical Cavities |
| Mesa, Francisco |
SS15.6 |
201 |
Dispersion Analysis of Metasurfaces via Symmetry-Enhanced Multimodal Transfer Matrix-Method |
| Mesas, Joel |
Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| Mezzanotte, Paolo |
SS06.2 |
16 |
Load-Pull Framework for Performance Assessment and Modeling of Microwave Power Amplifiers Under Faulty Array Conditions |
| Mikhailikova, Iryna |
SS16.1 |
238 |
Reciprocal Resonance Effects in the Scattering from Layered Cylindrical Luneburg Lens Partially Coated with Graphene |
| SS16.2 |
241 |
Coupling Analysis in the Plane-wave Scattering from Coplanar Thin Circular Disks: A Guaranteed-Convergence Technique |
| Mikki, Said |
SS16.5 |
246 |
Full-Wave Dyadic Green's Function Based Reinforcement-Learning-Assisted Multi-user Beamfocusing Technique |
| SS13.6 |
265 |
A Stochastic Source-based Electromagnetic Framework for Estimating Spatial Correlation and Channel Capacity in MIMO Systems |
| Reg09.2 |
321 |
Electromagnetic Scatter Modeling and Computation Using Green's Functions Based on Random Field Theory |
| Reg06.4 |
339 |
Capacity-Driven Optimization of Continuous MIMO Surfaces |
| Miller, Nicholas |
SS06.1 |
13 |
Millimeter-Wave GaN Transmit/Receive RF Switch Evaluation with the Industry Standard ASM-HEMT |
| Miquel Espana, Cesar |
SS04.3 |
83 |
Multiphysics Modelling and High-Power Analysis of 3-D Printed Invar Spherical Dual-Mode Filters |
| SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Mir, Xavier |
Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| SS07.2 |
223 |
Multiband Synthesis Strategy for Wideband Acoustic Wave Ladder Filters |
| Mira, Fermin |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Moessinger, Alexander |
SS09.1 |
204 |
Multipactor Verification of the ROSE-L Phased Array Radiator Elements |
| Molero Jiménez, Carlos |
SS16.4 |
245 |
Equivalent Circuit for Strip-Like Spatiotemporal Periodic Structures |
| Molina-Cuberos, Gregorio |
Reg08.5 |
358 |
Broadband Linear-to-Circular Polarization Converter Using Paired-L Unit Cells |
| Monaco, Francisco |
SS11.3 |
180 |
Inverse Design of a Grating Coupler for Multicore Fiber Considering Fabrication Tolerances |
| Monerris, Óscar |
SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Morant, Maria |
SS11.1 |
176 |
Impact of Transition-cell Variations on the Performance of Optomechanical Cavities Using III-V Semiconductor Materials |
| SS11.3 |
180 |
Inverse Design of a Grating Coupler for Multicore Fiber Considering Fabrication Tolerances |
| Morro Ros, Jose Vicente |
Reg01.3 |
37 |
Randomized Space Mapping |
| SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| Mourier, Alban |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Mouthaan, Koen |
SS05.5 |
130 |
An Efficient Numerical Model for Single-loop, Dual-loop, and Injection-locked Optoelectronic Oscillators |
| Moya, Adrià |
Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| Mrozowski, Michal |
Reg02.1 |
49 |
Optimization-Driven Full Wave Design of Passive Microwave Components and Antennas |
| SS04.2 |
82 |
Efficient Framework for Free-Form Modeling and Optimization of AM-oriented Microwave Components |
| N A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Najafi, Hassan |
Reg03.1 |
63 |
Combination of Quantized Neural Networks with LSTMs for Design Automation of Power Amplifiers |
| Naranjo, Noelia |
SS17.2 |
279 |
Compressing MoM Systems for Fast Monostatic RCS Angular Sweeps |
| SS17.3 |
280 |
Sit Back, Relax and EM Coupling Matrix for Microwave Filter Design |
| Navarro-Gessé, Edgar |
SS07.3 |
226 |
Numerical Analysis of Lateral Mode Interactions in Anti-series BAW Resonator Topologies |
| SS07.4 |
229 |
Design and Modeling Methodology for 4th-Order CRF BAW Filters |
| Négrier, Romain |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Nieves, Encarnación |
SS12.1 |
89 |
Half-Mode Groove Gap Waveguide Technology for High-Frequency Filtering Devices |
| O A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Ogrin, Feodor |
Reg07.2 |
307 |
Localized Spin Wave Modes in the Fishnet Metamaterial |
| Oldoni, Matteo |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Oliva Aparicio, Antonio |
Reg02.3 |
53 |
Design of Bandpass Filters Composed of Dual-Mode Rectangular Cavities Using an Extended Iris Model |
| Reg09.1 |
320 |
Efficient Calculation of the 3D Rectangular Cavity Green's Functions Derivatives by the Ewald Method |
| Oluyemi, Olufemi |
Reg01.1 |
31 |
Transfer Learning-Enhanced Space Mapping for Rapid Microwave Filter Optimization |
| Reg01.2 |
34 |
Machine-Learning-Driven Parameter Extraction for Accelerated Aggressive and Implict Space Mapping in Microwave Filter Design |
| Omrani, Ridha |
Reg07.6 |
317 |
Electromagnetic Analysis of a Capacitive Sheet under Uniform Motion |
| Reg09.4 |
325 |
Space and Time Scaling Approach for Electromagnetic FDTD Analysis of Doppler Radars |
| Ono, Satoshi |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Ortiz, Sheyly |
SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| Ortiz-Ruiz, Sergio |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| P A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Palaci, Jesus |
Reg06.2 |
335 |
Multibeam Reflective Metasurface for Quadruple OAM Beam Generation and Coverage Enhancement in Sub-THz 6G Systems |
| Papadovasilakis, Marios |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Pareschi, Fabio |
Reg03.5 |
73 |
Modeling of Parasitic Network of Buck Converter Using Full-Wave EM Solver for Design-Oriented Analysis of the Switching Voltage |
| Parreño, Bibiana |
SS08.6 |
175 |
A Co-Design Methodology for High-Power RF Feed Networks in Space Applications Using EM and Circuit Modeling |
| SS09.6 |
219 |
A Methodology for Power Handling and Multipactor Risk Assessment in High-Power RF Feeding Networks for Space Applications |
| Pasadas Cantos, Francisco |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| Passos, Fabio |
Reg03.1 |
63 |
Combination of Quantized Neural Networks with LSTMs for Design Automation of Power Amplifiers |
| Pastor, Francisco |
Reg01.3 |
37 |
Randomized Space Mapping |
| Paterno, Aleksander |
SS11.4 |
183 |
Remote Monitoring of Harsh Environments Using Forward Brillouin Scattering in Optical Fibers |
| Pedro, Jose |
SS06.3 |
19 |
Harmonic Balance-based PA Modeling for Wideband Performance Analysis |
| Pejchal, Vaclav |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Perello Garcia, Belen |
Reg01.3 |
37 |
Randomized Space Mapping |
| Perez, Daniel |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Pérez-Escribano, Mario |
Reg03.2 |
66 |
Design Challenges in Time-Varying Circuits Involving Varactor Diodes |
| Pérez-Quintana, Dayan |
SS12.5 |
97 |
Fully Metallic Gap Waveguide Radiators at V Band |
| Reg06.5 |
342 |
Reconfigurable Intelligent Surfaces Using Liquid Crystals for 6G Communications |
| Perigaud, Aurelien |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| SS04.1 |
79 |
Automated Post-Manufacturing Tuning of 3D Printed Cavity Filters Based on a Unique Parametrized Coupling Matrix Model |
| Peverini, Oscar A. |
SS04.5 |
87 |
Study on Powder-Bed Fusion Laser-Beam Manufacturing of Profiled Feed-Horns for Space-based Sky Observations |
| Pinilla, Elena |
SS07.6 |
235 |
Optical Sensing of Spin-crossover Nanoparticles Integrated into Optomechanical Cavities |
| Pino, Marcos |
SS13.5 |
262 |
Optical Path-Based Design of a Reduced Graded-Index Maxwell Fish-Eye Lens for mmWave Beam Splitting |
| Plaza Gallardo, Borja |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Pons, Carlos |
SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| Pons-Abenza, Alejandro |
Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Potelon, Benjamin |
SS07.5 |
232 |
Coplanar Circular Sensor for Effective Dielectric Properties Sensing of Stratified Tissues: Numerical Model and EM Simulation |
| Poyatos Martínez, David |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Psychogiou, Dimitra |
SS03.3 |
5 |
A 0.18-μm InGaAs Ku-Band Continuously-Tunable Bandstop Filter with Extended Passband Response |
| SS04.6 |
88 |
Additively Manufactured 3D RF Lumped Components |
| Q A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Qian, Lu |
SS04.3 |
83 |
Multiphysics Modelling and High-Power Analysis of 3-D Printed Invar Spherical Dual-Mode Filters |
| Qin, Xuebin |
SS13.6 |
265 |
A Stochastic Source-based Electromagnetic Framework for Estimating Spatial Correlation and Channel Capacity in MIMO Systems |
| Qu, Kaige |
SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Quendo, Cedric |
SS07.5 |
232 |
Coplanar Circular Sensor for Effective Dielectric Properties Sensing of Stratified Tissues: Numerical Model and EM Simulation |
| Quesada Pereira, Fernando |
Reg02.3 |
53 |
Design of Bandpass Filters Composed of Dual-Mode Rectangular Cavities Using an Extended Iris Model |
| Reg09.1 |
320 |
Efficient Calculation of the 3D Rectangular Cavity Green's Functions Derivatives by the Ewald Method |
| Quevedo-Teruel, Oscar |
SS15.6 |
201 |
Dispersion Analysis of Metasurfaces via Symmetry-Enhanced Multimodal Transfer Matrix-Method |
| R A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Raboso, David |
SS09.1 |
204 |
Multipactor Verification of the ROSE-L Phased Array Radiator Elements |
| Rajo-Iglesias, Eva |
SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| Reg05.2 |
291 |
High-Gain Circularly Polarized Patch Antenna Array with Groove Gap Waveguide Feed Network |
| Ramírez, Franco |
SS05.3 |
124 |
Analysis of Injection Locking in the Presence of an Interferer |
| Ramos, Cristina |
SS12.6 |
98 |
Analysis of Structures With Inverted Microstrip Gap Waveguide Technology for Applications in Upper Mid-Band 7-24 GHz |
| Ramos Somolinos, David |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Ramos-Salas, Carlos |
SS17.1 |
278 |
Loewner Reduced Order Models in Time Domain for EM Applications |
| Rayas-Sanchez, Jose |
SS01.2 |
|
A Cognitive Formulation for Broyden-based Input Space Mapping Design Optimization |
| Ren, Qiang |
Reg03.6 |
76 |
Electromagnetic Side-Channel Emission Analysis From Hardware Trojan for the Advanced Encryption Standard Circuits |
| Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| SS17.6 |
285 |
A Dimension-Reduced FEM for Low-Frequency Electric Field Analysis of Ultra-Thin Metallic Interconnects |
| Reyes, Valentina |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Rimbaut, Samuel |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Rius, Eric |
Reg02.4 |
56 |
Tx Bandpass Filters Based on Single-Stage Half-Wavelength Short-Ended Three-Section Coaxial Stepped Impedance Resonators |
| Rivero, Laura |
SS14.2 |
107 |
Coaxial to Empty Substrate Integrated Coaxial Line Transition for Small Satellite Microwave Payloads |
| Robustillo, Pedro |
SS15.2 |
195 |
Analysis and Design of Lens Antennas with Several Feeds Using a 2.5D FEM |
| Rodriguez, Miguel |
SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| Rodríguez-Berral, Raúl |
SS16.3 |
244 |
Foster-like Equivalent Networks for FSSs with Cross-Polarization |
| SS16.4 |
245 |
Equivalent Circuit for Strip-Like Spatiotemporal Periodic Structures |
| Rodriguez-Trujillo, Damian |
Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| Rogier, Hendrik |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Rostan, Friedhelm |
SS09.1 |
204 |
Multipactor Verification of the ROSE-L Phased Array Radiator Elements |
| Roy, Langis |
SS03.5 |
9 |
Measurement-based Optimization Strategies for Reconfigurable Filtering Responses on a Field Programmable Microwave Substrate |
| Roy, Langis |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Rubio, Jesús |
SS15.2 |
195 |
Analysis and Design of Lens Antennas with Several Feeds Using a 2.5D FEM |
| Rudolph, Matthias |
SS06.4 |
22 |
Rapid Extraction of Trap Parameters for GaN HEMT Models |
| Ruiz, David |
Reg07.2 |
307 |
Localized Spin Wave Modes in the Fishnet Metamaterial |
| Reg06.5 |
342 |
Reconfigurable Intelligent Surfaces Using Liquid Crystals for 6G Communications |
| Ruiz, María |
SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| Ruiz-Cruz, Jorge |
SS15.5 |
200 |
Efficient Scattering of Waveguide-Like Periodic Structures via Hybrid Mode-Matching Scalar 2-D-FEM Scheme |
| Ruiz-Navarro, Alberto |
SS03.4 |
8 |
Multiphysics Power Handling Analysis of Reflectionless Bandpass Filters Based on Circuit Symmetry |
| S A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Sakai, Takeshi |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Salinas-Teruel, Néstor |
Reg03.2 |
66 |
Design Challenges in Time-Varying Circuits Involving Varactor Diodes |
| Sambaraju, Rakesh |
Reg08.6 |
359 |
Hardware-in-the-Loop DSP Optimization for Eight-Lane High-Speed Copper Links Using Collective Particle Swarm Optimization |
| San-Blas, Angel-Antonio |
SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| Sanchez-Olivares, Pablo |
SS15.6 |
201 |
Dispersion Analysis of Metasurfaces via Symmetry-Enhanced Multimodal Transfer Matrix-Method |
| Sanchez-Soriano, Miguel Angel |
SS03.4 |
8 |
Multiphysics Power Handling Analysis of Reflectionless Bandpass Filters Based on Circuit Symmetry |
| SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| Sancho, Manuel |
SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| Santamaría, Alex |
SS07.5 |
232 |
Coplanar Circular Sensor for Effective Dielectric Properties Sensing of Stratified Tissues: Numerical Model and EM Simulation |
| Santiago-Mesas, Sandra |
SS05.6 |
133 |
Stability-Constrained Optimization of Reflective-Mode Planar Sensors |
| Sarkar, Debdeep |
Reg02.5 |
59 |
FDTD-SVD Method for Analysis of Pulse-Excited Antennas |
| Reg05.6 |
301 |
Infinitesimal Dipole Model Aided Computation of Near-field Scattering Patterns for Reconfigurable Intelligent Surfaces |
| Sasaki, Mai |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| Savazzi, Stefano |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Schnieder, Frank |
SS06.4 |
22 |
Rapid Extraction of Trap Parameters for GaN HEMT Models |
| Schuchinsky, Alex |
SS08.2 |
163 |
Passive Intermodulation in RF Front-Ends and Antennas |
| Schulz, Phillip |
Reg08.4 |
355 |
Efficient Analysis of Microstrip Structures Using a Broadband Modal Network Model |
| Segovia-Vargas, Daniel |
SS05.6 |
133 |
Stability-Constrained Optimization of Reflective-Mode Planar Sensors |
| Seller-Rueda, Antonio |
SS12.1 |
89 |
Half-Mode Groove Gap Waveguide Technology for High-Frequency Filtering Devices |
| Serino, Antonio |
SS06.6 |
28 |
Numerically Robust S-Domain Resistance Extraction for Equivalent-Circuit Modeling of Microwave FETs |
| Setti, Gianluca |
Reg03.5 |
73 |
Modeling of Parasitic Network of Buck Converter Using Full-Wave EM Solver for Design-Oriented Analysis of the Switching Voltage |
| Shen, Guangxu |
Reg01.6 |
46 |
Machine Learning-Enabled De-Embedding Method Addressing Fixture-DUT Discontinuity with a Modified Thru Dummy |
| Shepherd, Duncan |
SS08.5 |
172 |
Evaluation of Passive Intermodulation Performance of a High Gain Ka-K Mesh Reflector Antenna |
| Shi, Yongkang |
Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| Simone, Silvia |
Reg03.5 |
73 |
Modeling of Parasitic Network of Buck Converter Using Full-Wave EM Solver for Design-Oriented Analysis of the Switching Voltage |
| Sirci, Stefano |
Reg05.5 |
300 |
SLM Integrated 3-D-Printed W-Band Antenna Feed Chains through a Design-to-Manufacturing Method |
| Smacchia, Davide |
SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| SS08.5 |
172 |
Evaluation of Passive Intermodulation Performance of a High Gain Ka-K Mesh Reflector Antenna |
| SS09.1 |
204 |
Multipactor Verification of the ROSE-L Phased Array Radiator Elements |
| Solera, Victor |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Sombrin, Jacques |
SS08.3 |
166 |
Experimental Validation of Passive Intermodulation Products Simulation by a Power Law Behavioral Model |
| Soto, Pablo |
SS12.1 |
89 |
Half-Mode Groove Gap Waveguide Technology for High-Frequency Filtering Devices |
| SS08.4 |
169 |
A Clam-shell Branch-line Hybrid for Low PIM Measurements in Waveguide Technology |
| SS09.2 |
207 |
Observations on Instantaneous RF Phase Modulation on Electron Dynamics in Coaxial Geometry |
| Su, Donglin |
Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| Su, Jiangtao |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| Su, Wenwei |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Suarez, Adrian |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Suarez, Almudena |
SS05.3 |
124 |
Analysis of Injection Locking in the Presence of an Interferer |
| T A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Tantot, Olivier |
SS04.1 |
79 |
Automated Post-Manufacturing Tuning of 3D Printed Cavity Filters Based on a Unique Parametrized Coupling Matrix Model |
| Teberio, Fernando |
Reg06.3 |
338 |
Additively Manufactured Dual-Linear 4×8 Array for Beam-Steering in 6G Base Stations |
| Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Reg08.2 |
351 |
Impact of Inner Conductor Profile Smoothness on the High-Power Behavior of Coaxial-Line Low-pass Filters |
| Teniente-Vallinas, Jorge |
Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| Thng, Guo Hao |
SS16.5 |
246 |
Full-Wave Dyadic Green's Function Based Reinforcement-Learning-Assisted Multi-user Beamfocusing Technique |
| Tianrang, Wang |
Reg04.5 |
154 |
Deep Learning-Driven Rapid Correction of Beam-Control Codes for Radome-Enclosed Phased Arrays |
| Tomassoni, Cristiano |
SS04.4 |
84 |
Waveguide-Fed Filtennas Based on C-shaped Resonant Slots: A New Approach for Independent External Coupling Control |
| Torres, Jose |
SS10.6 |
275 |
Validation of Shielding Properties of the Electromagnetic Absorber Materials Through Electromagnetic Simulation |
| Torres, Victor |
Reg06.6 |
345 |
Reconfigurable Intelligent Surface for 6G Systems Operating in the FR3 Band |
| Torres-García, Alicia |
Reg04.4 |
151 |
Diffractive Neural Network-Designed Multifunctional Metasurfaces for Mutual Coupling Mitigation in mmWave and Terahertz Wireless Communication Systems |
| SS11.6 |
189 |
Photonic Multilayers on Diffuse Cement for Non-Iridescent Structural Colour and Passive Cooling |
| SS10.5 |
274 |
Full-Space Dual-Band Metasurface for Independent Reflection and Transmission Wavefront Control at Millimeter Waves |
| Reg06.5 |
342 |
Reconfigurable Intelligent Surfaces Using Liquid Crystals for 6G Communications |
| Torrijos-Morán, Luis |
SS11.5 |
186 |
Fidelity-Aware Optimisation Framework for Electromagnetic Simulation in Integrated Photonics |
| Tottolo, Cedric |
SS08.3 |
166 |
Experimental Validation of Passive Intermodulation Products Simulation by a Power Law Behavioral Model |
| Trovarello, Simone |
SS05.2 |
121 |
Broadband Nonlinear Modeling of Nanometric Film-Based Ferroelectric Interdigitated Capacitors |
| Turki, Badredin |
SS08.5 |
172 |
Evaluation of Passive Intermodulation Performance of a High Gain Ka-K Mesh Reflector Antenna |
| U A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Ugle, Ashray |
SS15.4 |
197 |
Modelling Stacked Glide-Symmetric Mushroom EBGs for 1-D Dispersion Analysis in 77 GHz CLAF Waveguides |
| Uqaili, Junaid Ahmed |
Reg06.5 |
342 |
Reconfigurable Intelligent Surfaces Using Liquid Crystals for 6G Communications |
| Ushiyama, Taiyo |
Reg04.6 |
157 |
Hybrid Analysis Method Based on Quasi-Static EM Analysis and ANN Surrogate Model for Multi-Objective Optimization of Hybrid Coupler |
| V A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Vadalà, Valeria |
SS06.5 |
25 |
ANN Based Cryogenic DC Modeling of a 16 nm nMOS FinFET |
| Vague, José Joaquín |
SS12.2 |
92 |
Numerical Study of Multipactor Effect in Half-Mode Groove Gap Waveguide Low-Pass Corrugated Filters |
| SS12.3 |
93 |
Analysis of the Power Handling Capability in Ridge Gap Waveguide Technology |
| SS09.4 |
213 |
Modification of the Periodic Pin Structure in Groove Gap Waveguides for Mitigation of the Multipactor Effect |
| SS09.6 |
219 |
A Methodology for Power Handling and Multipactor Risk Assessment in High-Power RF Feeding Networks for Space Applications |
| Valdivieso, Aleix |
Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| SS07.2 |
223 |
Multiband Synthesis Strategy for Wideband Acoustic Wave Ladder Filters |
| Valencia-Sullca, Joaquín Francisco |
SS03.6 |
12 |
A New Topology of Waveguide Combline Filters Based on Planar Strips |
| Reg01.3 |
37 |
Randomized Space Mapping |
| Valenzuela-Pérez, Ana |
SS07.3 |
226 |
Numerical Analysis of Lateral Mode Interactions in Anti-series BAW Resonator Topologies |
| Valenzuela-Pérez, Ana |
SS07.4 |
229 |
Design and Modeling Methodology for 4th-Order CRF BAW Filters |
| Valerio, Guido |
SS15.4 |
197 |
Modelling Stacked Glide-Symmetric Mushroom EBGs for 1-D Dispersion Analysis in 77 GHz CLAF Waveguides |
| Van Damme, Tobias |
SS14.1 |
104 |
A Semi-Analytical Design Approach for Slab Air-Filled Substrate-Integrated Waveguides |
| Vaquero, Álvaro |
SS13.5 |
262 |
Optical Path-Based Design of a Reduced Graded-Index Maxwell Fish-Eye Lens for mmWave Beam Splitting |
| Vassilev, Vessen |
Reg02.6 |
60 |
Micromachined Low-Loss Transition from Waveguide-to-Microstrip Line for Large MMIC Integration and Packaging at 250 GHz |
| Vazquez-Roy, Jose-Luis |
Reg05.2 |
291 |
High-Gain Circularly Polarized Patch Antenna Array with Groove Gap Waveguide Feed Network |
| Vera-Sánchez, Javier |
SS13.1 |
250 |
Full-Metal Six-Port Switched-Beam Antenna Based on Capacitively Loaded Monopoles in an Annular Cavity for S-Band NTN/HAPS |
| SS13.2 |
253 |
Slot-Coupled Six-Element Sequential-Phase Circular Array for Directive Circular Polarization in L-Band |
| Verdeyme, Serge |
SS04.1 |
79 |
Automated Post-Manufacturing Tuning of 3D Printed Cavity Filters Based on a Unique Parametrized Coupling Matrix Model |
| Verdu, Jordi |
SS18_02.1 |
|
Massive Matching Network Exploration Algorithm for the Design of Power Amplifiers |
| Reg01.5 |
43 |
Fast Geometry-Driven Series Resistance Estimation for Microwave and RF Planar Layouts |
| Reg03.3 |
67 |
High-Selectivity Matching Optimization for Robust Power Amplifiers |
| SS07.1 |
220 |
A Ybus Implementation of the Mason Model for Optimization Routines in BAW-SMR Resonators |
| SS07.2 |
223 |
Multiband Synthesis Strategy for Wideband Acoustic Wave Ladder Filters |
| Vicente, Carlos |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| Vico, Felipe |
Reg06.1 |
332 |
Triangular-Aperture Reflectarray for X Band Beam Steering Toward Reconfigurable Intelligent Surfaces |
| Vorotynskyy Formagey, Vladyslav |
SS09.3 |
210 |
Automated Tuning of the Microwave Nulling for RF Breakdown Testing |
| W A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Walia, Gaurav |
Reg01.4 |
40 |
Reflected Group Delay for Lossy Filter Design Using Implicit Space Mapping |
| Wang, Jiahao |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| Wang, Jie |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| Wang, Jingbo |
SS03.1 |
1 |
Optimization-Based Design of Ku-Band Air-Filled Substrate-Integrated-Waveguide Bandpass Filter With Transmission Zeros |
| Wang, Mingyu |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Wang, Xinbo |
SS09.5 |
216 |
Recent Advances of PIC Simulator in Hyper Field Software and Its Application on the Multipactor Effect |
| Wang, Yi |
SS04.3 |
83 |
Multiphysics Modelling and High-Power Analysis of 3-D Printed Invar Spherical Dual-Mode Filters |
| Wang, Ying |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Watt, Dieynaba Mamadou |
SS04.1 |
79 |
Automated Post-Manufacturing Tuning of 3D Printed Cavity Filters Based on a Unique Parametrized Coupling Matrix Model |
| Wen, Haoqing |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Wild, Martin |
Reg04.2 |
149 |
Implementation of Surrogate Models for Microwave Filter Design |
| Wroe, John |
Reg07.3 |
308 |
Multiphysics Characterization of Porous Materials for Improved Structural and Durability Assessment of Masonry Structures |
| Wu, Ke-Li |
Reg02.2 |
50 |
Constrained Coupling Matrix Reconfiguration Guided by FOM for Numerical Synthesis Methods |
| Wu, Qi |
SS15.1 |
192 |
An Efficient Computation of Scattering from Human Body Based on Rotational Symmetry and 2.5-D FEM |
| Wu, Xin |
Reg08.6 |
359 |
Hardware-in-the-Loop DSP Optimization for Eight-Lane High-Speed Copper Links Using Collective Particle Swarm Optimization |
| X A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Xu, Kuiwen |
Reg04.3 |
150 |
A Neural-Network-Assisted Steady-State Simulation Framework for Wideband RF Device Behavior Models |
| Xu, Lumeng |
Reg09.2 |
321 |
Electromagnetic Scatter Modeling and Computation Using Green's Functions Based on Random Field Theory |
| Xue, Jianguo |
SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| Y A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Yan, Su |
Reg07.4 |
311 |
Nonlinear Finite Element Analysis of Thermal Runaway in Microwave-Heated Shale Using a C^\infty Smooth Conductivity Model |
| Yang, Jinyue |
Reg05.1 |
288 |
A Magneto-electric(ME) Dipole Antenna for Biological Diagnosis Applications |
| Yang, Yiqi |
SS02_2.2 |
137 |
A Space-Mapping-Based Surrogate-Assisted Multistate Optimization Method for Tunable Four-Pole Waveguide Filter |
| SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Yao, Xiayuan |
Reg05.1 |
288 |
A Magneto-electric(ME) Dipole Antenna for Biological Diagnosis Applications |
| Ye, Xiuzhu |
Reg05.1 |
288 |
A Magneto-electric(ME) Dipole Antenna for Biological Diagnosis Applications |
| Ye, Ze |
Reg07.5 |
314 |
A Novel multi-physics Simulation Method Combines with ANN and FDTD |
| Z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
| Zaman, Ashraf |
Reg02.6 |
60 |
Micromachined Low-Loss Transition from Waveguide-to-Microstrip Line for Large MMIC Integration and Packaging at 250 GHz |
| Zandamela, Abel |
Reg05.3 |
294 |
On the Potential of Annular Sectors for Beamsteering in Miniaturized Platforms |
| Zannoni, Mario |
SS04.5 |
87 |
Study on Powder-Bed Fusion Laser-Beam Manufacturing of Profiled Feed-Horns for Space-based Sky Observations |
| Zervos, Christos |
SS06.4 |
22 |
Rapid Extraction of Trap Parameters for GaN HEMT Models |
| Zhang, Dongrong |
Reg03.6 |
76 |
Electromagnetic Side-Channel Emission Analysis From Hardware Trojan for the Advanced Encryption Standard Circuits |
| SS17.6 |
285 |
A Dimension-Reduced FEM for Low-Frequency Electric Field Analysis of Ultra-Thin Metallic Interconnects |
| Zhang, Han |
SS17.6 |
285 |
A Dimension-Reduced FEM for Low-Frequency Electric Field Analysis of Ultra-Thin Metallic Interconnects |
| Zhang, Libin |
SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| Zhang, Miao |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Zhang, Qi-Jun |
SS01.1 |
|
Advances in Neuro-Space Mapping for Microwave Device Modeling |
| Zhang, Qijun |
SS02_1.2 |
101 |
Knowledge-Based Neural Network for Improved Low-Voltage I-V Fitting in RF Transistor Modeling |
| SS02_2.1 |
134 |
Advanced MOR-based Neuro-TF Method for EM Modeling of Microwave Components |
| SS02_2.2 |
137 |
A Space-Mapping-Based Surrogate-Assisted Multistate Optimization Method for Tunable Four-Pole Waveguide Filter |
| SS02_2.3 |
140 |
EM Sensitivity of Lossy Metals Using Fourth-Order Arnoldi Reduction and Self-Adjoint Method for Four-Pole Waveguide Filter Fast Frequency Sweep |
| SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Reg04.1 |
146 |
Recent Advances in Reusable Cascaded Modeling Using RLGC-Based Neuro-Eigenfunction for Microwave Components Design |
| Zhang, Wei |
SS02_2.2 |
137 |
A Space-Mapping-Based Surrogate-Assisted Multistate Optimization Method for Tunable Four-Pole Waveguide Filter |
| SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Zhang, Yihan |
Reg06.4 |
339 |
Capacity-Driven Optimization of Continuous MIMO Surfaces |
| Zhang, Zhiguo |
SS02_2.4 |
143 |
EM Topology Modeling for Waveguide Filter Based on CNN |
| Zhao, Qianqian |
SS17.5 |
282 |
Physical-Intuitive Model Order Reduction Method Based on Centroid-Midpoint Basis Transformation for Fast Analysis of Power Integrity Problems |
| Zhou, Pinhao |
Reg01.6 |
46 |
Machine Learning-Enabled De-Embedding Method Addressing Fixture-DUT Discontinuity with a Modified Thru Dummy |