Time (Warsaw) Auditorium I Auditorium II Auditorium III

Monday, June 3
09:30-10:00 Opening Ceremony
10:00-11:40 Session 1.1 - General Session - PART I Session 1.2 - Special Session #13 - Artificial Neural Networks in Aviation and Aerospace - PART I Session 1.3 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART I
11:40-12:00 Coffee Break
12:00-13:00 Keynote Session #1 - Felix Yanovsky
Peculiarities of W-band cloud radar calibration based on multi-instrument measurements
13:00-14:20 Lunch
14:30-15:55 Military Metrology for AeroSpace - PART I
15:55-16:20 Coffee Break
16:20-17:40 Session 2.1 - Military Metrology for AeroSpace - PART II Session 2.2 - Special Session #13 - Artificial Neural Networks in Aviation and Aerospace - PART II Session 2.3 - Special Session #14 - Structural Health Monitoring and Nondestructive Testing for Aerospace
19:00-22:00 Welcome Party

Tuesday, June 4
09:00-10:40 Session 3.1 - Special Session #06: Advances in Measurements for Autonomous Space Systems and for the Development and Testing of their Subsystems Session 3.2 - Special Session #08: University Satellites and Aerospace Research and Development Session 3.3 - Special Session #03: Metrology for Maritime Transport, Ports and Shipping
10:40-11:00 Coffee Break
11:00-12:00 Keynote Session #2 - Mirosław Wendeker
RodLife - Helicopter dynamic system for digital twin purposes
12:00-13:20 Session 4.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART I Session 4.2 - Special Session #01: Metrology and Instrumentation for Unmanned Aerial Vehicles Session 4.3 - Special Session #05: Emerging Trends in Multimodal Sensor Fusion for Enhanced Aerospace Metrology
13:20-14:20 Lunch
14:30-16:15 Session 5.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART II Session 5.2 - Special Track CASTAWAYS - Criteria and Technologies for the Development of a "New Space" Ecosystem Session 5.3 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART II
16:15-16:30  
16:30-16:50 Coffee Break
16:50-17:40 Tutorial #1 - Konrad Jędrzejewski
Passive Radar Observation of Space Objects using LOFAR Radio Telescopes		 Tutorial #2 - Jiří Zachardala
Personal flying will be available to everyone in less than two decades		  
20:00-23:00 Gala Dinner

Wednesday, June 5
09:30-10:30 Session 6.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART III Session 6.2 - Special Session #11: Aerodynamic Measurement and Control of Unmanned Aerial Vehicles Session 6.3 - General Session - PART II
10:30-11:10  
11:10-11:30 Coffee Break
11:30-12:30 Keynote Session #3 - Philip Johannes Steinbild
Artificial Neural Networks for Signal Analysis of Electrical Time Domain Reflectometry Based Sensors
12:30-13:20 Tutorial #3 - Paweł Magryta, Konrad Pietrykowski
Wind power - Custom wind tunnel and gyrocopter presentation
13:20-14:30 Lunch
14:30-15:00 Poster Session
15:00-16:00 Session 7.1 - Special Session #10: Optical and Innovative Sensors for Aerospace Session 7.2 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART III Session 7.3 - General Session - PART III
16:00-16:20    
16:20-16:40 Coffee Break
16:40-17:00 Closing and Award Ceremony

Monday, June 3

Monday, June 3 9:30 - 10:00

Opening Ceremony

Monday, June 3 10:00 - 11:40

Session 1.1 - General Session - PART I

Room: Auditorium I
10:00 Improved Kalman Filter in Variometer
Jacek Pieniążek (Politechnika Rzeszowska, Poland)
10:20 Microwave Analysis of Lunar Lava Tubes Simulant Materials and Environment
Roberto Pastore and Andrea Delfini (Sapienza University of Rome, Italy); Davide Micheli (Telecom Italia - TILAB, Italy); Fabio Santoni (Sapienza University of Rome, Italy); Fabrizio Piergentili (DIMA SAPIENZA, Italy); Paolo Marzioli and Michele Lustrino (Sapienza University of Rome, Italy); Mario Marchetti (VIA SUVERETO 263, Italy & Sapienza University of Rome, Italy); Marta Albano (Agenzia Spaziale Italiana, Italy)
10:40 Analysis of Small Satellite-Based Lunar Navigation Service Availability and Accuracy on the Surface and in Low Orbit
Rohan Kapoor (Royal Melbourne Institute of Technology, Australia); Alessandro G M Gardi (Khalifa University, United Arab Emirates & RMIT University, Australia); Roberto Sabatini (Khalifa University of Science and Technology, United Arab Emirates & IEEE AESS Virtual Distinguished Lecture, United Arab Emirates)
11:00 Real Time Non-Cooperative Surveillance of Resident Space Objects Using Estimation-Based Measurement Association
Khaja Faisal Hussain (Khalifa Univrsity of Science and Technology, United Arab Emirates); Kathiravan Thangavel and Nour El-Din Safwat (Khalifa University, United Arab Emirates); Alessandro G M Gardi (Khalifa University, United Arab Emirates & RMIT University, Australia); Roberto Sabatini (Khalifa University of Science and Technology, United Arab Emirates & IEEE AESS Virtual Distinguished Lecture, United Arab Emirates)
11:20 Identification of Longitudinal Aircraft Modes and Aerodynamic Parameters With Flight Trials
Angelo Lerro (Politecnico di Torino, Italy); Lorenzo Trainelli (Politecnico di Milano, Italy); Luca de Pasquale (Politecnico di Torino, Italy)

Monday, June 3 10:00 - 11:40

Session 1.2 - Special Session #13 - Artificial Neural Networks in Aviation and Aerospace - PART I

Room: Auditorium II
10:00 Measurement Uncertainty of Airplane Takeoff and Landing Method
Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Paweł Tomiło and Anna Zalewska-Tytlak (Lublin University of Technology, Poland)
10:20 Aircraft Diagnostics Using Convolutional Neural Networks
Dariusz Mika (The University of Applied Sciences in Chełm, Poland); Jerzy Józwik (Lublin University of Technology, Poland); Arkadiusz Tofil (University of Applied Sciences in Chełm, Poland); Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Paweł Pioś (University of Applied Sciences in Chełm, Poland); Paweł Tomiło (Lublin University of Technology, Poland)
10:40 Modelling of Shear Strength of Single Lap Adhesive Joints Using Neural Networks
Monika Kulisz and Katarzyna Biruk-Urban (Lublin University of Technology, Poland)
11:00 AI-Based Method of Air Traffic Controller Workload Assessment
Jan Laskowski, Paweł Tomiło and Agnieszka Laskowska (Lublin University of Technology, Poland); Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Edward Kozłowski, Łukasz Skowron and Radosław Piątek (Lublin University of Technology, Poland); Piotr Mamcarz (The John Paul II Catholic University of Lublin, Poland)
11:20 Acoustic Signal Analysis of the Targets of Distributed Airspace Monitoring System
Oleksii Siechko and Anton Kitsera (Lviv Polytechnic National University, Ukraine); Roman Kochan (University of Bielsko-Biala & Lviv Politechnic National University, Poland); Jerzy Józwik (Lublin University of Technology, Poland); Arkadiusz Tofil (University of Applied Sciences in Chełm, Poland); Dariusz Mika (The University of Applied Sciences in Chełm, Poland)

Monday, June 3 10:00 - 11:40

Session 1.3 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART I

Room: Auditorium III
10:00 Surface Roughness of Magnesium Alloy AZ91D After Rough Milling Using Carbide End Mills With Different Rake Angle
Ireneusz Zagórski (Lublin University of Technology, Poland)
10:20 Vibrations During Magnesium Alloys Milling With Different Toolholders
Jarosław Korpysa (Lublin University of Technology, Poland)
10:40 Non-Contact Coordinate Measurements of Cutting Tool Wear
Barbara Jamuła, Marek Magdziak and Anna Bazan (Rzeszów University of Technology, Poland)
11:00 Assessment of the Bonding Force Between the Thin NiTi Wire and 3D Printed Polymeric Matrix
Sebastian Sławski, Jonasz Hartwich, Sławomir Duda and Rafał Bartusiak (Silesian University of Technology, Poland)
11:20 Comparative Analysis of the Effectiveness of Removing Surface Defects With Ceramic and Wire Brushes
Jakub Matuszak, Krzysztof Ciecieląg, Agnieszka Skoczylas and Kazimierz Zaleski (Lublin University of Technology, Poland)

Monday, June 3 11:40 - 12:00

Coffee Break

Monday, June 3 12:00 - 13:00

Keynote Session #1 - Felix Yanovsky
Peculiarities of W-band cloud radar calibration based on multi-instrument measurements

Monday, June 3 13:00 - 14:20

Lunch

Monday, June 3 14:30 - 15:55

Military Metrology for AeroSpace - PART I

Monday, June 3 15:55 - 16:20

Coffee Break

Monday, June 3 16:20 - 17:40

Session 2.1 - Military Metrology for AeroSpace - PART II

Room: Auditorium I

Monday, June 3 16:20 - 17:40

Session 2.2 - Special Session #13 - Artificial Neural Networks in Aviation and Aerospace - PART II

Room: Auditorium II
16:20 Modelling of Selected Surface Roughness Parameters Using ANN in Waterjet Cutting
Katarzyna Biruk-Urban and Monika Kulisz (Lublin University of Technology, Poland)
16:40 Development and Verification of an Original Method for Determining the Optimized Measurement Time With an Inspection Probe on a CNC Machine
Jerzy Józwik, Daria Sałamacha, Michał Leleń, Monika Kulisz, Paweł Pieśko, Magdalena Zawada-Michałowska, Marcin Barszcz and Kamil Cybul (Lublin University of Technology, Poland)
17:00 ADS-B Data Anomaly Detection With Machine Learning Methods
Raed Abu Zitar (Sorbonne University-Abu Dhabi, United Arab Emirates)
17:20 Downwash and Upwash Prediction Model for Unconventional Lifting Configuration
Giorgio Antonio Orlando, Angelo Lerro and Gioacchino Cafiero (Politecnico di Torino, Italy)

Monday, June 3 16:20 - 17:40

Session 2.3 - Special Session #14 - Structural Health Monitoring and Nondestructive Testing for Aerospace

Room: Auditorium III
Chair: Alessandro Sardellitti (Universitas Mercatorum, Italy)
16:20 Simultaneous Estimation of Conductivity and Lift-Off Using Dimensional Analysis: A Preliminary Analysis
Alessandro Sardellitti (Universitas Mercatorum, Italy); Vincenzo Mottola and Filippo Milano (University of Cassino and Southern Lazio, Italy); Luigi Ferrigno (University of Cassino, Italy); Antonello Tamburrino (University of Cassino and Southern Lazio, Italy); Marco Laracca (Sapienza University of Rome, Italy)
16:40 The CCPS (Customized Crack Propagation Sensor) Concept as a Crack Gauge With Enhanced Functional Features for SHM
Artur Kurnyta (a) Airworthiness Division Air Force Insitute of Technology Warsaw, Poland b) Łukasiewicz Research Network - Institute); Andrzej Leski (Łukasiewicz Research Network - Institute of Aviation, Poland)
17:00 Rapid Prototyping Algorithm for Customized Crack Propagation Sensors for SHM Systems
Paulina Kurnyta-Mazurek (Faculty of Mechatronics, Armament and Aerospace Military University of Technology Warsaw, Poland); Artur Kurnyta (Airworthiness Division Air Force Institute of Technology Warsaw, Poland; Łukasiewicz Research Network - Institute of Av); Mariusz Janczewski (Faculty of Mechatronics, Armament and Aerospace Military University of Technology Warsaw, Poland)
17:20 Improving Defect Detection in Eddy Current Testing Using Multi-Frequency Rotating Eddy Current Strategy
Federico Carere (Telematic University Pegaso, Italy); Silvia Sangiovanni and Marco Laracca (Sapienza University of Rome, Italy); Alessandro Sardellitti (Universitas Mercatorum, Italy); Luigi Ferrigno (University of Cassino, Italy)

Monday, June 3 19:00 - 22:00

Welcome Party

Tuesday, June 4

Tuesday, June 4 9:00 - 10:40

Session 3.1 - Special Session #06: Advances in Measurements for Autonomous Space Systems and for the Development and Testing of their Subsystems

Room: Auditorium I
9:00 ROS 2 Integrated Continuous Terrain Mapping Comparison for Autonomous Navigation in Unstructured Environments
Simone Fortuna (Università Degli Studi di Padova, Italy); Sebastiano Chiodini, Andrea Valmorbida and Marco Pertile (University of Padova, Italy)
9:20 GNSS Test Bench Calibration for Space Service Volume Applications
Andrea Piccolo (Joint Research Centre European Commission, Italy); Francesco Menzione (European Commission Joint Research Center, European Union)
9:40 Evaluation Tool for Hybrid Launch Vehicle Navigation Systems and Measurements Fusion
Tommaso Pantalani (Sapienza Università di Roma, Italy); Emanuele Perfetti, Sidhant Kumar, Roberto Pastore and Fabio Santoni (Sapienza University of Rome, Italy); Simone Ciabuschi and Marta Albano (Agenzia Spaziale Italiana, Italy); Paolo Marzioli (Sapienza University of Rome, Italy); Fabrizio Piergentili (DIMA SAPIENZA, Italy)
10:00 Improving Keypoints Tracking With Machine-Learned Features in Event-Camera-Based Visual Odometry
Sebastiano Chiodini, Giovanni Trevisanuto, Carlo Bettanini, Giacomo Colombatti and Marco Pertile (University of Padova, Italy)
10:20 Development of a Multi-Axial Force Sensor for Small Satellite Docking
Matteo Veronese (University of Padova, Italy); Alex Caon (Delft University of Technology, The Netherlands); Riccardo Giubilato (German Aerospace Center, Germany); Francesco Branz and Alessandro Francesconi (University of Padova, Italy)

Tuesday, June 4 9:00 - 10:40

Session 3.2 - Special Session #08: University Satellites and Aerospace Research and Development

Room: Auditorium II
9:00 LSM-Aided Estimation Filter Based Geostationary Satellite Navigation With Available GNSS Signals
Furkan Şevik and Demet Cilden-Guler (Istanbul Technical University, Turkey)
9:20 Development of Magnetometer Sensors Calibration Platform and Orbital Satellite Scenario Emulation
El Yazid Belaidi (Satellite Development Centre, Algeria); Aissa Boutte (Satellite Development Center (CDS), Algeria & Algerian Space Agency (ASAL), Algeria); Mohamed Berroua Benzina (Satellite Devlopment Center, Algeria)
9:40 Orbit Estimation Technology for the Initial Phases of a Nanosatellite Mission
Alexander Spiridonov, Vasilina Baranova, Vladimir Cherny, Sergey Semenovich, Dmitriy Ushakov and Vladimir Saetchnikov (Belarusian State University, Belarus)
10:00 Geometric Approach to Determining the Space Object Orbit Altitude Using Angels-Only Measurements
Vasilina Baranova, Alexander Spiridonov, Dmitriy Ushakov, Vladimir Kozlov, Vladimir Cherny and Vladimir Saetchnikov (Belarusian State University, Belarus)
10:20 The Prototype of Wide-Aperture Optical System for Communication With Student Satellite
Siarhei Liashkevich, Kseniya Yudytskaya and Vladimir Saetchnikov (Belarusian State University, Belarus)

Tuesday, June 4 9:00 - 10:40

Session 3.3 - Special Session #03: Metrology for Maritime Transport, Ports and Shipping

Room: Auditorium III
9:00 Trends in Maritime Communications
Peter A Pokorny (JCJ Consulting and Nova Systems Pty Ltd, Australia); Jillian Carson-Jackson (The Nautical Institute, Australia & JCJ Consulting, Australia)
9:20 Introduction to CLASS (Cyber, Land, Air, Sea, Space) Surveillance Systems
Michele Fiorini (Leonardo S.p.A., Italy); Marco Galloro (Leonardo SpA, Italy); Francesco De Angelis (Leonardo S.p.A., Italy)
9:40 Geopolitics of Arctic Shipping: Focus on the Northern Sea Route (NSR)
Michele Fiorini (Leonardo S.p.A., Italy); Alexandra Middleton (University of Oulu, Finland)
10:00 Capabilities of Galileo New Services in Maritime Applications
Francesco De Angelis and Giovanni B. Palmerini (Sapienza Università di Roma, Italy)
10:20 Mobility Data Mining: The Maritime Use Case
Alexandros Troupiotis-Kapeliaris and Dimitrios Zissis (University of the Aegean, Greece); Sean Kohlbrenner and Christos Kastrisios (University of New Hampshire, USA)

Tuesday, June 4 10:40 - 11:00

Coffee Break

Tuesday, June 4 11:00 - 12:00

Keynote Session #2 - Mirosław Wendeker
RodLife - Helicopter dynamic system for digital twin purposes

Tuesday, June 4 12:00 - 13:20

Session 4.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART I

Room: Auditorium I
12:00 ISAM and Lunar Exploration: Some Current Researches at Politecnico di Torino
Stefano Mauro and Marcello Romano (Politecnico di Torino, Italy)
12:20 Compact Label-Free Microfluidic System for Single Cell Imaging and Diagnosis
Zhe Wang (University of Naples Federico II, Italy); Marika Valentino (ISASI-CNR, Italy); Jaromir Behal (University of Naples Federico II); Massimiliano Villone (University of Naples Federico II, Italy); Silvia Mari and Francesca Ferranti (ASI, Italy); Pier Luca Maffettone (University of Naples Federico II, Italy); Lisa Miccio (CNR-ISASI, Italy)
12:35 Thin Polymeric Film Functionalized by AuNPs for High Sensitive Protein Biosensing
Concetta Di Natale (University of Naples Federico II, Italy); Sara Coppola (Institute of Applied Sciences & Intelligent Systems "E. Caianiello", Italy); Veronica Vespini (CNR-ISASI, Italy); Volodymyr Tkachenko (Institute of Applied Sciences and Intelligent Systems, Italy); Giuseppe Vitiello and Giuseppina Luciani (University of Naples Federico II, Italy); Francesca Ferranti and Silvia Mari (ASI, Italy); Simonetta Grilli (National Council of Research, Italy); Pier Luca Maffettone (University of Naples Federico II, Italy); Simone Russo (Università Degli Studi di Napoli Federico II, Italy); Pietro Ferraro (ISASI CNR, Italy)
12:50 Holographic Spatiotemporal Inspection Allows Comprehensive Characterization of Functionalized Membrane
Zhe Wang (University of Naples Federico II, Italy); Anna Palma (Institute of Applied Sciences and Intelligent Systems E. Caianiello, Italy); Vincenzo Ferraro and Concetta Di Natale (University of Naples Federico II, Italy); Veronica Vespini (CNR-ISASI, Italy); Fabiana Graziano (ISASI CNR, Italy); Francesca Ferranti and Silvia Mari (ASI, Italy); Simonetta Grilli (National Council of Research, Italy); Pier Luca Maffettone (University of Naples Federico II, Italy); Sara Coppola (CNR-ISASI, Italy)
13:05 Au-NPs Functionalizaed Microneedles as Intelligent Components for Portable Devices
Sara Coppola (Institute of Applied Sciences & Intelligent Systems "E. Caianiello", Italy); Anna Palma (Institute of Applied Sciences and Intelligent Systems E. Caianiello, Italy); Veronica Vespini (CNR-ISASI, Italy); Concetta Di Natale (University of Naples Federico II, Italy); Simonetta Grilli (National Council of Research, Italy); Pietro Ferraro (ISASI CNR, Italy)

Tuesday, June 4 12:00 - 13:20

Session 4.2 - Special Session #01: Metrology and Instrumentation for Unmanned Aerial Vehicles

Room: Auditorium II
12:00 Study of the Torsional Phenomena in the Wing Structure of a Quadplane UAS
Mihai Cosmin Parparita, Jr and Paul Bere (Technical University of Cluj Napoca, Romania); Jerzy Józwik (Lublin University of Technology, Poland)
12:20 Novel Test-Bench for UAV Inertia Measurement Employing Direct-Drive Motors
Luca Nanu (Polytecnic University of Turin, Italy); Piero Gili (Politecnico di Torino, Italy)
12:40 Extended Kalman Filter Based Data Fusion Algorithm Implemented in a Sense and Avoid System for a Mini-UAV Application
Marco Fiorio, Roberto Galatolo and Gianpietro Di Rito (University of Pisa, Italy)
13:00 Model-Based Temperature Monitoring of the Internal Combustion Engine of a Lightweight Long-Endurance Fixed-Wing UAV
Aleksander Suti (INSA Toulouse, France); Gianpietro Di Rito (University of Pisa, Italy); Giuseppe Mattei (Sky Eye Systems srl, Italy)

Tuesday, June 4 12:00 - 13:20

Session 4.3 - Special Session #05: Emerging Trends in Multimodal Sensor Fusion for Enhanced Aerospace Metrology

Room: Auditorium III
Chair: Pasquale Longobardi (EPFL, Switzerland)
12:00 Thermomechanical Simulation of Laser Powder Bed Fusion for Ti-6Al-4V: A Study on Residual Stress and Impact of Laser Process Parameters Using Volumetric Heat Source
Helia MohammadKamal (University of Salerno, Italy); Fabrizia Caiazzo (University od Salerno, Italy)
12:20 Model-Based Fusion of GNSS and Multiple-IMUs
Aman Sharma, Jan Skaloud and Simon Gilgien (EPFL, Switzerland)
12:40 Above Ground Biomass Estimation in Agroforestry Environment by UAS and RGB Imagery
Andsera Adugna Mekonen (University of Naples Federico II, Italy); Domenico Accardo (Università degli Studi di Napoli FEDERICO II, Italy); Alfredo Renga (University of Naples Federico II, Italy)
13:00 4IPLAY - Improving Intelligent Infrastructure Inspection by Pushing UAS Level of AutonomY in Challenging Environments
Adriano Mancini (Dipartimento di Ingegneria dell'Informazione, Università Politecnica delle Marche, Italy); Alessandro Galdelli (Università Politecnica Delle Marche, Italy); Elisa Capello, Iris David Du Mutel David Du Mutel de Pierrepont and Stefano Primatesta (Politecnico di Torino, Italy); Giancarmine Fasano and Roberto Opromolla (University of Naples Federico II, Italy); Flavia Causa (University of Naples Federico II, Italy & University of Naples, Federico II, Italy); Federica Vitiello (University of Naples Federico II, Italy)

Tuesday, June 4 13:20 - 14:20

Lunch

Tuesday, June 4 14:30 - 16:15

Session 5.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART II

Room: Auditorium I
14:30 IDRA: A Concept for an Inflatable and Retractable Robotic Arm for ISAM
Pierpaolo Palmieri, Matteo Gaidano, Mario Troise, Laura Salamina, Matteo Melchiorre and Stefano Mauro (Politecnico di Torino, Italy)
14:50 EO Data Dissemination, Personal Data Processing and Privacy Compliance
Luigi Izzo (University of Naples Suor Orsola Benincasa, Italy); Carlo Campanile (Sapienza University of Rome, Italy)
15:05 Health in Space: Integrating Legal, Ethical and Sustainability Assessments
Ilaria Amelia Caggiano and Lucilla Gatt (Università Degli Studi Suor Orsola Benincasa, Italy); Anita Mollo (UNISOB, Italy); Luigi Izzo and Emiliano Troisi (University of Naples Suor Orsola Benincasa, Italy)
15:20 Exploring Brain Activity During Space Missions: Functional Near-Infrared Spectroscopy Insights and Beyond
Dariusz Zapała (Cortivision Sp., Italy)
15:40 PLATO: Looking for Extrasolar Planets by Measuring the Very Small Decrease in Brightness of a Star When the Planet Passes in Front of It
Donata Valletti (Thalesaleniaspace, Italy)
15:55 Wireless Power Transmission: A New Frontier for Lunar Colonisation Development
Stefano Mauro, Francesco Lopez, Anna Mauro and Domenico Edoardo Sfasciamuro (Politecnico di Torino, Italy); Andrea Villa (Oris SRL, Italy)

Tuesday, June 4 14:30 - 16:30

Session 5.2 - Special Track CASTAWAYS - Criteria and Technologies for the Development of a "New Space" Ecosystem

Room: Auditorium II
14:30 A Real/Fast-Time Simulator for Impact Assessment of Spoofing & Jamming Attacks on GNSS Receivers
Ivan Iudice (CIRA - Italian Aerospace Research Centre, Italy); Domenico Pascarella (CIRA scpa, Italy); Gianluca Corraro and Giovanni Cuciniello (CIRA, Italy)
14:50 Reconfigurable Fading Testbed for the Investigation of COTS Transceivers in OFLs
Carla Cantore (Polytechnic University of Bari, Italy); Ilaria Marasco (Politecnico di Bari, Italy); Davide Monopoli (Polytechnic University of Bari, Italy); Giovanni Magno (Politecnico di Bari, Italy)
15:10 An Advanced MIMO Multicarrier Framework for NTN-Based 5G Broadcast/Multicast Transmissions
Talha Faizur Rahman and Vuk Marojevic (Mississippi State University, USA); Claudio Sacchi (University of Trento, Italy)
15:30 A Survey on Wireless Communication and Power Transfer Systems for Space Applications
Vittorio U. Castrillo (CIRA - Italian Aerospace Research Centre, Italy); Francesco Fusco (CIRA, Italy); Hernan M. Giannetta (SpaceLab SpA, Italy); Marta Albano and Enrico Cavallini (Agenzia Spaziale Italiana, Italy)
15:50 Teleneurology Applications Based on the Internet of Remote Medical Things
Antonio Pallotti (Italian Space Agency, Italy); Charles Mwangi (Kenya Space Agency, Kenya); Munzer Jahjah (Italian Space Agency, Italy)
16:10 Graph Neural Network-Based C-RAN Monitoring for Beyond 5G Non-Terrestrial Networks
Henok Berhanu Tsegaye (University of New Mexico, USA); Claudio Sacchi (University of Trento, Italy)

Tuesday, June 4 14:30 - 16:30

Session 5.3 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART II

Room: Auditorium III
14:30 Evaluation of CNC Machine Tool's Noise Level Using a Measuring System
Daria Sałamacha and Jerzy Józwik (Lublin University of Technology, Poland)
14:54 Fire Test of an Equipment for Hydrogen Powered Aircraft
Tomasz Rogalski (Rzeszow University of Technology, Poland); Jacek Pieniążek and Piotr Cieciński (Politechnika Rzeszowska, Poland); Mirosław Szukiewicz, Marcin Drajewicz, Elżbieta Chmiel-Szukiewicz and Robert Smusz (Rzeszow University of Technology, Poland)
15:18 Experimental and Numerical Investigation of Energy Harvester Based on Magnetic Rolling Pendulum
Marek Borowiec and Marcin Bochenski (Lublin University of Technology, Poland); Tomasz Haniszewski (Silesian University of Technology, Poland)
15:42 Identification of Fatigue Wear of Compressor Rotor Blade of a General Electric J85 Turbojet Engine
Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Jerzy Józwik and Paweł Tomiło (Lublin University of Technology, Poland); Arkadiusz Tofil and Paweł Pioś (University of Applied Sciences in Chełm, Poland); Dariusz Mika (The University of Applied Sciences in Chełm, Poland)
16:06 The Effect of a Large Grounded Mesh Electrode and Two Types of High-Voltage (HV) Electrodes on Boundary Layer Control
Ernest Gnapowski and Sebastian Gnapowski (Lublin University of Technology, Poland); Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Jerzy Józwik (Lublin University of Technology, Poland); Grzegorz Skorulski (Bialystok University of Technology, Poland)

Tuesday, June 4 16:30 - 16:50

Coffee Break

Tuesday, June 4 16:50 - 17:40

Tutorial #1 - Konrad Jędrzejewski
Passive Radar Observation of Space Objects using LOFAR Radio Telescopes

Room: Auditorium I

Tuesday, June 4 16:50 - 17:40

Tutorial #2 - Jiří Zachardala
Personal flying will be available to everyone in less than two decades

Room: Auditorium II

Tuesday, June 4 20:00 - 23:00

Gala Dinner

Wednesday, June 5

Wednesday, June 5 9:30 - 10:30

Session 6.1 - Special Session #07: S2S - Space to Space: Scientific and Technological Challenges for Human and Robotic Space Exploration - PART III

Room: Auditorium I
9:30 Sowing Scheduling of Two Crop Types via Predictive Control in Adaptive Vertical Farms for Space
Patrizia Bagnerini (University of Genoa, Italy); Mauro Gaggero (National Research Council of Italy, Italy); Marco Ghio and Franco Malerba (Space V, Italy)
9:45 Thermal Simulations for the Laser Retro-Reflector Onboard Galileo 2nd Generation
Igor Di Varano (Inaf-Iaps, Italy); Mattia Tibuzzi (Laboratori Nazionale di Frascati (LNF) of Istituito Nazionale di Fisica, Italy); Lorenzo Salvatori (Laboratori Nazionale di Frascati (LNF) of Istituito Nazionale di Fisica Nucleare, Italy); Simone Dell'Agnello (Laboratori Nazionale di Frascati (LNF) of Istituto Nazionale di Fisica Nucleare (INFN), Italy)
10:00 A Framework for Testing Differential Throttling in Linear Aerospike Nozzle
Gaetano Maria Di Cicca, Roberto Marsilio, Emanuele Resta, Jehangir Hassan and Michele Ferlauto (Politecnico di Torino, Italy)
10:15 MISS: Multifunctional Smart Skin for Environmental Monitoring: Light and Flexible Structure Capable of Combining With a High Level of Integration Different Environmental Monitoring Parameters (Temper
Donata Valletti (Thalesaleniaspace, Italy)

Wednesday, June 5 9:30 - 11:10

Session 6.2 - Special Session #11: Aerodynamic Measurement and Control of Unmanned Aerial Vehicles

Room: Auditorium II
9:30 Ground Testing of an Electric Wheeled Propulsion System for a Light Aircraft
Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Łukasz Puzio and Adrian Nafalski (University College of Applied Sciences, Poland)
9:46 Performance Analysis of the Unmanned Aerial Vehicle Based on the Flight Test
Paweł Karpiński (University of Life Sciences in Lublin, Poland); Zbigniew Czyż (Polish Air Force University, Poland); Krzysztof Skiba (Lublin University of Technology, Poland); Stanisław Parafiniuk (University of Life Sciences in Lublin, Poland)
10:03 Preliminary Measurements for the Identification the Influence of the Test Object Support on the Aerodynamic Characteristics
Zbigniew Czyż (Polish Air Force University, Poland); Paweł Karpiński (University of Life Sciences in Lublin, Poland); Pawel Ruchala (Lukasiewicz Research Network - Institute of Aviation, Poland); Tomasz Zahorski (Polish Air Force University, Poland)
10:20 Research on Toroidal Propeller Driven by Air Ion Mechanics
Rafał Kliza and Mirosław Wendeker (Lublin University of Technology, Poland)
10:36 Aerodynamic Measurement of PROPWING Electric Drive System for UAVs in a Wind Tunnel
Jan Pytka (Lublin University of Technology, Poland); Jarosław Pytka (University College of Applied Sciences in Chelm, Poland & Lublin University of Technology, Poland); Zbigniew Czyż (Polish Air Force University, Poland)
10:53 Assessment of Measurement Uncertainty of Additively Manufactured Multi-Hole Probes
Pawel Ruchala (Lukasiewicz Research Network - Institute of Aviation, Poland); Kamil Zawadzki (Łukasiewicz Research Network - Institute of Aviation, Poland)

Wednesday, June 5 9:30 - 11:10

Session 6.3 - General Session - PART II

Room: Auditorium III
9:30 Feasibility Design of DIANA, a Dust Analyzer Developed for the Tianwen-2 Mission
Chiara Martina (Politecnico di Milano, Italy)
9:50 Feasibility Design of LD GRIDS, a Dust Analyzer for the Moon
Diego Scaccabarozzi and Abdelrahman Mohamed Ragab M Ahmed (Politecnico di Milano, Italy)
10:10 Feasibility Design of MiLi, a Miniaturized Lidar for Mars Observation
Diego Scaccabarozzi and Kirill A. Potemkin (Politecnico di Milano, Italy); Bortolino Saggin (Università degli Studi di Padova, Italy); Marco Giovanni Corti and Chiara Martina (Politecnico di Milano, Italy); Alberto Martin-Ortega (INTA, Spain)
10:30 Sustainable Space Agriculture: Biodegradable Sensors Redefining Greenhouse Monitoring Beyond Earth
Elena Palmieri, Francesco Maita, Ivano Lucarini, Jose Ignacio Del Rio De Vicente, Antonio Minotti and Luca Maiolo (CNR-IMM, Italy)
10:50 A Precise Positioning Methodology for Autonomous Navigation of a Tethered UAV for Photogrammetry
Alberto Jiménez Hormeño, David Martin Gomez and Arturo de la Escalera (Universidad Carlos III de Madrid, Spain); José María Armingol (University Carlos III of Madrid, Spain)

Wednesday, June 5 11:10 - 11:30

Coffee Break

Wednesday, June 5 11:30 - 12:30

Keynote Session #3 - Philip Johannes Steinbild
Artificial Neural Networks for Signal Analysis of Electrical Time Domain Reflectometry Based Sensors

Wednesday, June 5 12:30 - 13:20

Tutorial #3 - Paweł Magryta, Konrad Pietrykowski
Wind power - Custom wind tunnel and gyrocopter presentation

Wednesday, June 5 13:20 - 14:30

Lunch

Wednesday, June 5 14:30 - 15:00

Poster Session

Design of Wireless Optical System for Data Transmission Inside the Aircraft Cabin
Fabio Leccese ("Roma Tre" University, Italy); Giuseppe Schirripa Spagnolo (University of "Roma Tre", Italy)
A New Approach to Reliability Evaluation and Fault Diagnosis of UAV as a Complex System
Enrico Petritoli (Università degli Studi "Roma Tre", Italy); Fabio Leccese ("Roma Tre" University, Italy)
CO2 Conversion Into Methane Over Ru/CeO2 Catalysts Prepared From Different Metal Ion Precursors
Umberto Pasqual Laverdura and Rosa Chierchia (ENEA, Italy); Seyed Sepehr Moeini, Claudia Romano, Fabio Leccese and Simonetta Tuti ("Roma Tre" University, Italy)
Simulation of Experimental Tests in Electronic Devices
Roberto Paggi and Gian Luca Mariotti (ItalConsul, Italy); Fabio Leccese ("Roma Tre" University, Italy); Anna Paggi (ItalConsul, Italy)
3D LiDAR Sensor Characterization for Obstacle Detection in Autonomous UAS Applications
Aniello Menichino (Italian Aerospace Research Centre - CIRA, Italy); Antonio Serpico (University of Campania L. Vanvitelli, Italy); Vittorio Di Vito (CIRA Italian Aerospace Research Center, Italy); Gennaro Ariante (University of Naples Parthenope, Italy); Salvatore Ponte (University of Campania "L. Vanvitelli", Italy); Giuseppe Del Core (University of Naples Parthenope, Italy)
Aircraft Detection Approach Based on YOLOv9 for High-Resolution Remote Sensing
Ivan Saetchnikov, Victor Skakun and Elina Tcherniavskaia (Belarusian State University, Belarus)
Enhancing TCVCXO Stability Using the 1 PPS Signal From the GPS
Piotr Warda (Lublin University of Technology, Poland); Ryszard Szplet, Dominik Sondej and Pawel Kwiatkowski (Military University of Technology, Poland)
Assessing COTS Sensor Suitability for CubeSat Missions in Near-Space Environments
Karen Vidaurre Torrez (Universidad Catolica Boliviana & CIDIMEC, Bolivia); Franklin Ticona Coaquira (Beihang University, China); Miguel Silva Plata, Abigail Lopez Tarqui, Guillermo Auza Banegas, Jazmin Jimenez Huanca and Nayara Lara Ramos (Universidad Católica Boliviana & CIDIMEC, Bolivia); Fabio Diaz Palacios (Universidad Privada del Valle, Bolivia & Universidad del Valle de Atemajac, Mexico)
Analysis of Selected Physical Phenomena Accompanying the Cutting Process With a High-Pressure Abrasive Waterjet and Their Influence on Geometric Structure of the Surface
Michał Leleń and Jerzy Józwik (Lublin University of Technology, Poland); Grzegorz Skorulski (Bialystok University of Technology, Poland)
Reproducibility of Properties of the Zirconia-Based Composites
Edvin Hevorkian (University of Life Sciences in Lublin, Poland); Jerzy Józwik (Lublin University of Technology, Poland); Vasyl Kolodnitskyi (National Academy of Sciences of Ukraine, Poland); Miroslaw Rucki (Kazimierz Pulaski University of Technology and Humanities in Radom, Poland); Oksana Morozova (Ukrainian State University of Railway Transport, Poland); Krzysztof Dziedzic (Lublin University of Technology, Poland)
A Method of Doppler Navigation Using Only Unidirectional Two Antenna Beams
Tao Yu (China Academy of Managemen Science. Beijing, China)

Wednesday, June 5 15:00 - 16:00

Session 7.1 - Special Session #10: Optical and Innovative Sensors for Aerospace

Room: Auditorium I
15:00 Smart Composites Manufacturing and Testing by Insertion of Fiber Bragg Gratings Sensors
Alessandro Aimasso, Andrea Facci, Matteo Bertone and Matteo Davide Lorenzo Dalla Vedova (Politecnico di Torino, Italy)
15:20 A Wavelet-Based Method for Defect Detection in Aircraft Components by Using Ultrasonic Technology
Cosimo Patruno and Adriano Liso (STIIMA-CNR, Italy); Vito Renò (STIIMA CNR - Bari, Italy); Veronica Vespini, Sara Coppola and Pietro Ferraro (CNR-ISASI, Italy); Nicola Gallo and Giuseppe Del Prete (Leonardo S.p.A. Divisione Aerostrutture, Italy); Valerio Dentico (Leonardo S.p.A., Italy); Davide Chirico (Leonardo S.p.A. Divisione Aerostrutture, Italy); Ettore Stella (CNR STIIMA, Italy)
15:40 Augmented Reality Visualization of Fiber Bragg Grating Sensor Data for Aerospace Application
Antonio Costantino Marceddu, Alessandro Aimasso, Matteo Bertone, Luca Viscanti, Bartolomeo Montrucchio, Paolo Maggiore and Matteo Davide Lorenzo Dalla Vedova (Politecnico di Torino, Italy)

Wednesday, June 5 15:00 - 16:20

Session 7.2 - Special Session #04: Manufacturing and Metrology in the Aerospace Industry - PART III

Room: Auditorium II
15:00 Geometric Structure of the Surface of Impulse Shot-Peened Titanium Alloy Ti6Al4V
Agnieszka Skoczylas, Jakub Matuszak, Krzysztof Ciecieląg and Kazimierz Zaleski (Lublin University of Technology, Poland)
15:20 Measurement of Cutting Forces in Conventional and Climb Milling by Recurrence Analysis
Krzysztof Ciecieląg, Agnieszka Skoczylas and Jakub Matuszak (Lublin University of Technology, Poland)
15:40 Evaluation of the Dimensional Accuracy of a Milled Thin-Walled Part as Measured With a CNC Machine Tool Inspection Probe and a Coordinate Measuring Machine
Magdalena Zawada-Michałowska and Paweł Pieśko (Lublin University of Technology, Poland)
16:00 Influence of Weather Conditions and Thermal Shocks on the Surface Properties of Epoxy Composites With TiO2
Ewelina Kosicka (Lublin University of Technology, Poland); Robert Szczepaniak (Military University of Aviation, Poland)

Wednesday, June 5 15:00 - 16:00

Session 7.3 - General Session - PART III

Room: Auditorium III
15:00 Data-Driven Identification for Model Predictive Control of a Ground Robot
Fabio Faliero, Enza Incoronata Trombetta and Elisa Capello (Politecnico di Torino, Italy)
15:20 Preliminary Design Optimization Tool for Lighter-Than-Air Platform With Different On-Board Power Systems
Luca de Pasquale and Piero Gili (Politecnico di Torino, Italy)
15:40 Optimizing Energy Consumption of the UAV Swarm Performing Coverage Task With Stochastic Sweep Coverage Control Algorithm
Michał Duda (Military University of Technology in Warsaw, Poland); Krzysztof Falkowski (Military University of Technology, Poland)

Wednesday, June 5 16:20 - 16:40

Coffee Break

Wednesday, June 5 16:40 - 17:00

Closing and Award Ceremony